[libgloss]

* configure.in: Add rl78.
* configure: Regenerate.
* rl78: New directory

[newlib]
* configure.host: Add rl78.
* libc/include/machine/ieeefp.h: Add rl78 support.
* libc/include/machine/setjmp.h: Add rl78 support.
* libc/machine/configure.in: Add rl78.
* libc/machine/rl78: New directory.

1 files changed, 107 insertions, 0 deletions

diff --git a/libgloss/rl78/write.c b/libgloss/rl78/write.c
new file mode 100644
index 000000000..2adeb94f1
--- /dev/null
+++ b/libgloss/rl78/write.c
@@ -0,0 +1,107 @@
+/*
+
+Copyright (c) 2010 Red Hat Incorporated.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without 
+modification, are permitted provided that the following conditions are met: 
+
+    Redistributions of source code must retain the above copyright 
+    notice, this list of conditions and the following disclaimer.
+
+    Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+    The name of Red Hat Incorporated may not be used to endorse 
+    or promote products derived from this software without specific 
+    prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED.  IN NO EVENT SHALL RED HAT INCORPORATED BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 
+
+*/
+
+/* These definitions are for the RL78/G13, which the simulator
+   simulates.  */
+
+typedef unsigned char UQI __attribute__((mode(QI)));
+typedef unsigned int UHI __attribute__((mode(HI)));
+
+#define s8(x)	(*(volatile UQI *)(x))
+#define s16(x)	(*(volatile UHI *)(x))
+
+#define P(x)	s8(0xfff00+(x))
+#define PM(x)	s8(0xfff20+(x))
+
+#define PER0	s8(0xf00f0)
+
+#define SSR00	s16(0xf0100)
+#define SMR00	s16(0xf0110)
+#define SCR00	s16(0xf0118)
+#define SS0	s16(0xf0122)
+#define SPS0	s16(0xf0126)
+#define SO0	s16(0xf0128)
+#define SOE0	s16(0xf012a)
+#define SOL0	s16(0xf0134)
+
+#define SDR00	s16(0xfff10)
+
+static int initted = 0;
+
+static void
+init_uart0 ()
+{
+  initted = 1;
+
+  PER0 = 0xff;
+  SPS0 = 0x0011; /* 16 MHz */
+  SMR00 = 0x0022; /* uart mode */
+  SCR00 = 0x8097; /* 8-N-1 */
+  SDR00 = 0x8a00; /* baud in MSB - 115200 */
+  SOL0 = 0x0000; /* not inverted */
+  SO0 = 0x000f; /* initial value */
+  SOE0 = 0x0001; /* enable TxD0 */
+  P(1)  |= 0b00000100;
+  PM(1) &= 0b11111011;
+  SS0 = 0x0001;
+}
+
+static void
+tputc (char c)
+{
+  /* Wait for transmit buffer to be empty.  */
+  while (SSR00 & 0x0020)
+    asm("");
+  /* Transmit that byte.  */
+  SDR00 = c;
+}
+
+int
+_write(int fd, char *ptr, int len)
+{
+  int rv = len;
+
+  if (!initted)
+    init_uart0 ();
+
+  while (len != 0)
+    {
+      if (*ptr == '\n')
+	tputc ('\r');
+      tputc (*ptr);
+      ptr ++;
+      len --;
+    }
+  return rv;
+}
+
+char * write (int) __attribute__((weak, alias ("_write")));