This commit was manufactured by cvs2svn to create branchmultiprocess-20081120-branchpoint

'multiprocess-20081120-branch'. Sprout from master 2008-11-19 18:25:19 UTC Bob Wilson <bob.wilson@acm.org> 'include/' Cherrypick from cygnus 1999-05-03 07:29:06 UTC Richard Henderson <rth@redhat.com> '19990502 sourceware import': README config/mt-d30v config/mt-netware config/mt-ospace etc/add-log.el etc/add-log.vi etc/configbuild.ein etc/configbuild.fig etc/configbuild.jin etc/configbuild.tin etc/configdev.ein etc/configdev.fig etc/configdev.jin etc/configdev.tin include/aout/hppa.h include/coff/sym.h include/fopen-bin.h include/fopen-same.h include/opcode/tahoe.h makefile.vms Delete: libgloss/ChangeLog libgloss/Makefile.in libgloss/README libgloss/acinclude.m4 libgloss/aclocal.m4 libgloss/arm/Makefile.in libgloss/arm/_exit.c libgloss/arm/_kill.c libgloss/arm/aclocal.m4 libgloss/arm/coff-iq80310.specs libgloss/arm/coff-pid.specs libgloss/arm/coff-rdimon.specs libgloss/arm/coff-rdpmon.specs libgloss/arm/coff-redboot.ld libgloss/arm/coff-redboot.specs libgloss/arm/configure libgloss/arm/configure.in libgloss/arm/crt0.S libgloss/arm/elf-iq80310.specs libgloss/arm/elf-linux.specs libgloss/arm/elf-pid.specs libgloss/arm/elf-rdimon.specs libgloss/arm/elf-rdpmon.specs libgloss/arm/elf-redboot.ld libgloss/arm/elf-redboot.specs libgloss/arm/libcfunc.c libgloss/arm/linux-crt0.c libgloss/arm/linux-syscall.h libgloss/arm/linux-syscalls0.S libgloss/arm/linux-syscalls1.c libgloss/arm/redboot-crt0.S libgloss/arm/redboot-syscalls.c libgloss/arm/swi.h libgloss/arm/syscall.h libgloss/arm/syscalls.c libgloss/arm/trap.S libgloss/bfin/Makefile.in libgloss/bfin/aclocal.m4 libgloss/bfin/basiccrt.S libgloss/bfin/bf522.ld libgloss/bfin/bf523.ld libgloss/bfin/bf524.ld libgloss/bfin/bf525.ld libgloss/bfin/bf526.ld libgloss/bfin/bf527.ld libgloss/bfin/bf531.ld libgloss/bfin/bf532.ld libgloss/bfin/bf533.ld libgloss/bfin/bf534.ld libgloss/bfin/bf536.ld libgloss/bfin/bf537.ld libgloss/bfin/bf538.ld libgloss/bfin/bf539.ld libgloss/bfin/bf542.ld libgloss/bfin/bf544.ld libgloss/bfin/bf547.ld libgloss/bfin/bf548.ld libgloss/bfin/bf549.ld libgloss/bfin/bf561.ld libgloss/bfin/bf561a.ld libgloss/bfin/bf561b.ld libgloss/bfin/bf561m.ld libgloss/bfin/bfin-common-mc.ld libgloss/bfin/bfin-common-sc.ld libgloss/bfin/configure libgloss/bfin/configure.in libgloss/bfin/crt0.S libgloss/bfin/include/blackfin.h libgloss/bfin/include/cdefBF522.h libgloss/bfin/include/cdefBF525.h libgloss/bfin/include/cdefBF527.h libgloss/bfin/include/cdefBF52x_base.h libgloss/bfin/include/cdefBF531.h libgloss/bfin/include/cdefBF532.h libgloss/bfin/include/cdefBF533.h libgloss/bfin/include/cdefBF534.h libgloss/bfin/include/cdefBF535.h libgloss/bfin/include/cdefBF536.h libgloss/bfin/include/cdefBF537.h libgloss/bfin/include/cdefBF538.h libgloss/bfin/include/cdefBF539.h libgloss/bfin/include/cdefBF53x.h libgloss/bfin/include/cdefBF541.h libgloss/bfin/include/cdefBF542.h libgloss/bfin/include/cdefBF544.h libgloss/bfin/include/cdefBF547.h libgloss/bfin/include/cdefBF548.h libgloss/bfin/include/cdefBF549.h libgloss/bfin/include/cdefBF54x_base.h libgloss/bfin/include/cdefBF561.h libgloss/bfin/include/cdef_LPBlackfin.h libgloss/bfin/include/cdefblackfin.h libgloss/bfin/include/cplb.h libgloss/bfin/include/cplbtab.h libgloss/bfin/include/defBF522.h libgloss/bfin/include/defBF525.h libgloss/bfin/include/defBF527.h libgloss/bfin/include/defBF52x_base.h libgloss/bfin/include/defBF531.h libgloss/bfin/include/defBF532.h libgloss/bfin/include/defBF533.h libgloss/bfin/include/defBF534.h libgloss/bfin/include/defBF535.h libgloss/bfin/include/defBF536.h libgloss/bfin/include/defBF537.h libgloss/bfin/include/defBF538.h libgloss/bfin/include/defBF539.h libgloss/bfin/include/defBF541.h libgloss/bfin/include/defBF542.h libgloss/bfin/include/defBF544.h libgloss/bfin/include/defBF547.h libgloss/bfin/include/defBF548.h libgloss/bfin/include/defBF549.h libgloss/bfin/include/defBF54x_base.h libgloss/bfin/include/defBF561.h libgloss/bfin/include/def_LPBlackfin.h libgloss/bfin/include/defblackfin.h libgloss/bfin/include/sys/_adi_platform.h libgloss/bfin/include/sys/anomaly_macros_rtl.h libgloss/bfin/include/sys/excause.h libgloss/bfin/include/sys/exception.h libgloss/bfin/include/sys/mc_typedef.h libgloss/bfin/include/sys/platform.h libgloss/bfin/include/sys/pll.h libgloss/bfin/include/sysreg.h libgloss/bfin/syscalls.c libgloss/close.c libgloss/config/default.mh libgloss/config/default.mt libgloss/config/dos.mh libgloss/config/mips.mt libgloss/config/mn10200.mt libgloss/config/mn10300.mt libgloss/config/ppc.mh libgloss/configure libgloss/configure.in libgloss/cris/Makefile.in libgloss/cris/aclocal.m4 libgloss/cris/configure libgloss/cris/configure.in libgloss/cris/crt0.S libgloss/cris/crti.c libgloss/cris/crtn.c libgloss/cris/gensyscalls libgloss/cris/irqtable.S libgloss/cris/lcrt0.c libgloss/cris/linunistd.h libgloss/cris/outbyte.c libgloss/cris/setup.S libgloss/crx/Makefile.in libgloss/crx/_exit.c libgloss/crx/_getenv.c libgloss/crx/_rename.c libgloss/crx/aclocal.m4 libgloss/crx/close.c libgloss/crx/configure libgloss/crx/configure.in libgloss/crx/crt0.S libgloss/crx/crti.S libgloss/crx/crtn.S libgloss/crx/dvz_hndl.c libgloss/crx/flg_hndl.c libgloss/crx/fstat.c libgloss/crx/getpid.c libgloss/crx/iad_hndl.c libgloss/crx/intable.c libgloss/crx/isatty.c libgloss/crx/kill.c libgloss/crx/lseek.c libgloss/crx/open.c libgloss/crx/putnum.c libgloss/crx/read.c libgloss/crx/sbrk.c libgloss/crx/sim.ld libgloss/crx/stat.c libgloss/crx/svc_hndl.c libgloss/crx/time.c libgloss/crx/und_hndl.c libgloss/crx/unlink.c libgloss/crx/write.c libgloss/d30v/Makefile.in libgloss/d30v/aclocal.m4 libgloss/d30v/configure libgloss/d30v/configure.in libgloss/d30v/crt0.S libgloss/d30v/inbyte.c libgloss/d30v/outbyte.c libgloss/d30v/syscalls.c libgloss/debug.c libgloss/debug.h libgloss/doc/Makefile.in libgloss/doc/configure libgloss/doc/configure.in libgloss/doc/porting.texi libgloss/fr30/Makefile.in libgloss/fr30/aclocal.m4 libgloss/fr30/configure libgloss/fr30/configure.in libgloss/fr30/crt0.s libgloss/fr30/syscalls.c libgloss/frv/Makefile.in libgloss/frv/aclocal.m4 libgloss/frv/configure libgloss/frv/configure.in libgloss/frv/crt0.S libgloss/frv/fstat.c libgloss/frv/getpid.c libgloss/frv/isatty.c libgloss/frv/kill.c libgloss/frv/print.c libgloss/frv/putnum.c libgloss/frv/sbrk.c libgloss/frv/sim-close.S libgloss/frv/sim-exit.S libgloss/frv/sim-inbyte.c libgloss/frv/sim-lseek.S libgloss/frv/sim-open.S libgloss/frv/sim-read.S libgloss/frv/sim-time.c libgloss/frv/sim-unlink.S libgloss/frv/sim-write.S libgloss/frv/stat.c libgloss/fstat.c libgloss/getpid.c libgloss/glue.h libgloss/hp74x/Makefile.in libgloss/hp74x/README libgloss/hp74x/aclocal.m4 libgloss/hp74x/checksum.c libgloss/hp74x/configure libgloss/hp74x/configure.in libgloss/hp74x/crt0.s libgloss/hp74x/debugger.h libgloss/hp74x/debugger.s libgloss/hp74x/diagnose.h libgloss/hp74x/hppa-defs.h libgloss/hp74x/hppa.ld libgloss/hp74x/io.c libgloss/hp74x/iva_table.h libgloss/hp74x/iva_table.s libgloss/hp74x/pa_stub.c libgloss/hp74x/test.c libgloss/i386/Makefile.in libgloss/i386/aclocal.m4 libgloss/i386/configure libgloss/i386/configure.in libgloss/i386/cygmon-crt0.S libgloss/i386/cygmon-gmon.c libgloss/i386/cygmon-gmon.h libgloss/i386/cygmon-salib.c libgloss/i386/cygmon-syscall.h libgloss/i386/cygmon.ld libgloss/i960/Makefile.in libgloss/i960/aclocal.m4 libgloss/i960/asm.h libgloss/i960/configure libgloss/i960/configure.in libgloss/i960/crt0.c libgloss/i960/mon-read.c libgloss/i960/mon-syscalls.S libgloss/i960/mon-write.c libgloss/i960/mon960.c libgloss/i960/mon960.ld libgloss/i960/syscall.h libgloss/iq2000/Makefile.in libgloss/iq2000/_exit.c libgloss/iq2000/access.c libgloss/iq2000/aclocal.m4 libgloss/iq2000/chmod.c libgloss/iq2000/chown.c libgloss/iq2000/close.c libgloss/iq2000/configure libgloss/iq2000/configure.in libgloss/iq2000/creat.c libgloss/iq2000/crt0.S libgloss/iq2000/crt1.c libgloss/iq2000/execv.c libgloss/iq2000/execve.c libgloss/iq2000/fork.c libgloss/iq2000/fstat.c libgloss/iq2000/getpid.c libgloss/iq2000/gettime.c libgloss/iq2000/isatty.c libgloss/iq2000/kill.c libgloss/iq2000/lseek.c libgloss/iq2000/open.c libgloss/iq2000/pipe.c libgloss/iq2000/read.c libgloss/iq2000/sbrk.c libgloss/iq2000/sim.ld libgloss/iq2000/stat.c libgloss/iq2000/test.c libgloss/iq2000/time.c libgloss/iq2000/times.c libgloss/iq2000/trap.c libgloss/iq2000/trap.h libgloss/iq2000/unlink.c libgloss/iq2000/utime.c libgloss/iq2000/wait.c libgloss/iq2000/write.c libgloss/isatty.c libgloss/kill.c libgloss/libnosys/Makefile.in libgloss/libnosys/_exit.c libgloss/libnosys/acconfig.h libgloss/libnosys/aclocal.m4 libgloss/libnosys/chown.c libgloss/libnosys/close.c libgloss/libnosys/config.h.in libgloss/libnosys/configure libgloss/libnosys/configure.in libgloss/libnosys/environ.c libgloss/libnosys/errno.c libgloss/libnosys/execve.c libgloss/libnosys/fork.c libgloss/libnosys/fstat.c libgloss/libnosys/getpid.c libgloss/libnosys/gettod.c libgloss/libnosys/isatty.c libgloss/libnosys/kill.c libgloss/libnosys/link.c libgloss/libnosys/lseek.c libgloss/libnosys/open.c libgloss/libnosys/read.c libgloss/libnosys/readlink.c libgloss/libnosys/sbrk.c libgloss/libnosys/stat.c libgloss/libnosys/symlink.c libgloss/libnosys/times.c libgloss/libnosys/unlink.c libgloss/libnosys/wait.c libgloss/libnosys/warning.h libgloss/libnosys/write.c libgloss/lseek.c libgloss/m32c/Makefile.in libgloss/m32c/abort.S libgloss/m32c/aclocal.m4 libgloss/m32c/argv.S libgloss/m32c/argvlen.S libgloss/m32c/chdir.S libgloss/m32c/chmod.S libgloss/m32c/close.S libgloss/m32c/configure libgloss/m32c/configure.in libgloss/m32c/crt0.S libgloss/m32c/crtn.S libgloss/m32c/exit.S libgloss/m32c/fstat.S libgloss/m32c/genscript libgloss/m32c/getpid.S libgloss/m32c/gettimeofday.S libgloss/m32c/heaptop.S libgloss/m32c/isatty.S libgloss/m32c/kill.S libgloss/m32c/link.S libgloss/m32c/lseek.S libgloss/m32c/m32c.tmpl libgloss/m32c/m32csys.h libgloss/m32c/open.S libgloss/m32c/read.S libgloss/m32c/sample.c libgloss/m32c/sbrk.c libgloss/m32c/stat.S libgloss/m32c/time.S libgloss/m32c/times.S libgloss/m32c/unlink.S libgloss/m32c/utime.S libgloss/m32c/varvects.S libgloss/m32c/varvects.h libgloss/m32c/write.S libgloss/m32r/Makefile.in libgloss/m32r/aclocal.m4 libgloss/m32r/chmod.c libgloss/m32r/close.c libgloss/m32r/configure libgloss/m32r/configure.in libgloss/m32r/crt0.S libgloss/m32r/eit.h libgloss/m32r/eva-stub.ld libgloss/m32r/eva.ld libgloss/m32r/exit.c libgloss/m32r/fstat.c libgloss/m32r/getpid.c libgloss/m32r/isatty.c libgloss/m32r/kill.c libgloss/m32r/lseek.c libgloss/m32r/m32r-lib.c libgloss/m32r/m32r-stub.c libgloss/m32r/mon.specs libgloss/m32r/open.c libgloss/m32r/raise.c libgloss/m32r/read.c libgloss/m32r/sbrk.c libgloss/m32r/stat.c libgloss/m32r/trap0.S libgloss/m32r/trapmon0.c libgloss/m32r/unlink.c libgloss/m32r/utime.c libgloss/m32r/write.c libgloss/m68hc11/Makefile.in libgloss/m68hc11/aclocal.m4 libgloss/m68hc11/configure libgloss/m68hc11/configure.in libgloss/m68hc11/crt0.S libgloss/m68hc11/sci-inout.S libgloss/m68hc11/sim-valid-m68hc11.ld libgloss/m68hc11/sim-valid-m68hc12.ld libgloss/m68hc11/syscalls.c libgloss/m68k/Makefile.in libgloss/m68k/README libgloss/m68k/aclocal.m4 libgloss/m68k/asm.h libgloss/m68k/bcc.ld libgloss/m68k/cf-crt0.S libgloss/m68k/cf-crt1.c libgloss/m68k/cf-exit.c libgloss/m68k/cf-hosted.S libgloss/m68k/cf-isrs.c libgloss/m68k/cf-isv.S libgloss/m68k/cf-sbrk.c libgloss/m68k/cf.sc libgloss/m68k/configure libgloss/m68k/configure.in libgloss/m68k/cpu32bug.S libgloss/m68k/cpu32bug.h libgloss/m68k/crt0.S libgloss/m68k/dtor.C libgloss/m68k/fido-_exit.c libgloss/m68k/fido-crt0.S libgloss/m68k/fido-handler.c libgloss/m68k/fido-hosted.S libgloss/m68k/fido-sbrk.c libgloss/m68k/fido.h libgloss/m68k/fido.sc libgloss/m68k/fido_profiling.h libgloss/m68k/idp-inbyte.c libgloss/m68k/idp-outbyte.c libgloss/m68k/idp.ld libgloss/m68k/idpgdb.ld libgloss/m68k/io-close.c libgloss/m68k/io-exit.c libgloss/m68k/io-fstat.c libgloss/m68k/io-gdb.c libgloss/m68k/io-gettimeofday.c libgloss/m68k/io-isatty.c libgloss/m68k/io-lseek.c libgloss/m68k/io-open.c libgloss/m68k/io-read.c libgloss/m68k/io-rename.c libgloss/m68k/io-stat.c libgloss/m68k/io-system.c libgloss/m68k/io-time.c libgloss/m68k/io-unlink.c libgloss/m68k/io-write.c libgloss/m68k/io.h libgloss/m68k/leds.c libgloss/m68k/leds.h libgloss/m68k/mc68681reg.h libgloss/m68k/mc68ec.c libgloss/m68k/mvme-stub.c libgloss/m68k/mvme.S libgloss/m68k/mvme135-asm.S libgloss/m68k/mvme135.ld libgloss/m68k/mvme162.ld libgloss/m68k/mvme162lx-asm.S libgloss/m68k/sbc5204.ld libgloss/m68k/sbc5206.ld libgloss/m68k/sim-abort.c libgloss/m68k/sim-crt0.S libgloss/m68k/sim-errno.c libgloss/m68k/sim-funcs.c libgloss/m68k/sim-inbyte.c libgloss/m68k/sim-print.c libgloss/m68k/sim-sbrk.c libgloss/m68k/sim.ld libgloss/m68k/simulator.S libgloss/m68k/test.c libgloss/mcore/Makefile.in libgloss/mcore/aclocal.m4 libgloss/mcore/close.c libgloss/mcore/cmb-exit.c libgloss/mcore/cmb-inbyte.c libgloss/mcore/cmb-outbyte.c libgloss/mcore/configure libgloss/mcore/configure.in libgloss/mcore/crt0.S libgloss/mcore/elf-cmb.ld libgloss/mcore/elf-cmb.specs libgloss/mcore/fstat.c libgloss/mcore/getpid.c libgloss/mcore/kill.c libgloss/mcore/lseek.c libgloss/mcore/open.c libgloss/mcore/pe-cmb.ld libgloss/mcore/pe-cmb.specs libgloss/mcore/print.c libgloss/mcore/putnum.c libgloss/mcore/raise.c libgloss/mcore/read.c libgloss/mcore/sbrk.c libgloss/mcore/stat.c libgloss/mcore/syscalls.S libgloss/mcore/unlink.c libgloss/mcore/write.c libgloss/mep/Makefile.in libgloss/mep/aclocal.m4 libgloss/mep/configure libgloss/mep/configure.in libgloss/mep/crt0.S libgloss/mep/crtn.S libgloss/mep/fmax.ld libgloss/mep/gcov-io.h libgloss/mep/gmap_default.ld libgloss/mep/h_reset.c libgloss/mep/handlers.c libgloss/mep/isatty.c libgloss/mep/mep-bb.c libgloss/mep/mep-gmon.c libgloss/mep/min.ld libgloss/mep/read.c libgloss/mep/sbrk.c libgloss/mep/sdram-crt0.S libgloss/mep/sim-crt0.S libgloss/mep/sim-crtn.S libgloss/mep/simnovec-crt0.S libgloss/mep/simple.ld libgloss/mep/simsdram-crt0.S libgloss/mep/syscalls.S libgloss/mep/write.c libgloss/mips/Makefile.in libgloss/mips/aclocal.m4 libgloss/mips/array-io.c libgloss/mips/array.ld libgloss/mips/cfe.c libgloss/mips/cfe.ld libgloss/mips/cfe_api.c libgloss/mips/cfe_api.h libgloss/mips/cfe_api_int.h libgloss/mips/cfe_error.h libgloss/mips/cfe_mem.c libgloss/mips/cma101.c libgloss/mips/configure libgloss/mips/configure.in libgloss/mips/crt0.S libgloss/mips/crt0_cfe.S libgloss/mips/crt0_cygmon.S libgloss/mips/cygmon.c libgloss/mips/ddb-kseg0.ld libgloss/mips/ddb.ld libgloss/mips/dtor.C libgloss/mips/dve.ld libgloss/mips/dvemon.c libgloss/mips/entry.S libgloss/mips/idt.ld libgloss/mips/idt32.ld libgloss/mips/idt64.ld libgloss/mips/idtecoff.ld libgloss/mips/idtmon.S libgloss/mips/jmr3904-io.c libgloss/mips/jmr3904app-java.ld libgloss/mips/jmr3904app.ld libgloss/mips/jmr3904dram-java.ld libgloss/mips/jmr3904dram.ld libgloss/mips/lsi.ld libgloss/mips/lsipmon.S libgloss/mips/nullmon.c libgloss/mips/nullmon.ld libgloss/mips/pmon.S libgloss/mips/pmon.ld libgloss/mips/regs.S libgloss/mips/syscalls.c libgloss/mips/test.c libgloss/mips/vr4300.S libgloss/mips/vr5xxx.S libgloss/mn10200/Makefile.in libgloss/mn10200/_exit.c libgloss/mn10200/access.c libgloss/mn10200/aclocal.m4 libgloss/mn10200/chmod.c libgloss/mn10200/chown.c libgloss/mn10200/close.c libgloss/mn10200/configure libgloss/mn10200/configure.in libgloss/mn10200/creat.c libgloss/mn10200/crt0.S libgloss/mn10200/crt1.c libgloss/mn10200/eval.ld libgloss/mn10200/execv.c libgloss/mn10200/execve.c libgloss/mn10200/fork.c libgloss/mn10200/fstat.c libgloss/mn10200/getpid.c libgloss/mn10200/gettime.c libgloss/mn10200/isatty.c libgloss/mn10200/kill.c libgloss/mn10200/lseek.c libgloss/mn10200/open.c libgloss/mn10200/pipe.c libgloss/mn10200/read.c libgloss/mn10200/sbrk.c libgloss/mn10200/sim.ld libgloss/mn10200/stat.c libgloss/mn10200/test.c libgloss/mn10200/time.c libgloss/mn10200/times.c libgloss/mn10200/trap.S libgloss/mn10200/trap.h libgloss/mn10200/unlink.c libgloss/mn10200/utime.c libgloss/mn10200/wait.c libgloss/mn10200/write.c libgloss/mn10300/Makefile.in libgloss/mn10300/_exit.c libgloss/mn10300/access.c libgloss/mn10300/aclocal.m4 libgloss/mn10300/asb2303.ld libgloss/mn10300/asb2305.ld libgloss/mn10300/chmod.c libgloss/mn10300/chown.c libgloss/mn10300/close.c libgloss/mn10300/configure libgloss/mn10300/configure.in libgloss/mn10300/creat.c libgloss/mn10300/crt0-eval.S libgloss/mn10300/crt0.S libgloss/mn10300/crt0_cygmon.S libgloss/mn10300/crt0_redboot.S libgloss/mn10300/crt1.c libgloss/mn10300/cygmon.c libgloss/mn10300/eval.ld libgloss/mn10300/execv.c libgloss/mn10300/execve.c libgloss/mn10300/fork.c libgloss/mn10300/fstat.c libgloss/mn10300/getpid.c libgloss/mn10300/gettime.c libgloss/mn10300/isatty.c libgloss/mn10300/kill.c libgloss/mn10300/lseek.c libgloss/mn10300/open.c libgloss/mn10300/pipe.c libgloss/mn10300/read.c libgloss/mn10300/sbrk.c libgloss/mn10300/sim.ld libgloss/mn10300/stat.c libgloss/mn10300/test.c libgloss/mn10300/time.c libgloss/mn10300/times.c libgloss/mn10300/trap.S libgloss/mn10300/trap.h libgloss/mn10300/unlink.c libgloss/mn10300/utime.c libgloss/mn10300/wait.c libgloss/mn10300/write.c libgloss/mt/16-002.ld libgloss/mt/16-003.ld libgloss/mt/64-001.ld libgloss/mt/Makefile.in libgloss/mt/access.c libgloss/mt/aclocal.m4 libgloss/mt/chmod.c libgloss/mt/close.c libgloss/mt/configure libgloss/mt/configure.in libgloss/mt/crt0-16-002.S libgloss/mt/crt0-16-003.S libgloss/mt/crt0-64-001.S libgloss/mt/crt0-ms2.S libgloss/mt/crt0.S libgloss/mt/exit-16-002.c libgloss/mt/exit-16-003.c libgloss/mt/exit-64-001.c libgloss/mt/exit-ms2.c libgloss/mt/exit.c libgloss/mt/fstat.c libgloss/mt/getpid.c libgloss/mt/gettime.c libgloss/mt/isatty.c libgloss/mt/kill.c libgloss/mt/lseek.c libgloss/mt/ms2.ld libgloss/mt/open.c libgloss/mt/read.c libgloss/mt/sbrk.c libgloss/mt/startup-16-002.S libgloss/mt/startup-16-003.S libgloss/mt/startup-64-001.S libgloss/mt/startup-ms2.S libgloss/mt/stat.c libgloss/mt/time.c libgloss/mt/times.c libgloss/mt/trap.S libgloss/mt/trap.h libgloss/mt/unlink.c libgloss/mt/utime.c libgloss/mt/write.c libgloss/open.c libgloss/pa/Makefile.in libgloss/pa/README libgloss/pa/aclocal.m4 libgloss/pa/configure libgloss/pa/configure.in libgloss/pa/crt0.S libgloss/pa/hp-milli.s libgloss/pa/op50n-io.S libgloss/pa/op50n.h libgloss/pa/op50n.ld libgloss/pa/op50nled.c libgloss/pa/setjmp.S libgloss/pa/test.c libgloss/pa/w89k-io.c libgloss/pa/w89k.h libgloss/pa/w89k.ld libgloss/print.c libgloss/putnum.c libgloss/read.c libgloss/rs6000/Makefile.in libgloss/rs6000/aclocal.m4 libgloss/rs6000/ads-exit.S libgloss/rs6000/ads-io.c libgloss/rs6000/ads.ld libgloss/rs6000/configure libgloss/rs6000/configure.in libgloss/rs6000/crt0.S libgloss/rs6000/mbx-exit.c libgloss/rs6000/mbx-inbyte.c libgloss/rs6000/mbx-outbyte.c libgloss/rs6000/mbx-print.c libgloss/rs6000/mbx.ld libgloss/rs6000/mbx.specs libgloss/rs6000/mcount.S libgloss/rs6000/mvme-errno.c libgloss/rs6000/mvme-exit.S libgloss/rs6000/mvme-inbyte.S libgloss/rs6000/mvme-outbyte.S libgloss/rs6000/mvme-print.c libgloss/rs6000/mvme-read.c libgloss/rs6000/sim-abort.c libgloss/rs6000/sim-crt0.S libgloss/rs6000/sim-errno.c libgloss/rs6000/sim-getrusage.S libgloss/rs6000/sim-inbyte.c libgloss/rs6000/sim-print.c libgloss/rs6000/sim-sbrk.c libgloss/rs6000/simulator.S libgloss/rs6000/sol-cfuncs.c libgloss/rs6000/sol-syscall.S libgloss/rs6000/test.c libgloss/rs6000/yellowknife.ld libgloss/sbrk.c libgloss/sh/sh1lcevb.ld libgloss/sh/sh2lcevb.ld libgloss/sh/sh3bb.ld libgloss/sh/sh3lcevb.ld libgloss/sparc/Makefile.in libgloss/sparc/aclocal.m4 libgloss/sparc/asm.h libgloss/sparc/cache.c libgloss/sparc/configure libgloss/sparc/configure.in libgloss/sparc/crt0-701.S libgloss/sparc/crt0.S libgloss/sparc/cygmon-crt0.S libgloss/sparc/cygmon-salib.c libgloss/sparc/cygmon-sparc64-ld.src libgloss/sparc/cygmon.ld.src libgloss/sparc/dtor.C libgloss/sparc/elfsim.ld libgloss/sparc/erc32-crt0.S libgloss/sparc/erc32-io.c libgloss/sparc/erc32-stub.c libgloss/sparc/erc32.ld libgloss/sparc/ex930.ld libgloss/sparc/ex931.ld libgloss/sparc/ex934.ld libgloss/sparc/fixctors.c libgloss/sparc/libsys/Makefile.in libgloss/sparc/libsys/_exit.S libgloss/sparc/libsys/aclocal.m4 libgloss/sparc/libsys/cerror.S libgloss/sparc/libsys/configure libgloss/sparc/libsys/configure.in libgloss/sparc/libsys/isatty.c libgloss/sparc/libsys/libsys-crt0.S libgloss/sparc/libsys/sbrk.S libgloss/sparc/libsys/syscall.h libgloss/sparc/libsys/syscallasm.h libgloss/sparc/libsys/template.S libgloss/sparc/libsys/template_r.S libgloss/sparc/salib-701.c libgloss/sparc/salib.c libgloss/sparc/slite.h libgloss/sparc/sparc-stub.c libgloss/sparc/sparc86x.ld libgloss/sparc/sparcl-stub.c libgloss/sparc/sparclet-stub.c libgloss/sparc/sparclite.h libgloss/sparc/sysc-701.c libgloss/sparc/syscalls.c libgloss/sparc/test.c libgloss/sparc/traps.S libgloss/sparc/tsc701.ld libgloss/spu/Makefile.in libgloss/spu/access.c libgloss/spu/aclocal.m4 libgloss/spu/chdir.c libgloss/spu/chmod.c libgloss/spu/chown.c libgloss/spu/close.c libgloss/spu/configure libgloss/spu/configure.in libgloss/spu/conv_stat.c libgloss/spu/crt0.S libgloss/spu/crti.S libgloss/spu/crtn.S libgloss/spu/dirfuncs.c libgloss/spu/dup.c libgloss/spu/dup2.c libgloss/spu/exit.c libgloss/spu/fchdir.c libgloss/spu/fchmod.c libgloss/spu/fchown.c libgloss/spu/fdatasync.c libgloss/spu/fstat.c libgloss/spu/fsync.c libgloss/spu/ftruncate.c libgloss/spu/getcwd.c libgloss/spu/getpagesize.c libgloss/spu/getpid.c libgloss/spu/gettimeofday.c libgloss/spu/isatty.c libgloss/spu/jsre.h libgloss/spu/kill.c libgloss/spu/lchown.c libgloss/spu/link.c libgloss/spu/linux_syscalls.c libgloss/spu/lockf.c libgloss/spu/lseek.c libgloss/spu/lstat.c libgloss/spu/mkdir.c libgloss/spu/mknod.c libgloss/spu/mkstemp.c libgloss/spu/mktemp.c libgloss/spu/nanosleep.c libgloss/spu/open.c libgloss/spu/pread.c libgloss/spu/pwrite.c libgloss/spu/read.c libgloss/spu/readlink.c libgloss/spu/readv.c libgloss/spu/rmdir.c libgloss/spu/sbrk.c libgloss/spu/sched_yield.c libgloss/spu/shm_open.c libgloss/spu/shm_unlink.c libgloss/spu/stat.c libgloss/spu/symlink.c libgloss/spu/sync.c libgloss/spu/syscalls.c libgloss/spu/truncate.c libgloss/spu/umask.c libgloss/spu/unlink.c libgloss/spu/utime.c libgloss/spu/utimes.c libgloss/spu/write.c libgloss/spu/writev.c libgloss/stat.c libgloss/syscall.h libgloss/testsuite/Makefile.in libgloss/testsuite/config/hppa.mt libgloss/testsuite/config/m68k.mt libgloss/testsuite/config/mips.mt libgloss/testsuite/config/support.c libgloss/testsuite/configure.in libgloss/testsuite/lib/libgloss.exp libgloss/testsuite/libgloss.all/.gdbinit libgloss/testsuite/libgloss.all/Makefile.in libgloss/testsuite/libgloss.all/array.c libgloss/testsuite/libgloss.all/configure.in libgloss/testsuite/libgloss.all/div.c libgloss/testsuite/libgloss.all/double.c libgloss/testsuite/libgloss.all/float.c libgloss/testsuite/libgloss.all/func.c libgloss/testsuite/libgloss.all/io.c libgloss/testsuite/libgloss.all/math.c libgloss/testsuite/libgloss.all/memory.c libgloss/testsuite/libgloss.all/misc.c libgloss/testsuite/libgloss.all/printf.c libgloss/testsuite/libgloss.all/struct.c libgloss/testsuite/libgloss.all/varargs.c libgloss/testsuite/libgloss.all/varargs2.c libgloss/unlink.c libgloss/v850/sys/syscall.h libgloss/wince/Makefile.am libgloss/wince/Makefile.in libgloss/wince/aclocal.m4 libgloss/wince/configure libgloss/wince/configure.in libgloss/write.c libgloss/xstormy16/Makefile.in libgloss/xstormy16/aclocal.m4 libgloss/xstormy16/close.c libgloss/xstormy16/configure libgloss/xstormy16/configure.in libgloss/xstormy16/crt0.s libgloss/xstormy16/crt0_stub.s libgloss/xstormy16/crti.s libgloss/xstormy16/crtn.s libgloss/xstormy16/eva_app.c libgloss/xstormy16/eva_app.ld libgloss/xstormy16/eva_stub.ld libgloss/xstormy16/fstat.c libgloss/xstormy16/getpid.c libgloss/xstormy16/isatty.c libgloss/xstormy16/kill.c libgloss/xstormy16/lseek.c libgloss/xstormy16/open.c libgloss/xstormy16/sim_high.ld libgloss/xstormy16/sim_malloc_start.s libgloss/xstormy16/sim_rom.ld libgloss/xstormy16/stat.c libgloss/xstormy16/syscalls.S libgloss/xstormy16/syscalls.m4 libgloss/xstormy16/unlink.c libgloss/xstormy16/xstormy16_stub.c newlib/ChangeLog newlib/MAINTAINERS newlib/Makefile.am newlib/Makefile.in newlib/Makefile.shared newlib/NEWS newlib/README newlib/acconfig.h newlib/acinclude.m4 newlib/aclocal.m4 newlib/configure newlib/configure.host newlib/configure.in newlib/confsubdir.m4 newlib/doc/Makefile.am newlib/doc/Makefile.in newlib/doc/aclocal.m4 newlib/doc/ansidecl.h newlib/doc/configure newlib/doc/configure.in newlib/doc/doc.str newlib/doc/makedoc.c newlib/iconvdata/EUC-JP.irreversible newlib/iconvdata/Makefile.am newlib/iconvdata/Makefile.in newlib/iconvdata/SJIS.irreversible newlib/iconvdata/aclocal.m4 newlib/iconvdata/configure newlib/iconvdata/configure.in newlib/iconvdata/dummy.c newlib/iconvdata/euc-jp.c newlib/iconvdata/gconv-modules newlib/iconvdata/jis0201.c newlib/iconvdata/jis0201.h newlib/iconvdata/jis0208.c newlib/iconvdata/jis0208.h newlib/iconvdata/jis0212.c newlib/iconvdata/jis0212.h newlib/iconvdata/sjis.c newlib/libc/Makefile.am newlib/libc/Makefile.in newlib/libc/aclocal.m4 newlib/libc/argz/Makefile.am newlib/libc/argz/Makefile.in newlib/libc/argz/argz_add.c newlib/libc/argz/argz_add_sep.c newlib/libc/argz/argz_append.c newlib/libc/argz/argz_count.c newlib/libc/argz/argz_create.c newlib/libc/argz/argz_create_sep.c newlib/libc/argz/argz_delete.c newlib/libc/argz/argz_extract.c newlib/libc/argz/argz_insert.c newlib/libc/argz/argz_next.c newlib/libc/argz/argz_replace.c newlib/libc/argz/argz_stringify.c newlib/libc/argz/buf_findstr.c newlib/libc/argz/buf_findstr.h newlib/libc/argz/dummy.c newlib/libc/argz/envz_add.c newlib/libc/argz/envz_entry.c newlib/libc/argz/envz_get.c newlib/libc/argz/envz_merge.c newlib/libc/argz/envz_remove.c newlib/libc/argz/envz_strip.c newlib/libc/configure newlib/libc/configure.in newlib/libc/ctype/Makefile.am newlib/libc/ctype/Makefile.in newlib/libc/ctype/_tolower.c newlib/libc/ctype/_toupper.c newlib/libc/ctype/ctype.tex newlib/libc/ctype/ctype_.c newlib/libc/ctype/isalnum.c newlib/libc/ctype/isalpha.c newlib/libc/ctype/isascii.c newlib/libc/ctype/isblank.c newlib/libc/ctype/iscntrl.c newlib/libc/ctype/isdigit.c newlib/libc/ctype/islower.c newlib/libc/ctype/isprint.c newlib/libc/ctype/ispunct.c newlib/libc/ctype/isspace.c newlib/libc/ctype/isupper.c newlib/libc/ctype/iswalnum.c newlib/libc/ctype/iswalpha.c newlib/libc/ctype/iswblank.c newlib/libc/ctype/iswcntrl.c newlib/libc/ctype/iswctype.c newlib/libc/ctype/iswdigit.c newlib/libc/ctype/iswgraph.c newlib/libc/ctype/iswlower.c newlib/libc/ctype/iswprint.c newlib/libc/ctype/iswpunct.c newlib/libc/ctype/iswspace.c newlib/libc/ctype/iswupper.c newlib/libc/ctype/iswxdigit.c newlib/libc/ctype/isxdigit.c newlib/libc/ctype/jp2uc.c newlib/libc/ctype/jp2uc.h newlib/libc/ctype/local.h newlib/libc/ctype/toascii.c newlib/libc/ctype/tolower.c newlib/libc/ctype/toupper.c newlib/libc/ctype/towctrans.c newlib/libc/ctype/towlower.c newlib/libc/ctype/towupper.c newlib/libc/ctype/utf8alpha.h newlib/libc/ctype/utf8print.h newlib/libc/ctype/utf8punct.h newlib/libc/ctype/wctrans.c newlib/libc/ctype/wctype.c newlib/libc/errno/Makefile.am newlib/libc/errno/Makefile.in newlib/libc/errno/errno.c newlib/libc/iconv/Makefile.am newlib/libc/iconv/Makefile.in newlib/libc/iconv/ccs/Makefile.am newlib/libc/iconv/ccs/Makefile.in newlib/libc/iconv/ccs/big5.c newlib/libc/iconv/ccs/binary/Makefile.am newlib/libc/iconv/ccs/binary/Makefile.in newlib/libc/iconv/ccs/binary/big5.cct newlib/libc/iconv/ccs/binary/cns11643_plane1.cct newlib/libc/iconv/ccs/binary/cns11643_plane14.cct newlib/libc/iconv/ccs/binary/cns11643_plane2.cct newlib/libc/iconv/ccs/binary/cp775.cct newlib/libc/iconv/ccs/binary/cp850.cct newlib/libc/iconv/ccs/binary/cp852.cct newlib/libc/iconv/ccs/binary/cp855.cct newlib/libc/iconv/ccs/binary/cp866.cct newlib/libc/iconv/ccs/binary/iso_8859_1.cct newlib/libc/iconv/ccs/binary/iso_8859_10.cct newlib/libc/iconv/ccs/binary/iso_8859_11.cct newlib/libc/iconv/ccs/binary/iso_8859_13.cct newlib/libc/iconv/ccs/binary/iso_8859_14.cct newlib/libc/iconv/ccs/binary/iso_8859_15.cct newlib/libc/iconv/ccs/binary/iso_8859_2.cct newlib/libc/iconv/ccs/binary/iso_8859_3.cct newlib/libc/iconv/ccs/binary/iso_8859_4.cct newlib/libc/iconv/ccs/binary/iso_8859_5.cct newlib/libc/iconv/ccs/binary/iso_8859_6.cct newlib/libc/iconv/ccs/binary/iso_8859_7.cct newlib/libc/iconv/ccs/binary/iso_8859_8.cct newlib/libc/iconv/ccs/binary/iso_8859_9.cct newlib/libc/iconv/ccs/binary/iso_ir_111.cct newlib/libc/iconv/ccs/binary/jis_x0201_1976.cct newlib/libc/iconv/ccs/binary/jis_x0208_1990.cct newlib/libc/iconv/ccs/binary/jis_x0212_1990.cct newlib/libc/iconv/ccs/binary/koi8_r.cct newlib/libc/iconv/ccs/binary/koi8_ru.cct newlib/libc/iconv/ccs/binary/koi8_u.cct newlib/libc/iconv/ccs/binary/koi8_uni.cct newlib/libc/iconv/ccs/binary/ksx1001.cct newlib/libc/iconv/ccs/binary/win_1250.cct newlib/libc/iconv/ccs/binary/win_1251.cct newlib/libc/iconv/ccs/binary/win_1252.cct newlib/libc/iconv/ccs/binary/win_1253.cct newlib/libc/iconv/ccs/binary/win_1254.cct newlib/libc/iconv/ccs/binary/win_1255.cct newlib/libc/iconv/ccs/binary/win_1256.cct newlib/libc/iconv/ccs/binary/win_1257.cct newlib/libc/iconv/ccs/binary/win_1258.cct newlib/libc/iconv/ccs/ccs.h newlib/libc/iconv/ccs/ccsbi.c newlib/libc/iconv/ccs/ccsbi.h newlib/libc/iconv/ccs/ccsnames.h newlib/libc/iconv/ccs/cns11643_plane1.c newlib/libc/iconv/ccs/cns11643_plane14.c newlib/libc/iconv/ccs/cns11643_plane2.c newlib/libc/iconv/ccs/cp775.c newlib/libc/iconv/ccs/cp850.c newlib/libc/iconv/ccs/cp852.c newlib/libc/iconv/ccs/cp855.c newlib/libc/iconv/ccs/cp866.c newlib/libc/iconv/ccs/iso_8859_1.c newlib/libc/iconv/ccs/iso_8859_10.c newlib/libc/iconv/ccs/iso_8859_11.c newlib/libc/iconv/ccs/iso_8859_13.c newlib/libc/iconv/ccs/iso_8859_14.c newlib/libc/iconv/ccs/iso_8859_15.c newlib/libc/iconv/ccs/iso_8859_2.c newlib/libc/iconv/ccs/iso_8859_3.c newlib/libc/iconv/ccs/iso_8859_4.c newlib/libc/iconv/ccs/iso_8859_5.c newlib/libc/iconv/ccs/iso_8859_6.c newlib/libc/iconv/ccs/iso_8859_7.c newlib/libc/iconv/ccs/iso_8859_8.c newlib/libc/iconv/ccs/iso_8859_9.c newlib/libc/iconv/ccs/iso_ir_111.c newlib/libc/iconv/ccs/jis_x0201_1976.c newlib/libc/iconv/ccs/jis_x0208_1990.c newlib/libc/iconv/ccs/jis_x0212_1990.c newlib/libc/iconv/ccs/koi8_r.c newlib/libc/iconv/ccs/koi8_ru.c newlib/libc/iconv/ccs/koi8_u.c newlib/libc/iconv/ccs/koi8_uni.c newlib/libc/iconv/ccs/ksx1001.c newlib/libc/iconv/ccs/mktbl.pl newlib/libc/iconv/ccs/win_1250.c newlib/libc/iconv/ccs/win_1251.c newlib/libc/iconv/ccs/win_1252.c newlib/libc/iconv/ccs/win_1253.c newlib/libc/iconv/ccs/win_1254.c newlib/libc/iconv/ccs/win_1255.c newlib/libc/iconv/ccs/win_1256.c newlib/libc/iconv/ccs/win_1257.c newlib/libc/iconv/ccs/win_1258.c newlib/libc/iconv/ces/Makefile.am newlib/libc/iconv/ces/Makefile.in newlib/libc/iconv/ces/cesbi.c newlib/libc/iconv/ces/cesbi.h newlib/libc/iconv/ces/cesdeps.h newlib/libc/iconv/ces/euc.c newlib/libc/iconv/ces/mkdeps.pl newlib/libc/iconv/ces/table-pcs.c newlib/libc/iconv/ces/table.c newlib/libc/iconv/ces/ucs-2-internal.c newlib/libc/iconv/ces/ucs-2.c newlib/libc/iconv/ces/ucs-4-internal.c newlib/libc/iconv/ces/ucs-4.c newlib/libc/iconv/ces/us-ascii.c newlib/libc/iconv/ces/utf-16.c newlib/libc/iconv/ces/utf-8.c newlib/libc/iconv/encoding.aliases newlib/libc/iconv/iconv.tex newlib/libc/iconv/lib/Makefile.am newlib/libc/iconv/lib/Makefile.in newlib/libc/iconv/lib/aliasesbi.c newlib/libc/iconv/lib/aliasesi.c newlib/libc/iconv/lib/conv.h newlib/libc/iconv/lib/encnames.h newlib/libc/iconv/lib/encoding.deps newlib/libc/iconv/lib/endian.h newlib/libc/iconv/lib/iconv.c newlib/libc/iconv/lib/iconvnls.c newlib/libc/iconv/lib/iconvnls.h newlib/libc/iconv/lib/local.h newlib/libc/iconv/lib/nullconv.c newlib/libc/iconv/lib/ucsconv.c newlib/libc/iconv/lib/ucsconv.h newlib/libc/include/_ansi.h newlib/libc/include/_syslist.h newlib/libc/include/alloca.h newlib/libc/include/ar.h newlib/libc/include/argz.h newlib/libc/include/assert.h newlib/libc/include/ctype.h newlib/libc/include/dirent.h newlib/libc/include/envlock.h newlib/libc/include/envz.h newlib/libc/include/errno.h newlib/libc/include/fastmath.h newlib/libc/include/fcntl.h newlib/libc/include/fnmatch.h newlib/libc/include/getopt.h newlib/libc/include/glob.h newlib/libc/include/grp.h newlib/libc/include/iconv.h newlib/libc/include/ieeefp.h newlib/libc/include/inttypes.h newlib/libc/include/langinfo.h newlib/libc/include/libgen.h newlib/libc/include/limits.h newlib/libc/include/locale.h newlib/libc/include/machine/_default_types.h newlib/libc/include/machine/_types.h newlib/libc/include/machine/ansi.h newlib/libc/include/machine/endian.h newlib/libc/include/machine/fastmath.h newlib/libc/include/machine/ieeefp.h newlib/libc/include/machine/malloc.h newlib/libc/include/machine/param.h newlib/libc/include/machine/setjmp-dj.h newlib/libc/include/machine/setjmp.h newlib/libc/include/machine/stdlib.h newlib/libc/include/machine/termios.h newlib/libc/include/machine/time.h newlib/libc/include/machine/types.h newlib/libc/include/malloc.h newlib/libc/include/math.h newlib/libc/include/newlib.h newlib/libc/include/paths.h newlib/libc/include/process.h newlib/libc/include/pthread.h newlib/libc/include/pwd.h newlib/libc/include/reent.h newlib/libc/include/regdef.h newlib/libc/include/regex.h newlib/libc/include/sched.h newlib/libc/include/search.h newlib/libc/include/setjmp.h newlib/libc/include/signal.h newlib/libc/include/stdint.h newlib/libc/include/stdio.h newlib/libc/include/stdlib.h newlib/libc/include/string.h newlib/libc/include/sys/_default_fcntl.h newlib/libc/include/sys/_types.h newlib/libc/include/sys/cdefs.h newlib/libc/include/sys/config.h newlib/libc/include/sys/custom_file.h newlib/libc/include/sys/dirent.h newlib/libc/include/sys/errno.h newlib/libc/include/sys/fcntl.h newlib/libc/include/sys/features.h newlib/libc/include/sys/file.h newlib/libc/include/sys/iconvnls.h newlib/libc/include/sys/lock.h newlib/libc/include/sys/param.h newlib/libc/include/sys/queue.h newlib/libc/include/sys/reent.h newlib/libc/include/sys/resource.h newlib/libc/include/sys/sched.h newlib/libc/include/sys/signal.h newlib/libc/include/sys/stat.h newlib/libc/include/sys/stdio.h newlib/libc/include/sys/string.h newlib/libc/include/sys/syslimits.h newlib/libc/include/sys/time.h newlib/libc/include/sys/timeb.h newlib/libc/include/sys/times.h newlib/libc/include/sys/types.h newlib/libc/include/sys/unistd.h newlib/libc/include/sys/utime.h newlib/libc/include/sys/wait.h newlib/libc/include/tar.h newlib/libc/include/termios.h newlib/libc/include/time.h newlib/libc/include/unctrl.h newlib/libc/include/unistd.h newlib/libc/include/utime.h newlib/libc/include/utmp.h newlib/libc/include/wchar.h newlib/libc/include/wctype.h newlib/libc/include/wordexp.h newlib/libc/libc.texinfo newlib/libc/locale/Makefile.am newlib/libc/locale/Makefile.in newlib/libc/locale/fix_grouping.c newlib/libc/locale/ldpart.c newlib/libc/locale/ldpart.h newlib/libc/locale/lmessages.c newlib/libc/locale/lmessages.h newlib/libc/locale/lmonetary.c newlib/libc/locale/lmonetary.h newlib/libc/locale/lnumeric.c newlib/libc/locale/lnumeric.h newlib/libc/locale/locale.c newlib/libc/locale/locale.tex newlib/libc/locale/nl_langinfo.3 newlib/libc/locale/nl_langinfo.c newlib/libc/locale/setlocale.h newlib/libc/locale/timelocal.c newlib/libc/locale/timelocal.h newlib/libc/machine/Makefile.am newlib/libc/machine/Makefile.in newlib/libc/machine/a29k/Makefile.am newlib/libc/machine/a29k/Makefile.in newlib/libc/machine/a29k/aclocal.m4 newlib/libc/machine/a29k/configure newlib/libc/machine/a29k/configure.in newlib/libc/machine/aclocal.m4 newlib/libc/machine/arm/Makefile.am newlib/libc/machine/arm/Makefile.in newlib/libc/machine/arm/access.c newlib/libc/machine/arm/aclocal.m4 newlib/libc/machine/arm/configure newlib/libc/machine/arm/configure.in newlib/libc/machine/arm/machine/endian.h newlib/libc/machine/arm/machine/param.h newlib/libc/machine/arm/setjmp.S newlib/libc/machine/bfin/Makefile.am newlib/libc/machine/bfin/Makefile.in newlib/libc/machine/bfin/aclocal.m4 newlib/libc/machine/bfin/configure newlib/libc/machine/bfin/configure.in newlib/libc/machine/bfin/longjmp.S newlib/libc/machine/bfin/setjmp.S newlib/libc/machine/configure newlib/libc/machine/configure.in newlib/libc/machine/cris/Makefile.am newlib/libc/machine/cris/Makefile.in newlib/libc/machine/cris/aclocal.m4 newlib/libc/machine/cris/configure newlib/libc/machine/cris/configure.in newlib/libc/machine/cris/include/pthread.h newlib/libc/machine/cris/libcdtor.c newlib/libc/machine/cris/memcpy.c newlib/libc/machine/cris/memmove.c newlib/libc/machine/cris/memset.c newlib/libc/machine/cris/setjmp.c newlib/libc/machine/cris/sys/errno.h newlib/libc/machine/cris/sys/fcntl.h newlib/libc/machine/cris/sys/signal.h newlib/libc/machine/crx/Makefile.am newlib/libc/machine/crx/Makefile.in newlib/libc/machine/crx/aclocal.m4 newlib/libc/machine/crx/configure newlib/libc/machine/crx/configure.in newlib/libc/machine/crx/getenv.c newlib/libc/machine/crx/setjmp.S newlib/libc/machine/crx/sys/asm.h newlib/libc/machine/crx/sys/libh.h newlib/libc/machine/crx/sys/syscall.h newlib/libc/machine/d10v/Makefile.am newlib/libc/machine/d10v/Makefile.in newlib/libc/machine/d10v/aclocal.m4 newlib/libc/machine/d10v/configure newlib/libc/machine/d10v/configure.in newlib/libc/machine/d10v/setjmp.S newlib/libc/machine/d30v/Makefile.am newlib/libc/machine/d30v/Makefile.in newlib/libc/machine/d30v/aclocal.m4 newlib/libc/machine/d30v/configure newlib/libc/machine/d30v/configure.in newlib/libc/machine/d30v/setjmp.S newlib/libc/machine/fr30/Makefile.am newlib/libc/machine/fr30/Makefile.in newlib/libc/machine/fr30/aclocal.m4 newlib/libc/machine/fr30/configure newlib/libc/machine/fr30/configure.in newlib/libc/machine/fr30/setjmp.S newlib/libc/machine/frv/Makefile.am newlib/libc/machine/frv/Makefile.in newlib/libc/machine/frv/aclocal.m4 newlib/libc/machine/frv/configure newlib/libc/machine/frv/configure.in newlib/libc/machine/frv/setjmp.S newlib/libc/machine/h8300/Makefile.am newlib/libc/machine/h8300/Makefile.in newlib/libc/machine/h8300/aclocal.m4 newlib/libc/machine/h8300/configure newlib/libc/machine/h8300/configure.in newlib/libc/machine/h8300/defines.h newlib/libc/machine/h8300/h8sx_strcpy.S newlib/libc/machine/h8300/memcpy.S newlib/libc/machine/h8300/memset.S newlib/libc/machine/h8300/reg_memcpy.S newlib/libc/machine/h8300/reg_memset.S newlib/libc/machine/h8300/setarch.h newlib/libc/machine/h8300/setjmp.S newlib/libc/machine/h8300/strcmp.S newlib/libc/machine/h8500/Makefile.am newlib/libc/machine/h8500/Makefile.in newlib/libc/machine/h8500/aclocal.m4 newlib/libc/machine/h8500/cmpsi.c newlib/libc/machine/h8500/configure newlib/libc/machine/h8500/configure.in newlib/libc/machine/h8500/divhi3.S newlib/libc/machine/h8500/divsi3.c newlib/libc/machine/h8500/mulhi3.c newlib/libc/machine/h8500/mulsi3.c newlib/libc/machine/h8500/negsi2.c newlib/libc/machine/h8500/psi.S newlib/libc/machine/h8500/setjmp.S newlib/libc/machine/h8500/shifts.c newlib/libc/machine/hppa/DEFS.h newlib/libc/machine/hppa/Makefile.am newlib/libc/machine/hppa/Makefile.in newlib/libc/machine/hppa/aclocal.m4 newlib/libc/machine/hppa/configure newlib/libc/machine/hppa/configure.in newlib/libc/machine/hppa/memchr.S newlib/libc/machine/hppa/memcmp.S newlib/libc/machine/hppa/memcpy.S newlib/libc/machine/hppa/memset.S newlib/libc/machine/hppa/pcc_prefix.s newlib/libc/machine/hppa/setjmp.S newlib/libc/machine/hppa/strcat.S newlib/libc/machine/hppa/strcmp.S newlib/libc/machine/hppa/strcpy.S newlib/libc/machine/hppa/strlen.S newlib/libc/machine/hppa/strncat.S newlib/libc/machine/hppa/strncmp.S newlib/libc/machine/hppa/strncpy.S newlib/libc/machine/i386/Makefile.am newlib/libc/machine/i386/Makefile.in newlib/libc/machine/i386/aclocal.m4 newlib/libc/machine/i386/configure newlib/libc/machine/i386/configure.in newlib/libc/machine/i386/f_atan2.S newlib/libc/machine/i386/f_atan2f.S newlib/libc/machine/i386/f_exp.c newlib/libc/machine/i386/f_expf.c newlib/libc/machine/i386/f_frexp.S newlib/libc/machine/i386/f_frexpf.S newlib/libc/machine/i386/f_ldexp.S newlib/libc/machine/i386/f_ldexpf.S newlib/libc/machine/i386/f_log.S newlib/libc/machine/i386/f_log10.S newlib/libc/machine/i386/f_log10f.S newlib/libc/machine/i386/f_logf.S newlib/libc/machine/i386/f_math.h newlib/libc/machine/i386/f_pow.c newlib/libc/machine/i386/f_powf.c newlib/libc/machine/i386/f_tan.S newlib/libc/machine/i386/f_tanf.S newlib/libc/machine/i386/i386mach.h newlib/libc/machine/i386/machine/fastmath.h newlib/libc/machine/i386/memchr.S newlib/libc/machine/i386/memcmp.S newlib/libc/machine/i386/memcpy.S newlib/libc/machine/i386/memmove.S newlib/libc/machine/i386/memset.S newlib/libc/machine/i386/setjmp.S newlib/libc/machine/i386/strchr.S newlib/libc/machine/i386/strlen.S newlib/libc/machine/i960/Makefile.am newlib/libc/machine/i960/Makefile.in newlib/libc/machine/i960/aclocal.m4 newlib/libc/machine/i960/configure newlib/libc/machine/i960/configure.in newlib/libc/machine/i960/memccpy.S newlib/libc/machine/i960/memccpy_ca.S newlib/libc/machine/i960/memchr.S newlib/libc/machine/i960/memchr_ca.S newlib/libc/machine/i960/memcmp.S newlib/libc/machine/i960/memcmp_ca.S newlib/libc/machine/i960/memcpy.S newlib/libc/machine/i960/memcpy_ca.S newlib/libc/machine/i960/memset.S newlib/libc/machine/i960/setjmp.S newlib/libc/machine/i960/strchr.S newlib/libc/machine/i960/strchr_ca.S newlib/libc/machine/i960/strcmp.S newlib/libc/machine/i960/strcmp_ca.S newlib/libc/machine/i960/strcpy.S newlib/libc/machine/i960/strcpy_ca.S newlib/libc/machine/i960/strcspn.S newlib/libc/machine/i960/strdup.S newlib/libc/machine/i960/strlen.S newlib/libc/machine/i960/strlen_ca.S newlib/libc/machine/i960/strncat.S newlib/libc/machine/i960/strncat_ca.S newlib/libc/machine/i960/strncmp.S newlib/libc/machine/i960/strncmp_ca.S newlib/libc/machine/i960/strncpy.S newlib/libc/machine/i960/strncpy_ca.S newlib/libc/machine/i960/strpbrk.S newlib/libc/machine/i960/strrchr.S newlib/libc/machine/iq2000/Makefile.am newlib/libc/machine/iq2000/Makefile.in newlib/libc/machine/iq2000/aclocal.m4 newlib/libc/machine/iq2000/configure newlib/libc/machine/iq2000/configure.in newlib/libc/machine/iq2000/setjmp.S newlib/libc/machine/m32c/Makefile.am newlib/libc/machine/m32c/Makefile.in newlib/libc/machine/m32c/aclocal.m4 newlib/libc/machine/m32c/configure newlib/libc/machine/m32c/configure.in newlib/libc/machine/m32c/setjmp.S newlib/libc/machine/m32r/Makefile.am newlib/libc/machine/m32r/Makefile.in newlib/libc/machine/m32r/aclocal.m4 newlib/libc/machine/m32r/configure newlib/libc/machine/m32r/configure.in newlib/libc/machine/m32r/setjmp.S newlib/libc/machine/m68hc11/Makefile.am newlib/libc/machine/m68hc11/Makefile.in newlib/libc/machine/m68hc11/aclocal.m4 newlib/libc/machine/m68hc11/configure newlib/libc/machine/m68hc11/configure.in newlib/libc/machine/m68hc11/setjmp.S newlib/libc/machine/m68k/Makefile.am newlib/libc/machine/m68k/Makefile.in newlib/libc/machine/m68k/aclocal.m4 newlib/libc/machine/m68k/configure newlib/libc/machine/m68k/configure.in newlib/libc/machine/m68k/m68kasm.h newlib/libc/machine/m68k/memcpy.S newlib/libc/machine/m68k/memset.S newlib/libc/machine/m68k/setjmp.S newlib/libc/machine/m68k/strcpy.c newlib/libc/machine/m68k/strlen.c newlib/libc/machine/m88k/Makefile.am newlib/libc/machine/m88k/Makefile.in newlib/libc/machine/m88k/aclocal.m4 newlib/libc/machine/m88k/configure newlib/libc/machine/m88k/configure.in newlib/libc/machine/m88k/setjmp.S newlib/libc/machine/mep/Makefile.am newlib/libc/machine/mep/Makefile.in newlib/libc/machine/mep/aclocal.m4 newlib/libc/machine/mep/configure newlib/libc/machine/mep/configure.in newlib/libc/machine/mep/setjmp.S newlib/libc/machine/mips/Makefile.am newlib/libc/machine/mips/Makefile.in newlib/libc/machine/mips/aclocal.m4 newlib/libc/machine/mips/configure newlib/libc/machine/mips/configure.in newlib/libc/machine/mips/machine/regdef.h newlib/libc/machine/mips/memcpy.c newlib/libc/machine/mips/memset.c newlib/libc/machine/mips/setjmp.S newlib/libc/machine/mips/strcmp.c newlib/libc/machine/mips/strlen.c newlib/libc/machine/mips/strncpy.c newlib/libc/machine/mn10200/Makefile.am newlib/libc/machine/mn10200/Makefile.in newlib/libc/machine/mn10200/aclocal.m4 newlib/libc/machine/mn10200/configure newlib/libc/machine/mn10200/configure.in newlib/libc/machine/mn10200/setjmp.S newlib/libc/machine/mn10300/Makefile.am newlib/libc/machine/mn10300/Makefile.in newlib/libc/machine/mn10300/aclocal.m4 newlib/libc/machine/mn10300/configure newlib/libc/machine/mn10300/configure.in newlib/libc/machine/mn10300/memchr.S newlib/libc/machine/mn10300/memcmp.S newlib/libc/machine/mn10300/memcpy.S newlib/libc/machine/mn10300/memset.S newlib/libc/machine/mn10300/setjmp.S newlib/libc/machine/mn10300/strchr.S newlib/libc/machine/mn10300/strcmp.S newlib/libc/machine/mn10300/strcpy.S newlib/libc/machine/mn10300/strlen.S newlib/libc/machine/mt/Makefile.am newlib/libc/machine/mt/Makefile.in newlib/libc/machine/mt/aclocal.m4 newlib/libc/machine/mt/configure newlib/libc/machine/mt/configure.in newlib/libc/machine/mt/setjmp.S newlib/libc/machine/necv70/Makefile.am newlib/libc/machine/necv70/Makefile.in newlib/libc/machine/necv70/aclocal.m4 newlib/libc/machine/necv70/configure newlib/libc/machine/necv70/configure.in newlib/libc/machine/necv70/fastmath.S newlib/libc/machine/necv70/machine/registers.h newlib/libc/machine/necv70/necv70.tex newlib/libc/machine/necv70/setjmp.S newlib/libc/machine/powerpc/Makefile.am newlib/libc/machine/powerpc/Makefile.in newlib/libc/machine/powerpc/aclocal.m4 newlib/libc/machine/powerpc/atosfix16.c newlib/libc/machine/powerpc/atosfix32.c newlib/libc/machine/powerpc/atosfix64.c newlib/libc/machine/powerpc/atoufix16.c newlib/libc/machine/powerpc/atoufix32.c newlib/libc/machine/powerpc/atoufix64.c newlib/libc/machine/powerpc/configure newlib/libc/machine/powerpc/configure.in newlib/libc/machine/powerpc/fix64.h newlib/libc/machine/powerpc/machine/malloc.h newlib/libc/machine/powerpc/machine/stdlib.h newlib/libc/machine/powerpc/setjmp.S newlib/libc/machine/powerpc/simdldtoa.c newlib/libc/machine/powerpc/strtosfix16.c newlib/libc/machine/powerpc/strtosfix32.c newlib/libc/machine/powerpc/strtosfix64.c newlib/libc/machine/powerpc/strtoufix16.c newlib/libc/machine/powerpc/strtoufix32.c newlib/libc/machine/powerpc/strtoufix64.c newlib/libc/machine/powerpc/times.c newlib/libc/machine/powerpc/ufix64toa.c newlib/libc/machine/powerpc/vec_calloc.c newlib/libc/machine/powerpc/vec_free.c newlib/libc/machine/powerpc/vec_malloc.c newlib/libc/machine/powerpc/vec_mallocr.c newlib/libc/machine/powerpc/vec_realloc.c newlib/libc/machine/powerpc/vfprintf.c newlib/libc/machine/powerpc/vfscanf.c newlib/libc/machine/sh/Makefile.am newlib/libc/machine/sh/Makefile.in newlib/libc/machine/sh/aclocal.m4 newlib/libc/machine/sh/asm.h newlib/libc/machine/sh/configure newlib/libc/machine/sh/configure.in newlib/libc/machine/sh/memcpy.S newlib/libc/machine/sh/memset.S newlib/libc/machine/sh/setjmp.S newlib/libc/machine/sh/strcmp.S newlib/libc/machine/sh/strcpy.S newlib/libc/machine/sh/strlen.S newlib/libc/machine/sh/strncpy.S newlib/libc/machine/sparc/Makefile.am newlib/libc/machine/sparc/Makefile.in newlib/libc/machine/sparc/aclocal.m4 newlib/libc/machine/sparc/configure newlib/libc/machine/sparc/configure.in newlib/libc/machine/sparc/machine/sparclet.h newlib/libc/machine/sparc/scan.c newlib/libc/machine/sparc/setjmp.S newlib/libc/machine/sparc/shuffle.c newlib/libc/machine/spu/Makefile.am newlib/libc/machine/spu/Makefile.in newlib/libc/machine/spu/aclocal.m4 newlib/libc/machine/spu/assert.c newlib/libc/machine/spu/c99ppe.h newlib/libc/machine/spu/clearerr.c newlib/libc/machine/spu/configure newlib/libc/machine/spu/configure.in newlib/libc/machine/spu/creat.c newlib/libc/machine/spu/fclose.c newlib/libc/machine/spu/feof.c newlib/libc/machine/spu/ferror.c newlib/libc/machine/spu/fflush.c newlib/libc/machine/spu/fgetc.c newlib/libc/machine/spu/fgetpos.c newlib/libc/machine/spu/fgets.c newlib/libc/machine/spu/fileno.c newlib/libc/machine/spu/fiprintf.S newlib/libc/machine/spu/fiscanf.S newlib/libc/machine/spu/fopen.c newlib/libc/machine/spu/fprintf.S newlib/libc/machine/spu/fputc.c newlib/libc/machine/spu/fputs.c newlib/libc/machine/spu/fread.c newlib/libc/machine/spu/freopen.c newlib/libc/machine/spu/fscanf.S newlib/libc/machine/spu/fseek.c newlib/libc/machine/spu/fsetpos.c newlib/libc/machine/spu/ftell.c newlib/libc/machine/spu/fwrite.c newlib/libc/machine/spu/getc.c newlib/libc/machine/spu/getchar.c newlib/libc/machine/spu/gets.c newlib/libc/machine/spu/impure.c newlib/libc/machine/spu/include/fenv.h newlib/libc/machine/spu/include/spu_timer.h newlib/libc/machine/spu/iprintf.S newlib/libc/machine/spu/iscanf.S newlib/libc/machine/spu/machine/_types.h newlib/libc/machine/spu/memcmp.c newlib/libc/machine/spu/memcpy.c newlib/libc/machine/spu/memmove.c newlib/libc/machine/spu/memset.c newlib/libc/machine/spu/mk_syscalls newlib/libc/machine/spu/perror.c newlib/libc/machine/spu/printf.S newlib/libc/machine/spu/putc.c newlib/libc/machine/spu/putchar.c newlib/libc/machine/spu/puts.c newlib/libc/machine/spu/remove.c newlib/libc/machine/spu/rename.c newlib/libc/machine/spu/rewind.c newlib/libc/machine/spu/scanf.S newlib/libc/machine/spu/setbuf.c newlib/libc/machine/spu/setjmp.S newlib/libc/machine/spu/setvbuf.c newlib/libc/machine/spu/siprintf.S newlib/libc/machine/spu/siscanf.S newlib/libc/machine/spu/sleep.c newlib/libc/machine/spu/sniprintf.S newlib/libc/machine/spu/snprintf.S newlib/libc/machine/spu/sprintf.S newlib/libc/machine/spu/spu_clock_stop.c newlib/libc/machine/spu/spu_clock_svcs.c newlib/libc/machine/spu/spu_timebase.c newlib/libc/machine/spu/spu_timer_flih.S newlib/libc/machine/spu/spu_timer_free.c newlib/libc/machine/spu/spu_timer_internal.h newlib/libc/machine/spu/spu_timer_slih.c newlib/libc/machine/spu/spu_timer_slih_reg.c newlib/libc/machine/spu/spu_timer_stop.c newlib/libc/machine/spu/spu_timer_svcs.c newlib/libc/machine/spu/sscanf.S newlib/libc/machine/spu/stack_reg_va.S newlib/libc/machine/spu/stdio.c newlib/libc/machine/spu/straddr.h newlib/libc/machine/spu/strcat.c newlib/libc/machine/spu/strchr.c newlib/libc/machine/spu/strcmp.c newlib/libc/machine/spu/strcpy.c newlib/libc/machine/spu/strcpy.h newlib/libc/machine/spu/strcspn.c newlib/libc/machine/spu/strlen.c newlib/libc/machine/spu/strncat.c newlib/libc/machine/spu/strncmp.c newlib/libc/machine/spu/strncmp.h newlib/libc/machine/spu/strncpy.c newlib/libc/machine/spu/strpbrk.c newlib/libc/machine/spu/strrchr.c newlib/libc/machine/spu/strspn.c newlib/libc/machine/spu/strxfrm.c newlib/libc/machine/spu/sys/custom_file.h newlib/libc/machine/spu/sys/dirent.h newlib/libc/machine/spu/sys/errno.h newlib/libc/machine/spu/sys/fenv.h newlib/libc/machine/spu/sys/linux_syscalls.h newlib/libc/machine/spu/sys/sched.h newlib/libc/machine/spu/sys/syscall.h newlib/libc/machine/spu/sys/uio.h newlib/libc/machine/spu/sys/utime.h newlib/libc/machine/spu/syscall.def newlib/libc/machine/spu/tmpfile.c newlib/libc/machine/spu/tmpnam.c newlib/libc/machine/spu/ungetc.c newlib/libc/machine/spu/usleep.c newlib/libc/machine/spu/vec_literal.h newlib/libc/machine/spu/vfiprintf.c newlib/libc/machine/spu/vfiscanf.c newlib/libc/machine/spu/vfprintf.c newlib/libc/machine/spu/vfscanf.c newlib/libc/machine/spu/viprintf.c newlib/libc/machine/spu/viscanf.c newlib/libc/machine/spu/vprintf.c newlib/libc/machine/spu/vscanf.c newlib/libc/machine/spu/vsiprintf.c newlib/libc/machine/spu/vsiscanf.c newlib/libc/machine/spu/vsniprintf.c newlib/libc/machine/spu/vsnprintf.c newlib/libc/machine/spu/vsprintf.c newlib/libc/machine/spu/vsscanf.c newlib/libc/machine/tic4x/Makefile.am newlib/libc/machine/tic4x/Makefile.in newlib/libc/machine/tic4x/aclocal.m4 newlib/libc/machine/tic4x/configure newlib/libc/machine/tic4x/configure.in newlib/libc/machine/tic4x/setjmp.S newlib/libc/machine/tic80/Makefile.am newlib/libc/machine/tic80/Makefile.in newlib/libc/machine/tic80/aclocal.m4 newlib/libc/machine/tic80/configure newlib/libc/machine/tic80/configure.in newlib/libc/machine/tic80/setjmp.S newlib/libc/machine/v850/Makefile.am newlib/libc/machine/v850/Makefile.in newlib/libc/machine/v850/aclocal.m4 newlib/libc/machine/v850/configure newlib/libc/machine/v850/configure.in newlib/libc/machine/v850/setjmp.S newlib/libc/machine/w65/Makefile.am newlib/libc/machine/w65/Makefile.in newlib/libc/machine/w65/aclocal.m4 newlib/libc/machine/w65/cmpsi.c newlib/libc/machine/w65/configure newlib/libc/machine/w65/configure.in newlib/libc/machine/w65/divsi3.c newlib/libc/machine/w65/lshrhi.S newlib/libc/machine/w65/mulsi3.c newlib/libc/machine/w65/sdivhi3.S newlib/libc/machine/w65/smulhi3.S newlib/libc/machine/w65/udivhi3.S newlib/libc/machine/w65/umodhi3.S newlib/libc/machine/x86_64/Makefile.am newlib/libc/machine/x86_64/Makefile.in newlib/libc/machine/x86_64/aclocal.m4 newlib/libc/machine/x86_64/configure newlib/libc/machine/x86_64/configure.in newlib/libc/machine/x86_64/memcpy.S newlib/libc/machine/x86_64/memset.S newlib/libc/machine/x86_64/setjmp.S newlib/libc/machine/x86_64/x86_64mach.h newlib/libc/machine/xscale/Makefile.am newlib/libc/machine/xscale/Makefile.in newlib/libc/machine/xscale/aclocal.m4 newlib/libc/machine/xscale/configure newlib/libc/machine/xscale/configure.in newlib/libc/machine/xscale/machine/profile.h newlib/libc/machine/xscale/memchr.c newlib/libc/machine/xscale/memcmp.c newlib/libc/machine/xscale/memcpy.c newlib/libc/machine/xscale/memmove.c newlib/libc/machine/xscale/memset.c newlib/libc/machine/xscale/setjmp.S newlib/libc/machine/xscale/strchr.c newlib/libc/machine/xscale/strcmp.c newlib/libc/machine/xscale/strcpy.c newlib/libc/machine/xscale/strlen.c newlib/libc/machine/xscale/xscale.h newlib/libc/machine/xstormy16/Makefile.am newlib/libc/machine/xstormy16/Makefile.in newlib/libc/machine/xstormy16/aclocal.m4 newlib/libc/machine/xstormy16/configure newlib/libc/machine/xstormy16/configure.in newlib/libc/machine/xstormy16/mallocr.c newlib/libc/machine/xstormy16/setjmp.S newlib/libc/machine/xstormy16/tiny-malloc.c newlib/libc/machine/z8k/Makefile.am newlib/libc/machine/z8k/Makefile.in newlib/libc/machine/z8k/aclocal.m4 newlib/libc/machine/z8k/args.h newlib/libc/machine/z8k/configure newlib/libc/machine/z8k/configure.in newlib/libc/machine/z8k/memcmp.S newlib/libc/machine/z8k/memcpy.S newlib/libc/machine/z8k/memmove.S newlib/libc/machine/z8k/memset.S newlib/libc/machine/z8k/setjmp.S newlib/libc/misc/Makefile.am newlib/libc/misc/Makefile.in newlib/libc/misc/__dprintf.c newlib/libc/misc/ffs.c newlib/libc/misc/init.c newlib/libc/misc/misc.tex newlib/libc/misc/unctrl.c newlib/libc/posix/COPYRIGHT newlib/libc/posix/Makefile.am newlib/libc/posix/Makefile.in newlib/libc/posix/_isatty.c newlib/libc/posix/cclass.h newlib/libc/posix/closedir.c newlib/libc/posix/cname.h newlib/libc/posix/collate.c newlib/libc/posix/collate.h newlib/libc/posix/collcmp.c newlib/libc/posix/creat.c newlib/libc/posix/engine.c newlib/libc/posix/execl.c newlib/libc/posix/execle.c newlib/libc/posix/execlp.c newlib/libc/posix/execv.c newlib/libc/posix/execve.c newlib/libc/posix/execvp.c newlib/libc/posix/fnmatch.3 newlib/libc/posix/fnmatch.c newlib/libc/posix/glob.3 newlib/libc/posix/glob.c newlib/libc/posix/isatty.c newlib/libc/posix/namespace.h newlib/libc/posix/opendir.c newlib/libc/posix/popen.c newlib/libc/posix/readdir.c newlib/libc/posix/readdir_r.c newlib/libc/posix/reallocf.c newlib/libc/posix/regcomp.c newlib/libc/posix/regerror.c newlib/libc/posix/regex.3 newlib/libc/posix/regex2.h newlib/libc/posix/regexec.c newlib/libc/posix/regfree.c newlib/libc/posix/rewinddir.c newlib/libc/posix/rune.h newlib/libc/posix/runetype.h newlib/libc/posix/scandir.c newlib/libc/posix/seekdir.c newlib/libc/posix/sleep.c newlib/libc/posix/sysexits.h newlib/libc/posix/telldir.c newlib/libc/posix/un-namespace.h newlib/libc/posix/usleep.c newlib/libc/posix/utils.h newlib/libc/posix/wordexp.c newlib/libc/posix/wordfree.c newlib/libc/reent/Makefile.am newlib/libc/reent/Makefile.in newlib/libc/reent/closer.c newlib/libc/reent/execr.c newlib/libc/reent/fcntlr.c newlib/libc/reent/fstat64r.c newlib/libc/reent/fstatr.c newlib/libc/reent/getreent.c newlib/libc/reent/gettimeofdayr.c newlib/libc/reent/impure.c newlib/libc/reent/isattyr.c newlib/libc/reent/linkr.c newlib/libc/reent/lseek64r.c newlib/libc/reent/lseekr.c newlib/libc/reent/open64r.c newlib/libc/reent/openr.c newlib/libc/reent/readr.c newlib/libc/reent/reent.c newlib/libc/reent/reent.tex newlib/libc/reent/renamer.c newlib/libc/reent/sbrkr.c newlib/libc/reent/signalr.c newlib/libc/reent/signgam.c newlib/libc/reent/statr.c newlib/libc/reent/timesr.c newlib/libc/reent/unlinkr.c newlib/libc/reent/writer.c newlib/libc/saber newlib/libc/search/Makefile.am newlib/libc/search/Makefile.in newlib/libc/search/bsearch.c newlib/libc/search/db_local.h newlib/libc/search/extern.h newlib/libc/search/hash.c newlib/libc/search/hash.h newlib/libc/search/hash_bigkey.c newlib/libc/search/hash_buf.c newlib/libc/search/hash_func.c newlib/libc/search/hash_log2.c newlib/libc/search/hash_page.c newlib/libc/search/hcreate.3 newlib/libc/search/hcreate.c newlib/libc/search/hcreate_r.c newlib/libc/search/page.h newlib/libc/search/qsort.c newlib/libc/search/tdelete.c newlib/libc/search/tdestroy.c newlib/libc/search/tfind.c newlib/libc/search/tsearch.3 newlib/libc/search/tsearch.c newlib/libc/search/twalk.c newlib/libc/signal/Makefile.am newlib/libc/signal/Makefile.in newlib/libc/signal/raise.c newlib/libc/signal/signal.c newlib/libc/signal/signal.tex newlib/libc/stdio/Makefile.am newlib/libc/stdio/Makefile.in newlib/libc/stdio/asiprintf.c newlib/libc/stdio/asniprintf.c newlib/libc/stdio/asnprintf.c newlib/libc/stdio/asprintf.c newlib/libc/stdio/clearerr.c newlib/libc/stdio/diprintf.c newlib/libc/stdio/dprintf.c newlib/libc/stdio/fclose.c newlib/libc/stdio/fcloseall.c newlib/libc/stdio/fdopen.c newlib/libc/stdio/feof.c newlib/libc/stdio/ferror.c newlib/libc/stdio/fflush.c newlib/libc/stdio/fgetc.c newlib/libc/stdio/fgetpos.c newlib/libc/stdio/fgets.c newlib/libc/stdio/fileno.c newlib/libc/stdio/findfp.c newlib/libc/stdio/fiprintf.c newlib/libc/stdio/fiscanf.c newlib/libc/stdio/flags.c newlib/libc/stdio/floatio.h newlib/libc/stdio/fmemopen.c newlib/libc/stdio/fopen.c newlib/libc/stdio/fopencookie.c newlib/libc/stdio/fprintf.c newlib/libc/stdio/fputc.c newlib/libc/stdio/fputs.c newlib/libc/stdio/fread.c newlib/libc/stdio/freopen.c newlib/libc/stdio/fscanf.c newlib/libc/stdio/fseek.c newlib/libc/stdio/fseeko.c newlib/libc/stdio/fsetpos.c newlib/libc/stdio/ftell.c newlib/libc/stdio/ftello.c newlib/libc/stdio/funopen.c newlib/libc/stdio/fvwrite.c newlib/libc/stdio/fvwrite.h newlib/libc/stdio/fwalk.c newlib/libc/stdio/fwrite.c newlib/libc/stdio/getc.c newlib/libc/stdio/getc_u.c newlib/libc/stdio/getchar.c newlib/libc/stdio/getchar_u.c newlib/libc/stdio/getdelim.c newlib/libc/stdio/getline.c newlib/libc/stdio/gets.c newlib/libc/stdio/getw.c newlib/libc/stdio/iprintf.c newlib/libc/stdio/iscanf.c newlib/libc/stdio/local.h newlib/libc/stdio/makebuf.c newlib/libc/stdio/mktemp.c newlib/libc/stdio/open_memstream.c newlib/libc/stdio/perror.c newlib/libc/stdio/printf.c newlib/libc/stdio/putc.c newlib/libc/stdio/putc_u.c newlib/libc/stdio/putchar.c newlib/libc/stdio/putchar_u.c newlib/libc/stdio/puts.c newlib/libc/stdio/putw.c newlib/libc/stdio/refill.c newlib/libc/stdio/remove.c newlib/libc/stdio/rename.c newlib/libc/stdio/rewind.c newlib/libc/stdio/rget.c newlib/libc/stdio/scanf.c newlib/libc/stdio/sccl.c newlib/libc/stdio/setbuf.c newlib/libc/stdio/setbuffer.c newlib/libc/stdio/setlinebuf.c newlib/libc/stdio/setvbuf.c newlib/libc/stdio/siprintf.c newlib/libc/stdio/siscanf.c newlib/libc/stdio/sniprintf.c newlib/libc/stdio/snprintf.c newlib/libc/stdio/sprintf.c newlib/libc/stdio/sscanf.c newlib/libc/stdio/stdio.c newlib/libc/stdio/stdio.tex newlib/libc/stdio/tmpfile.c newlib/libc/stdio/tmpnam.c newlib/libc/stdio/ungetc.c newlib/libc/stdio/vasiprintf.c newlib/libc/stdio/vasniprintf.c newlib/libc/stdio/vasnprintf.c newlib/libc/stdio/vasprintf.c newlib/libc/stdio/vdiprintf.c newlib/libc/stdio/vdprintf.c newlib/libc/stdio/vfieeefp.h newlib/libc/stdio/vfprintf.c newlib/libc/stdio/vfscanf.c newlib/libc/stdio/viprintf.c newlib/libc/stdio/viscanf.c newlib/libc/stdio/vprintf.c newlib/libc/stdio/vscanf.c newlib/libc/stdio/vsiprintf.c newlib/libc/stdio/vsiscanf.c newlib/libc/stdio/vsniprintf.c newlib/libc/stdio/vsnprintf.c newlib/libc/stdio/vsprintf.c newlib/libc/stdio/vsscanf.c newlib/libc/stdio/wbuf.c newlib/libc/stdio/wsetup.c newlib/libc/stdio64/Makefile.am newlib/libc/stdio64/Makefile.in newlib/libc/stdio64/dummy.c newlib/libc/stdio64/fdopen64.c newlib/libc/stdio64/fgetpos64.c newlib/libc/stdio64/fopen64.c newlib/libc/stdio64/freopen64.c newlib/libc/stdio64/fseeko64.c newlib/libc/stdio64/fsetpos64.c newlib/libc/stdio64/ftello64.c newlib/libc/stdio64/stdio64.c newlib/libc/stdio64/stdio64.tex newlib/libc/stdio64/tmpfile64.c newlib/libc/stdlib/Makefile.am newlib/libc/stdlib/Makefile.in newlib/libc/stdlib/_Exit.c newlib/libc/stdlib/__adjust.c newlib/libc/stdlib/__atexit.c newlib/libc/stdlib/__call_atexit.c newlib/libc/stdlib/__exp10.c newlib/libc/stdlib/__ten_mu.c newlib/libc/stdlib/a64l.c newlib/libc/stdlib/abort.c newlib/libc/stdlib/abs.c newlib/libc/stdlib/assert.c newlib/libc/stdlib/atexit.c newlib/libc/stdlib/atexit.h newlib/libc/stdlib/atof.c newlib/libc/stdlib/atoff.c newlib/libc/stdlib/atoi.c newlib/libc/stdlib/atol.c newlib/libc/stdlib/atoll.c newlib/libc/stdlib/btowc.c newlib/libc/stdlib/calloc.c newlib/libc/stdlib/cxa_atexit.c newlib/libc/stdlib/cxa_finalize.c newlib/libc/stdlib/div.c newlib/libc/stdlib/drand48.c newlib/libc/stdlib/dtoa.c newlib/libc/stdlib/dtoastub.c newlib/libc/stdlib/ecvtbuf.c newlib/libc/stdlib/efgcvt.c newlib/libc/stdlib/environ.c newlib/libc/stdlib/envlock.c newlib/libc/stdlib/eprintf.c newlib/libc/stdlib/erand48.c newlib/libc/stdlib/exit.c newlib/libc/stdlib/gd_qnan.h newlib/libc/stdlib/gdtoa-gethex.c newlib/libc/stdlib/gdtoa-hexnan.c newlib/libc/stdlib/gdtoa.h newlib/libc/stdlib/getenv.c newlib/libc/stdlib/getenv_r.c newlib/libc/stdlib/getopt.c newlib/libc/stdlib/getsubopt.3 newlib/libc/stdlib/getsubopt.c newlib/libc/stdlib/jrand48.c newlib/libc/stdlib/l64a.c newlib/libc/stdlib/labs.c newlib/libc/stdlib/lcong48.c newlib/libc/stdlib/ldiv.c newlib/libc/stdlib/ldtoa.c newlib/libc/stdlib/llabs.c newlib/libc/stdlib/lldiv.c newlib/libc/stdlib/local.h newlib/libc/stdlib/lrand48.c newlib/libc/stdlib/malign.c newlib/libc/stdlib/malloc.c newlib/libc/stdlib/mallocr.c newlib/libc/stdlib/mbctype.h newlib/libc/stdlib/mblen.c newlib/libc/stdlib/mblen_r.c newlib/libc/stdlib/mbrlen.c newlib/libc/stdlib/mbrtowc.c newlib/libc/stdlib/mbsinit.c newlib/libc/stdlib/mbsrtowcs.c newlib/libc/stdlib/mbstowcs.c newlib/libc/stdlib/mbstowcs_r.c newlib/libc/stdlib/mbtowc.c newlib/libc/stdlib/mbtowc_r.c newlib/libc/stdlib/mlock.c newlib/libc/stdlib/mprec.c newlib/libc/stdlib/mprec.h newlib/libc/stdlib/mrand48.c newlib/libc/stdlib/msize.c newlib/libc/stdlib/mstats.c newlib/libc/stdlib/mtrim.c newlib/libc/stdlib/nrand48.c newlib/libc/stdlib/on_exit.c newlib/libc/stdlib/putenv.c newlib/libc/stdlib/putenv_r.c newlib/libc/stdlib/rand.c newlib/libc/stdlib/rand48.c newlib/libc/stdlib/rand48.h newlib/libc/stdlib/rand_r.c newlib/libc/stdlib/realloc.c newlib/libc/stdlib/seed48.c newlib/libc/stdlib/setenv.c newlib/libc/stdlib/setenv_r.c newlib/libc/stdlib/srand48.c newlib/libc/stdlib/std.h newlib/libc/stdlib/stdlib.tex newlib/libc/stdlib/strtod.c newlib/libc/stdlib/strtol.c newlib/libc/stdlib/strtoll.c newlib/libc/stdlib/strtoll_r.c newlib/libc/stdlib/strtoul.c newlib/libc/stdlib/strtoull.c newlib/libc/stdlib/strtoull_r.c newlib/libc/stdlib/system.c newlib/libc/stdlib/valloc.c newlib/libc/stdlib/wcrtomb.c newlib/libc/stdlib/wcsrtombs.c newlib/libc/stdlib/wcstol.c newlib/libc/stdlib/wcstoll.c newlib/libc/stdlib/wcstoll_r.c newlib/libc/stdlib/wcstombs.c newlib/libc/stdlib/wcstombs_r.c newlib/libc/stdlib/wcstoul.c newlib/libc/stdlib/wcstoull.c newlib/libc/stdlib/wcstoull_r.c newlib/libc/stdlib/wctob.c newlib/libc/stdlib/wctomb.c newlib/libc/stdlib/wctomb_r.c newlib/libc/string/Makefile.am newlib/libc/string/Makefile.in newlib/libc/string/bcmp.c newlib/libc/string/bcopy.c newlib/libc/string/bzero.c newlib/libc/string/index.c newlib/libc/string/memccpy.c newlib/libc/string/memchr.c newlib/libc/string/memcmp.c newlib/libc/string/memcpy.c newlib/libc/string/memmem.c newlib/libc/string/memmove.c newlib/libc/string/mempcpy.c newlib/libc/string/memset.c newlib/libc/string/rindex.c newlib/libc/string/stpcpy.c newlib/libc/string/stpncpy.c newlib/libc/string/str-two-way.h newlib/libc/string/strcasecmp.c newlib/libc/string/strcasestr.c newlib/libc/string/strcat.c newlib/libc/string/strchr.c newlib/libc/string/strcmp.c newlib/libc/string/strcoll.c newlib/libc/string/strcpy.c newlib/libc/string/strcspn.c newlib/libc/string/strdup.c newlib/libc/string/strdup_r.c newlib/libc/string/strerror.c newlib/libc/string/strerror_r.c newlib/libc/string/strings.tex newlib/libc/string/strlcat.c newlib/libc/string/strlcpy.c newlib/libc/string/strlen.c newlib/libc/string/strlwr.c newlib/libc/string/strncasecmp.c newlib/libc/string/strncat.c newlib/libc/string/strncmp.c newlib/libc/string/strncpy.c newlib/libc/string/strndup.c newlib/libc/string/strndup_r.c newlib/libc/string/strnlen.c newlib/libc/string/strpbrk.c newlib/libc/string/strrchr.c newlib/libc/string/strsep.c newlib/libc/string/strspn.c newlib/libc/string/strstr.c newlib/libc/string/strtok.c newlib/libc/string/strtok_r.c newlib/libc/string/strupr.c newlib/libc/string/strxfrm.c newlib/libc/string/swab.c newlib/libc/string/u_strerr.c newlib/libc/string/wcpcpy.c newlib/libc/string/wcpncpy.c newlib/libc/string/wcscat.c newlib/libc/string/wcschr.c newlib/libc/string/wcscmp.c newlib/libc/string/wcscoll.c newlib/libc/string/wcscpy.c newlib/libc/string/wcscspn.c newlib/libc/string/wcslcat.c newlib/libc/string/wcslcpy.c newlib/libc/string/wcslen.c newlib/libc/string/wcsncat.c newlib/libc/string/wcsncmp.c newlib/libc/string/wcsncpy.c newlib/libc/string/wcsnlen.c newlib/libc/string/wcspbrk.c newlib/libc/string/wcsrchr.c newlib/libc/string/wcsspn.c newlib/libc/string/wcsstr.c newlib/libc/string/wcstrings.tex newlib/libc/string/wcswidth.c newlib/libc/string/wcsxfrm.c newlib/libc/string/wcwidth.c newlib/libc/string/wmemchr.c newlib/libc/string/wmemcmp.c newlib/libc/string/wmemcpy.c newlib/libc/string/wmemmove.c newlib/libc/string/wmemset.c newlib/libc/sys.tex newlib/libc/sys/Makefile.am newlib/libc/sys/Makefile.in newlib/libc/sys/a29khif/Makefile.am newlib/libc/sys/a29khif/Makefile.in newlib/libc/sys/a29khif/_alloc.S newlib/libc/sys/a29khif/_close.S newlib/libc/sys/a29khif/_cycles.S newlib/libc/sys/a29khif/_exit.S newlib/libc/sys/a29khif/_fstat.S newlib/libc/sys/a29khif/_getpsiz.S newlib/libc/sys/a29khif/_gettz.S newlib/libc/sys/a29khif/_ioctl.S newlib/libc/sys/a29khif/_iostat.S newlib/libc/sys/a29khif/_iowait.S newlib/libc/sys/a29khif/_isatty.S newlib/libc/sys/a29khif/_lseek.S newlib/libc/sys/a29khif/_open.S newlib/libc/sys/a29khif/_query.S newlib/libc/sys/a29khif/_read.S newlib/libc/sys/a29khif/_sbrk.S newlib/libc/sys/a29khif/_setim.S newlib/libc/sys/a29khif/_settrap.S newlib/libc/sys/a29khif/_setvec.S newlib/libc/sys/a29khif/_tmpnam.S newlib/libc/sys/a29khif/_write.S newlib/libc/sys/a29khif/aclocal.m4 newlib/libc/sys/a29khif/alloc.S newlib/libc/sys/a29khif/clock.S newlib/libc/sys/a29khif/configure newlib/libc/sys/a29khif/configure.in newlib/libc/sys/a29khif/crt0.S newlib/libc/sys/a29khif/getargs.S newlib/libc/sys/a29khif/getenv.S newlib/libc/sys/a29khif/getpid.c newlib/libc/sys/a29khif/kill.c newlib/libc/sys/a29khif/read.S newlib/libc/sys/a29khif/remove.S newlib/libc/sys/a29khif/rename.S newlib/libc/sys/a29khif/signal.S newlib/libc/sys/a29khif/stubs.S newlib/libc/sys/a29khif/sys/cpudef.h newlib/libc/sys/a29khif/sys/fpsymbol.h newlib/libc/sys/a29khif/sys/intrinsi.h newlib/libc/sys/a29khif/sys/macros.h newlib/libc/sys/a29khif/sys/proreg.h newlib/libc/sys/a29khif/sys/romdcl.h newlib/libc/sys/a29khif/sys/smartmac.h newlib/libc/sys/a29khif/sys/sysmac.h newlib/libc/sys/a29khif/systime.S newlib/libc/sys/a29khif/vec.S newlib/libc/sys/aclocal.m4 newlib/libc/sys/arc/Makefile.am newlib/libc/sys/arc/Makefile.in newlib/libc/sys/arc/aclocal.m4 newlib/libc/sys/arc/configure newlib/libc/sys/arc/configure.in newlib/libc/sys/arc/crt0.S newlib/libc/sys/arc/dummy.S newlib/libc/sys/arc/isatty.c newlib/libc/sys/arc/mem-layout.c newlib/libc/sys/arc/sbrk.c newlib/libc/sys/arc/sys/syscall.h newlib/libc/sys/arc/syscalls.c newlib/libc/sys/arm/Makefile.am newlib/libc/sys/arm/Makefile.in newlib/libc/sys/arm/aclocal.m4 newlib/libc/sys/arm/aeabi_atexit.c newlib/libc/sys/arm/configure newlib/libc/sys/arm/configure.in newlib/libc/sys/arm/crt0.S newlib/libc/sys/arm/libcfunc.c newlib/libc/sys/arm/swi.h newlib/libc/sys/arm/sys/fcntl.h newlib/libc/sys/arm/sys/param.h newlib/libc/sys/arm/syscalls.c newlib/libc/sys/arm/trap.S newlib/libc/sys/configure newlib/libc/sys/configure.in newlib/libc/sys/d10v/Makefile.am newlib/libc/sys/d10v/Makefile.in newlib/libc/sys/d10v/aclocal.m4 newlib/libc/sys/d10v/configure newlib/libc/sys/d10v/configure.in newlib/libc/sys/d10v/creat.c newlib/libc/sys/d10v/crt0.S newlib/libc/sys/d10v/sys/syscall.h newlib/libc/sys/d10v/syscalls.c newlib/libc/sys/d10v/trap.S newlib/libc/sys/decstation/Makefile.am newlib/libc/sys/decstation/Makefile.in newlib/libc/sys/decstation/_main.c newlib/libc/sys/decstation/aclocal.m4 newlib/libc/sys/decstation/configure newlib/libc/sys/decstation/configure.in newlib/libc/sys/decstation/sys/dirent.h newlib/libc/sys/h8300hms/Makefile.am newlib/libc/sys/h8300hms/Makefile.in newlib/libc/sys/h8300hms/_exit.S newlib/libc/sys/h8300hms/aclocal.m4 newlib/libc/sys/h8300hms/close.S newlib/libc/sys/h8300hms/configure newlib/libc/sys/h8300hms/configure.in newlib/libc/sys/h8300hms/crt0.S newlib/libc/sys/h8300hms/crt1.c newlib/libc/sys/h8300hms/fstat.S newlib/libc/sys/h8300hms/lseek.S newlib/libc/sys/h8300hms/misc.c newlib/libc/sys/h8300hms/open.S newlib/libc/sys/h8300hms/read.S newlib/libc/sys/h8300hms/sbrk.c newlib/libc/sys/h8300hms/setarch.h newlib/libc/sys/h8300hms/stat.S newlib/libc/sys/h8300hms/sys/file.h newlib/libc/sys/h8300hms/sys/syscall.h newlib/libc/sys/h8300hms/syscalls.c newlib/libc/sys/h8300hms/write.S newlib/libc/sys/h8500hms/Makefile.am newlib/libc/sys/h8500hms/Makefile.in newlib/libc/sys/h8500hms/aclocal.m4 newlib/libc/sys/h8500hms/configure newlib/libc/sys/h8500hms/configure.in newlib/libc/sys/h8500hms/crt0.c newlib/libc/sys/h8500hms/misc.c newlib/libc/sys/h8500hms/syscalls.c newlib/libc/sys/linux/Makefile.am newlib/libc/sys/linux/Makefile.in newlib/libc/sys/linux/aclocal.m4 newlib/libc/sys/linux/aio.c newlib/libc/sys/linux/aio64.c newlib/libc/sys/linux/argp/Makefile.am newlib/libc/sys/linux/argp/Makefile.in newlib/libc/sys/linux/argp/argp-ba.c newlib/libc/sys/linux/argp/argp-eexst.c newlib/libc/sys/linux/argp/argp-fmtstream.c newlib/libc/sys/linux/argp/argp-fmtstream.h newlib/libc/sys/linux/argp/argp-fs-xinl.c newlib/libc/sys/linux/argp/argp-help.c newlib/libc/sys/linux/argp/argp-namefrob.h newlib/libc/sys/linux/argp/argp-parse.c newlib/libc/sys/linux/argp/argp-pv.c newlib/libc/sys/linux/argp/argp-pvh.c newlib/libc/sys/linux/argp/argp-xinl.c newlib/libc/sys/linux/bits/initspin.h newlib/libc/sys/linux/bits/libc-lock.h newlib/libc/sys/linux/bits/pthreadtypes.h newlib/libc/sys/linux/bits/typesizes.h newlib/libc/sys/linux/bp-checks.h newlib/libc/sys/linux/brk.c newlib/libc/sys/linux/calloc.c newlib/libc/sys/linux/callocr.c newlib/libc/sys/linux/cfreer.c newlib/libc/sys/linux/cfspeed.c newlib/libc/sys/linux/clock_getres.c newlib/libc/sys/linux/clock_gettime.c newlib/libc/sys/linux/clock_settime.c newlib/libc/sys/linux/cmath/Makefile.am newlib/libc/sys/linux/cmath/Makefile.in newlib/libc/sys/linux/cmath/math_private.h newlib/libc/sys/linux/cmath/s_cacos.c newlib/libc/sys/linux/cmath/s_cacosf.c newlib/libc/sys/linux/cmath/s_cacosh.c newlib/libc/sys/linux/cmath/s_cacoshf.c newlib/libc/sys/linux/cmath/s_cacoshl.c newlib/libc/sys/linux/cmath/s_cacosl.c newlib/libc/sys/linux/cmath/s_casin.c newlib/libc/sys/linux/cmath/s_casinf.c newlib/libc/sys/linux/cmath/s_casinh.c newlib/libc/sys/linux/cmath/s_casinhf.c newlib/libc/sys/linux/cmath/s_casinhl.c newlib/libc/sys/linux/cmath/s_casinl.c newlib/libc/sys/linux/cmath/s_catan.c newlib/libc/sys/linux/cmath/s_catanf.c newlib/libc/sys/linux/cmath/s_catanh.c newlib/libc/sys/linux/cmath/s_catanhf.c newlib/libc/sys/linux/cmath/s_catanhl.c newlib/libc/sys/linux/cmath/s_catanl.c newlib/libc/sys/linux/cmath/s_cbrtl.c newlib/libc/sys/linux/cmath/s_ccos.c newlib/libc/sys/linux/cmath/s_ccosf.c newlib/libc/sys/linux/cmath/s_ccosh.c newlib/libc/sys/linux/cmath/s_ccoshf.c newlib/libc/sys/linux/cmath/s_ccoshl.c newlib/libc/sys/linux/cmath/s_ccosl.c newlib/libc/sys/linux/cmath/s_cexp.c newlib/libc/sys/linux/cmath/s_cexpf.c newlib/libc/sys/linux/cmath/s_cexpl.c newlib/libc/sys/linux/cmath/s_clog.c newlib/libc/sys/linux/cmath/s_clog10.c newlib/libc/sys/linux/cmath/s_clog10f.c newlib/libc/sys/linux/cmath/s_clog10l.c newlib/libc/sys/linux/cmath/s_clogf.c newlib/libc/sys/linux/cmath/s_clogl.c newlib/libc/sys/linux/cmath/s_cpow.c newlib/libc/sys/linux/cmath/s_cpowf.c newlib/libc/sys/linux/cmath/s_cpowl.c newlib/libc/sys/linux/cmath/s_cproj.c newlib/libc/sys/linux/cmath/s_cprojf.c newlib/libc/sys/linux/cmath/s_cprojl.c newlib/libc/sys/linux/cmath/s_csin.c newlib/libc/sys/linux/cmath/s_csinf.c newlib/libc/sys/linux/cmath/s_csinh.c newlib/libc/sys/linux/cmath/s_csinhf.c newlib/libc/sys/linux/cmath/s_csinhl.c newlib/libc/sys/linux/cmath/s_csinl.c newlib/libc/sys/linux/cmath/s_csqrt.c newlib/libc/sys/linux/cmath/s_csqrtf.c newlib/libc/sys/linux/cmath/s_csqrtl.c newlib/libc/sys/linux/cmath/s_ctan.c newlib/libc/sys/linux/cmath/s_ctanf.c newlib/libc/sys/linux/cmath/s_ctanh.c newlib/libc/sys/linux/cmath/s_ctanhf.c newlib/libc/sys/linux/cmath/s_ctanhl.c newlib/libc/sys/linux/cmath/s_ctanl.c newlib/libc/sys/linux/config.h newlib/libc/sys/linux/configure newlib/libc/sys/linux/configure.in newlib/libc/sys/linux/confstr.c newlib/libc/sys/linux/confstr.h newlib/libc/sys/linux/crt1.c newlib/libc/sys/linux/ctermid.c newlib/libc/sys/linux/dl/Makefile.am newlib/libc/sys/linux/dl/Makefile.in newlib/libc/sys/linux/dl/abi-tag.h newlib/libc/sys/linux/dl/atomicity.h newlib/libc/sys/linux/dl/dl-addr.c newlib/libc/sys/linux/dl/dl-cache.c newlib/libc/sys/linux/dl/dl-cache.h newlib/libc/sys/linux/dl/dl-close.c newlib/libc/sys/linux/dl/dl-debug.c newlib/libc/sys/linux/dl/dl-deps.c newlib/libc/sys/linux/dl/dl-dst.h newlib/libc/sys/linux/dl/dl-error.c newlib/libc/sys/linux/dl/dl-fini.c newlib/libc/sys/linux/dl/dl-init.c newlib/libc/sys/linux/dl/dl-iteratephdr.c newlib/libc/sys/linux/dl/dl-libc.c newlib/libc/sys/linux/dl/dl-librecon.h newlib/libc/sys/linux/dl/dl-load.c newlib/libc/sys/linux/dl/dl-local.h newlib/libc/sys/linux/dl/dl-lookup.c newlib/libc/sys/linux/dl/dl-lookupcfg.h newlib/libc/sys/linux/dl/dl-minimal.c newlib/libc/sys/linux/dl/dl-misc.c newlib/libc/sys/linux/dl/dl-object.c newlib/libc/sys/linux/dl/dl-open.c newlib/libc/sys/linux/dl/dl-osinfo.h newlib/libc/sys/linux/dl/dl-profile.c newlib/libc/sys/linux/dl/dl-profstub.c newlib/libc/sys/linux/dl/dl-reloc.c newlib/libc/sys/linux/dl/dl-runtime.c newlib/libc/sys/linux/dl/dl-support.c newlib/libc/sys/linux/dl/dl-sym.c newlib/libc/sys/linux/dl/dl-version.c newlib/libc/sys/linux/dl/do-lookup.h newlib/libc/sys/linux/dl/do-rel.h newlib/libc/sys/linux/dl/dynamic-link.h newlib/libc/sys/linux/dl/kernel-features.h newlib/libc/sys/linux/dl/ldsodefs.h newlib/libc/sys/linux/dl/libintl.h newlib/libc/sys/linux/dl/trusted-dirs.h newlib/libc/sys/linux/dl/unsecvars.h newlib/libc/sys/linux/fclean.c newlib/libc/sys/linux/flockfile.c newlib/libc/sys/linux/fpathconf.c newlib/libc/sys/linux/free.c newlib/libc/sys/linux/freer.c newlib/libc/sys/linux/fstab.c newlib/libc/sys/linux/fstatvfs.c newlib/libc/sys/linux/fstatvfs64.c newlib/libc/sys/linux/ftok.c newlib/libc/sys/linux/ftw.c newlib/libc/sys/linux/ftw64.c newlib/libc/sys/linux/funlockfile.c newlib/libc/sys/linux/getdate.c newlib/libc/sys/linux/getdate_err.c newlib/libc/sys/linux/gethostid.c newlib/libc/sys/linux/gethostname.c newlib/libc/sys/linux/getlogin.c newlib/libc/sys/linux/getopt.c newlib/libc/sys/linux/getopt1.c newlib/libc/sys/linux/getpwent.c newlib/libc/sys/linux/getreent.c newlib/libc/sys/linux/getrlimit64.c newlib/libc/sys/linux/getwd.c newlib/libc/sys/linux/hp-timing.h newlib/libc/sys/linux/iconv/Makefile.am newlib/libc/sys/linux/iconv/Makefile.in newlib/libc/sys/linux/iconv/categories.def newlib/libc/sys/linux/iconv/dummy-repertoire.c newlib/libc/sys/linux/iconv/gconv.c newlib/libc/sys/linux/iconv/gconv_builtin.c newlib/libc/sys/linux/iconv/gconv_builtin.h newlib/libc/sys/linux/iconv/gconv_cache.c newlib/libc/sys/linux/iconv/gconv_charset.h newlib/libc/sys/linux/iconv/gconv_close.c newlib/libc/sys/linux/iconv/gconv_conf.c newlib/libc/sys/linux/iconv/gconv_db.c newlib/libc/sys/linux/iconv/gconv_dl.c newlib/libc/sys/linux/iconv/gconv_int.h newlib/libc/sys/linux/iconv/gconv_open.c newlib/libc/sys/linux/iconv/gconv_simple.c newlib/libc/sys/linux/iconv/gconv_trans.c newlib/libc/sys/linux/iconv/hash-string.h newlib/libc/sys/linux/iconv/iconv.c newlib/libc/sys/linux/iconv/iconv.h newlib/libc/sys/linux/iconv/iconv_charmap.c newlib/libc/sys/linux/iconv/iconv_close.c newlib/libc/sys/linux/iconv/iconv_open.c newlib/libc/sys/linux/iconv/iconvconfig.h newlib/libc/sys/linux/iconv/loadinfo.h newlib/libc/sys/linux/iconv/localeinfo.h newlib/libc/sys/linux/iconv/loop.c newlib/libc/sys/linux/iconv/skeleton.c newlib/libc/sys/linux/ids.c newlib/libc/sys/linux/include/argp.h newlib/libc/sys/linux/include/arpa/ftp.h newlib/libc/sys/linux/include/arpa/inet.h newlib/libc/sys/linux/include/arpa/nameser.h newlib/libc/sys/linux/include/arpa/nameser_compat.h newlib/libc/sys/linux/include/arpa/telnet.h newlib/libc/sys/linux/include/arpa/tftp.h newlib/libc/sys/linux/include/bp-sym.h newlib/libc/sys/linux/include/cmathcalls.h newlib/libc/sys/linux/include/complex.h newlib/libc/sys/linux/include/dl-hash.h newlib/libc/sys/linux/include/dlfcn.h newlib/libc/sys/linux/include/fnmatch.h newlib/libc/sys/linux/include/gconv.h newlib/libc/sys/linux/include/getopt.h newlib/libc/sys/linux/include/glob.h newlib/libc/sys/linux/include/hesiod.h newlib/libc/sys/linux/include/iconv.h newlib/libc/sys/linux/include/ifaddrs.h newlib/libc/sys/linux/include/limits.h newlib/libc/sys/linux/include/link.h newlib/libc/sys/linux/include/ltdl.h newlib/libc/sys/linux/include/malloc.h newlib/libc/sys/linux/include/mcheck.h newlib/libc/sys/linux/include/mqueue.h newlib/libc/sys/linux/include/namespace.h newlib/libc/sys/linux/include/net/bpf.h newlib/libc/sys/linux/include/net/bpf_compat.h newlib/libc/sys/linux/include/net/bpfdesc.h newlib/libc/sys/linux/include/net/bridge.h newlib/libc/sys/linux/include/net/ethernet.h newlib/libc/sys/linux/include/net/fddi.h newlib/libc/sys/linux/include/net/if.h newlib/libc/sys/linux/include/net/if_arc.h newlib/libc/sys/linux/include/net/if_arp.h newlib/libc/sys/linux/include/net/if_dl.h newlib/libc/sys/linux/include/net/if_gif.h newlib/libc/sys/linux/include/net/if_ieee80211.h newlib/libc/sys/linux/include/net/if_llc.h newlib/libc/sys/linux/include/net/if_mib.h newlib/libc/sys/linux/include/net/if_ppp.h newlib/libc/sys/linux/include/net/if_slvar.h newlib/libc/sys/linux/include/net/if_sppp.h newlib/libc/sys/linux/include/net/if_stf.h newlib/libc/sys/linux/include/net/if_tap.h newlib/libc/sys/linux/include/net/if_tapvar.h newlib/libc/sys/linux/include/net/if_tun.h newlib/libc/sys/linux/include/net/if_tunvar.h newlib/libc/sys/linux/include/net/if_types.h newlib/libc/sys/linux/include/net/if_var.h newlib/libc/sys/linux/include/net/if_vlan_var.h newlib/libc/sys/linux/include/net/intrq.h newlib/libc/sys/linux/include/net/iso88025.h newlib/libc/sys/linux/include/net/net_osdep.h newlib/libc/sys/linux/include/net/netisr.h newlib/libc/sys/linux/include/net/pfil.h newlib/libc/sys/linux/include/net/pfkeyv2.h newlib/libc/sys/linux/include/net/ppp_comp.h newlib/libc/sys/linux/include/net/ppp_defs.h newlib/libc/sys/linux/include/net/radix.h newlib/libc/sys/linux/include/net/raw_cb.h newlib/libc/sys/linux/include/net/route.h newlib/libc/sys/linux/include/net/slcompress.h newlib/libc/sys/linux/include/net/slip.h newlib/libc/sys/linux/include/net/zlib.h newlib/libc/sys/linux/include/netconfig.h newlib/libc/sys/linux/include/netdb.h newlib/libc/sys/linux/include/netinet/icmp6.h newlib/libc/sys/linux/include/netinet/icmp_var.h newlib/libc/sys/linux/include/netinet/if_ether.h newlib/libc/sys/linux/include/netinet/igmp.h newlib/libc/sys/linux/include/netinet/igmp_var.h newlib/libc/sys/linux/include/netinet/in.h newlib/libc/sys/linux/include/netinet/in_gif.h newlib/libc/sys/linux/include/netinet/in_pcb.h newlib/libc/sys/linux/include/netinet/in_systm.h newlib/libc/sys/linux/include/netinet/in_var.h newlib/libc/sys/linux/include/netinet/ip.h newlib/libc/sys/linux/include/netinet/ip6.h newlib/libc/sys/linux/include/netinet/ip_dummynet.h newlib/libc/sys/linux/include/netinet/ip_ecn.h newlib/libc/sys/linux/include/netinet/ip_encap.h newlib/libc/sys/linux/include/netinet/ip_fw.h newlib/libc/sys/linux/include/netinet/ip_icmp.h newlib/libc/sys/linux/include/netinet/ip_mroute.h newlib/libc/sys/linux/include/netinet/ip_var.h newlib/libc/sys/linux/include/netinet/ipprotosw.h newlib/libc/sys/linux/include/netinet/tcp.h newlib/libc/sys/linux/include/netinet/tcp_debug.h newlib/libc/sys/linux/include/netinet/tcp_fsm.h newlib/libc/sys/linux/include/netinet/tcp_seq.h newlib/libc/sys/linux/include/netinet/tcp_timer.h newlib/libc/sys/linux/include/netinet/tcp_var.h newlib/libc/sys/linux/include/netinet/tcpip.h newlib/libc/sys/linux/include/netinet/udp.h newlib/libc/sys/linux/include/netinet/udp_var.h newlib/libc/sys/linux/include/netinet6/ah.h newlib/libc/sys/linux/include/netinet6/ah6.h newlib/libc/sys/linux/include/netinet6/esp.h newlib/libc/sys/linux/include/netinet6/esp6.h newlib/libc/sys/linux/include/netinet6/esp_rijndael.h newlib/libc/sys/linux/include/netinet6/icmp6.h newlib/libc/sys/linux/include/netinet6/in6.h newlib/libc/sys/linux/include/netinet6/in6_gif.h newlib/libc/sys/linux/include/netinet6/in6_ifattach.h newlib/libc/sys/linux/include/netinet6/in6_pcb.h newlib/libc/sys/linux/include/netinet6/in6_prefix.h newlib/libc/sys/linux/include/netinet6/in6_var.h newlib/libc/sys/linux/include/netinet6/ip6.h newlib/libc/sys/linux/include/netinet6/ip6_ecn.h newlib/libc/sys/linux/include/netinet6/ip6_fw.h newlib/libc/sys/linux/include/netinet6/ip6_mroute.h newlib/libc/sys/linux/include/netinet6/ip6_var.h newlib/libc/sys/linux/include/netinet6/ip6protosw.h newlib/libc/sys/linux/include/netinet6/ipcomp.h newlib/libc/sys/linux/include/netinet6/ipcomp6.h newlib/libc/sys/linux/include/netinet6/ipsec.h newlib/libc/sys/linux/include/netinet6/ipsec6.h newlib/libc/sys/linux/include/netinet6/mld6_var.h newlib/libc/sys/linux/include/netinet6/nd6.h newlib/libc/sys/linux/include/netinet6/pim6.h newlib/libc/sys/linux/include/netinet6/pim6_var.h newlib/libc/sys/linux/include/netinet6/raw_ip6.h newlib/libc/sys/linux/include/netinet6/scope6_var.h newlib/libc/sys/linux/include/netinet6/tcp6_var.h newlib/libc/sys/linux/include/netinet6/udp6_var.h newlib/libc/sys/linux/include/netns/idp.h newlib/libc/sys/linux/include/netns/idp_var.h newlib/libc/sys/linux/include/netns/ns.h newlib/libc/sys/linux/include/netns/ns_error.h newlib/libc/sys/linux/include/netns/ns_if.h newlib/libc/sys/linux/include/netns/ns_pcb.h newlib/libc/sys/linux/include/netns/sp.h newlib/libc/sys/linux/include/netns/spidp.h newlib/libc/sys/linux/include/netns/spp_debug.h newlib/libc/sys/linux/include/netns/spp_timer.h newlib/libc/sys/linux/include/netns/spp_var.h newlib/libc/sys/linux/include/paths.h newlib/libc/sys/linux/include/pthread.h newlib/libc/sys/linux/include/regex.h newlib/libc/sys/linux/include/resolv.h newlib/libc/sys/linux/include/rpc/Makefile newlib/libc/sys/linux/include/rpc/auth.h newlib/libc/sys/linux/include/rpc/auth_des.h newlib/libc/sys/linux/include/rpc/auth_kerb.h newlib/libc/sys/linux/include/rpc/auth_unix.h newlib/libc/sys/linux/include/rpc/clnt.h newlib/libc/sys/linux/include/rpc/clnt_soc.h newlib/libc/sys/linux/include/rpc/clnt_stat.h newlib/libc/sys/linux/include/rpc/des.h newlib/libc/sys/linux/include/rpc/des_crypt.h newlib/libc/sys/linux/include/rpc/nettype.h newlib/libc/sys/linux/include/rpc/pmap_clnt.h newlib/libc/sys/linux/include/rpc/pmap_prot.h newlib/libc/sys/linux/include/rpc/pmap_rmt.h newlib/libc/sys/linux/include/rpc/raw.h newlib/libc/sys/linux/include/rpc/rpc.h newlib/libc/sys/linux/include/rpc/rpc_com.h newlib/libc/sys/linux/include/rpc/rpc_msg.h newlib/libc/sys/linux/include/rpc/rpcb_clnt.h newlib/libc/sys/linux/include/rpc/rpcb_prot.h newlib/libc/sys/linux/include/rpc/rpcb_prot.x newlib/libc/sys/linux/include/rpc/rpcent.h newlib/libc/sys/linux/include/rpc/svc.h newlib/libc/sys/linux/include/rpc/svc_auth.h newlib/libc/sys/linux/include/rpc/svc_dg.h newlib/libc/sys/linux/include/rpc/svc_soc.h newlib/libc/sys/linux/include/rpc/types.h newlib/libc/sys/linux/include/rpc/xdr.h newlib/libc/sys/linux/include/rune.h newlib/libc/sys/linux/include/runetype.h newlib/libc/sys/linux/include/sched.h newlib/libc/sys/linux/include/semaphore.h newlib/libc/sys/linux/include/setjmp.h newlib/libc/sys/linux/include/setlocale.h newlib/libc/sys/linux/include/stdint.h newlib/libc/sys/linux/include/time.h newlib/libc/sys/linux/include/un-namespace.h newlib/libc/sys/linux/include/unistd.h newlib/libc/sys/linux/include/wordexp.h newlib/libc/sys/linux/inode.c newlib/libc/sys/linux/internal_statvfs.c newlib/libc/sys/linux/intl/Makefile.am newlib/libc/sys/linux/intl/Makefile.in newlib/libc/sys/linux/intl/bindtextdom.c newlib/libc/sys/linux/intl/catgets.c newlib/libc/sys/linux/intl/catgetsinfo.h newlib/libc/sys/linux/intl/config.h newlib/libc/sys/linux/intl/dcgettext.c newlib/libc/sys/linux/intl/dcigettext.c newlib/libc/sys/linux/intl/dcngettext.c newlib/libc/sys/linux/intl/dgettext.c newlib/libc/sys/linux/intl/dngettext.c newlib/libc/sys/linux/intl/explodename.c newlib/libc/sys/linux/intl/finddomain.c newlib/libc/sys/linux/intl/gettext.c newlib/libc/sys/linux/intl/gettext.h newlib/libc/sys/linux/intl/gettextP.h newlib/libc/sys/linux/intl/hash-string.h newlib/libc/sys/linux/intl/l10nflist.c newlib/libc/sys/linux/intl/lcl_stpcpy.c newlib/libc/sys/linux/intl/loadinfo.h newlib/libc/sys/linux/intl/loadmsgcat.c newlib/libc/sys/linux/intl/localealias.c newlib/libc/sys/linux/intl/ngettext.c newlib/libc/sys/linux/intl/open_catalog.c newlib/libc/sys/linux/intl/plural.c newlib/libc/sys/linux/intl/plural.y newlib/libc/sys/linux/intl/textdomain.c newlib/libc/sys/linux/io.c newlib/libc/sys/linux/io64.c newlib/libc/sys/linux/ipc.c newlib/libc/sys/linux/isatty.c newlib/libc/sys/linux/kernel_sigaction.h newlib/libc/sys/linux/libc-internal.h newlib/libc/sys/linux/libc-symbols.h newlib/libc/sys/linux/libc-tsd.h newlib/libc/sys/linux/libintl.h newlib/libc/sys/linux/linux.c newlib/libc/sys/linux/linux_fsinfo.h newlib/libc/sys/linux/linuxthreads/LICENSE newlib/libc/sys/linux/linuxthreads/Makefile.am newlib/libc/sys/linux/linuxthreads/Makefile.in newlib/libc/sys/linux/linuxthreads/aclocal.m4 newlib/libc/sys/linux/linuxthreads/attr.c newlib/libc/sys/linux/linuxthreads/barrier.c newlib/libc/sys/linux/linuxthreads/bits/initspin.h newlib/libc/sys/linux/linuxthreads/bits/libc-lock.h newlib/libc/sys/linux/linuxthreads/bits/libc-tsd.h newlib/libc/sys/linux/linuxthreads/bits/local_lim.h newlib/libc/sys/linux/linuxthreads/bits/posix_opt.h newlib/libc/sys/linux/linuxthreads/bits/pthreadtypes.h newlib/libc/sys/linux/linuxthreads/bits/sigthread.h newlib/libc/sys/linux/linuxthreads/bp-sym.h newlib/libc/sys/linux/linuxthreads/cancel.c newlib/libc/sys/linux/linuxthreads/condvar.c newlib/libc/sys/linux/linuxthreads/config.h newlib/libc/sys/linux/linuxthreads/configure newlib/libc/sys/linux/linuxthreads/configure.in newlib/libc/sys/linux/linuxthreads/defs.awk newlib/libc/sys/linux/linuxthreads/ecmutex.c newlib/libc/sys/linux/linuxthreads/events.c newlib/libc/sys/linux/linuxthreads/getcpuclockid.c newlib/libc/sys/linux/linuxthreads/getreent.c newlib/libc/sys/linux/linuxthreads/internals.h newlib/libc/sys/linux/linuxthreads/join.c newlib/libc/sys/linux/linuxthreads/joinrace.c newlib/libc/sys/linux/linuxthreads/kernel-features.h newlib/libc/sys/linux/linuxthreads/libc-internal.h newlib/libc/sys/linux/linuxthreads/libc-symbols.h newlib/libc/sys/linux/linuxthreads/linuxthreads.texi newlib/libc/sys/linux/linuxthreads/lockfile.c newlib/libc/sys/linux/linuxthreads/machine/Makefile.am newlib/libc/sys/linux/linuxthreads/machine/Makefile.in newlib/libc/sys/linux/linuxthreads/machine/aclocal.m4 newlib/libc/sys/linux/linuxthreads/machine/configure newlib/libc/sys/linux/linuxthreads/machine/configure.in newlib/libc/sys/linux/linuxthreads/machine/generic/generic-sysdep.h newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.am newlib/libc/sys/linux/linuxthreads/machine/i386/Makefile.in newlib/libc/sys/linux/linuxthreads/machine/i386/aclocal.m4 newlib/libc/sys/linux/linuxthreads/machine/i386/bp-asm.h newlib/libc/sys/linux/linuxthreads/machine/i386/clone.S newlib/libc/sys/linux/linuxthreads/machine/i386/configure newlib/libc/sys/linux/linuxthreads/machine/i386/configure.in newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.S newlib/libc/sys/linux/linuxthreads/machine/i386/i386-sysdep.h newlib/libc/sys/linux/linuxthreads/machine/i386/pspinlock.c newlib/libc/sys/linux/linuxthreads/machine/i386/pt-machine.h newlib/libc/sys/linux/linuxthreads/machine/i386/sigcontextinfo.h newlib/libc/sys/linux/linuxthreads/machine/i386/stackinfo.h newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.S newlib/libc/sys/linux/linuxthreads/machine/i386/sysdep.h newlib/libc/sys/linux/linuxthreads/machine/i386/useldt.h newlib/libc/sys/linux/linuxthreads/manager.c newlib/libc/sys/linux/linuxthreads/mq_notify.c newlib/libc/sys/linux/linuxthreads/mutex.c newlib/libc/sys/linux/linuxthreads/no-tsd.c newlib/libc/sys/linux/linuxthreads/oldsemaphore.c newlib/libc/sys/linux/linuxthreads/posix-timer.h newlib/libc/sys/linux/linuxthreads/prio.c newlib/libc/sys/linux/linuxthreads/proc_service.h newlib/libc/sys/linux/linuxthreads/pt-machine.c newlib/libc/sys/linux/linuxthreads/ptclock_gettime.c newlib/libc/sys/linux/linuxthreads/ptclock_settime.c newlib/libc/sys/linux/linuxthreads/ptfork.c newlib/libc/sys/linux/linuxthreads/pthread.c newlib/libc/sys/linux/linuxthreads/ptlongjmp.c newlib/libc/sys/linux/linuxthreads/queue.h newlib/libc/sys/linux/linuxthreads/reent.c newlib/libc/sys/linux/linuxthreads/reqsyscalls.c newlib/libc/sys/linux/linuxthreads/restart.h newlib/libc/sys/linux/linuxthreads/rwlock.c newlib/libc/sys/linux/linuxthreads/semaphore.c newlib/libc/sys/linux/linuxthreads/semaphore.h newlib/libc/sys/linux/linuxthreads/shlib-compat.h newlib/libc/sys/linux/linuxthreads/signals.c newlib/libc/sys/linux/linuxthreads/specific.c newlib/libc/sys/linux/linuxthreads/spinlock.c newlib/libc/sys/linux/linuxthreads/spinlock.h newlib/libc/sys/linux/linuxthreads/sysctl.c newlib/libc/sys/linux/linuxthreads/td_init.c newlib/libc/sys/linux/linuxthreads/td_log.c newlib/libc/sys/linux/linuxthreads/td_symbol_list.c newlib/libc/sys/linux/linuxthreads/td_ta_clear_event.c newlib/libc/sys/linux/linuxthreads/td_ta_delete.c newlib/libc/sys/linux/linuxthreads/td_ta_enable_stats.c newlib/libc/sys/linux/linuxthreads/td_ta_event_addr.c newlib/libc/sys/linux/linuxthreads/td_ta_event_getmsg.c newlib/libc/sys/linux/linuxthreads/td_ta_get_nthreads.c newlib/libc/sys/linux/linuxthreads/td_ta_get_ph.c newlib/libc/sys/linux/linuxthreads/td_ta_get_stats.c newlib/libc/sys/linux/linuxthreads/td_ta_map_id2thr.c newlib/libc/sys/linux/linuxthreads/td_ta_map_lwp2thr.c newlib/libc/sys/linux/linuxthreads/td_ta_new.c newlib/libc/sys/linux/linuxthreads/td_ta_reset_stats.c newlib/libc/sys/linux/linuxthreads/td_ta_set_event.c newlib/libc/sys/linux/linuxthreads/td_ta_setconcurrency.c newlib/libc/sys/linux/linuxthreads/td_ta_thr_iter.c newlib/libc/sys/linux/linuxthreads/td_ta_tsd_iter.c newlib/libc/sys/linux/linuxthreads/td_thr_clear_event.c newlib/libc/sys/linux/linuxthreads/td_thr_dbresume.c newlib/libc/sys/linux/linuxthreads/td_thr_dbsuspend.c newlib/libc/sys/linux/linuxthreads/td_thr_event_enable.c newlib/libc/sys/linux/linuxthreads/td_thr_event_getmsg.c newlib/libc/sys/linux/linuxthreads/td_thr_get_info.c newlib/libc/sys/linux/linuxthreads/td_thr_getfpregs.c newlib/libc/sys/linux/linuxthreads/td_thr_getgregs.c newlib/libc/sys/linux/linuxthreads/td_thr_getxregs.c newlib/libc/sys/linux/linuxthreads/td_thr_getxregsize.c newlib/libc/sys/linux/linuxthreads/td_thr_set_event.c newlib/libc/sys/linux/linuxthreads/td_thr_setfpregs.c newlib/libc/sys/linux/linuxthreads/td_thr_setgregs.c newlib/libc/sys/linux/linuxthreads/td_thr_setprio.c newlib/libc/sys/linux/linuxthreads/td_thr_setsigpending.c newlib/libc/sys/linux/linuxthreads/td_thr_setxregs.c newlib/libc/sys/linux/linuxthreads/td_thr_sigsetmask.c newlib/libc/sys/linux/linuxthreads/td_thr_tsd.c newlib/libc/sys/linux/linuxthreads/td_thr_validate.c newlib/libc/sys/linux/linuxthreads/testrtsig.h newlib/libc/sys/linux/linuxthreads/thread_db.h newlib/libc/sys/linux/linuxthreads/thread_dbP.h newlib/libc/sys/linux/linuxthreads/timer_create.c newlib/libc/sys/linux/linuxthreads/timer_delete.c newlib/libc/sys/linux/linuxthreads/timer_getoverr.c newlib/libc/sys/linux/linuxthreads/timer_gettime.c newlib/libc/sys/linux/linuxthreads/timer_routines.c newlib/libc/sys/linux/linuxthreads/timer_settime.c newlib/libc/sys/linux/linuxthreads/tst-cancel.c newlib/libc/sys/linux/linuxthreads/tst-context.c newlib/libc/sys/linux/linuxthreads/tststack.c newlib/libc/sys/linux/linuxthreads/unload.c newlib/libc/sys/linux/linuxthreads/weaks.c newlib/libc/sys/linux/linuxthreads/wrapsyscall.c newlib/libc/sys/linux/machine/Makefile.am newlib/libc/sys/linux/machine/Makefile.in newlib/libc/sys/linux/machine/aclocal.m4 newlib/libc/sys/linux/machine/configure newlib/libc/sys/linux/machine/configure.in newlib/libc/sys/linux/machine/hp-timing.h newlib/libc/sys/linux/machine/i386/Makefile.am newlib/libc/sys/linux/machine/i386/Makefile.in newlib/libc/sys/linux/machine/i386/aclocal.m4 newlib/libc/sys/linux/machine/i386/atomic.h newlib/libc/sys/linux/machine/i386/configure newlib/libc/sys/linux/machine/i386/configure.in newlib/libc/sys/linux/machine/i386/crt0.c newlib/libc/sys/linux/machine/i386/dl-machine.h newlib/libc/sys/linux/machine/i386/dl-procinfo.c newlib/libc/sys/linux/machine/i386/dl-procinfo.h newlib/libc/sys/linux/machine/i386/get_clockfreq.c newlib/libc/sys/linux/machine/i386/getpagesize.c newlib/libc/sys/linux/machine/i386/hp-timing.c newlib/libc/sys/linux/machine/i386/hp-timing.h newlib/libc/sys/linux/machine/i386/huge_val.h newlib/libc/sys/linux/machine/i386/i386mach.h newlib/libc/sys/linux/machine/i386/include/endian.h newlib/libc/sys/linux/machine/i386/include/param.h newlib/libc/sys/linux/machine/i386/include/setjmp.h newlib/libc/sys/linux/machine/i386/include/termios.h newlib/libc/sys/linux/machine/i386/setjmp.S newlib/libc/sys/linux/machine/i386/sigaction.c newlib/libc/sys/linux/machine/i386/sigstack.h newlib/libc/sys/linux/machine/i386/socketcall.h newlib/libc/sys/linux/machine/i386/syscall.h newlib/libc/sys/linux/machine/i386/sysdep.h newlib/libc/sys/linux/machine/i386/weakalias.h newlib/libc/sys/linux/malign.c newlib/libc/sys/linux/malignr.c newlib/libc/sys/linux/mallinfor.c newlib/libc/sys/linux/malloc.c newlib/libc/sys/linux/mallocr.c newlib/libc/sys/linux/malloptr.c newlib/libc/sys/linux/mallstatsr.c newlib/libc/sys/linux/mcheck.c newlib/libc/sys/linux/mhooks.h newlib/libc/sys/linux/mmap.c newlib/libc/sys/linux/mntent.c newlib/libc/sys/linux/mntent_r.c newlib/libc/sys/linux/mq_close.c newlib/libc/sys/linux/mq_getattr.c newlib/libc/sys/linux/mq_notify.c newlib/libc/sys/linux/mq_open.c newlib/libc/sys/linux/mq_receive.c newlib/libc/sys/linux/mq_send.c newlib/libc/sys/linux/mq_setattr.c newlib/libc/sys/linux/mq_unlink.c newlib/libc/sys/linux/mqlocal.h newlib/libc/sys/linux/msize.c newlib/libc/sys/linux/msizer.c newlib/libc/sys/linux/mstats.c newlib/libc/sys/linux/mtrim.c newlib/libc/sys/linux/mtrimr.c newlib/libc/sys/linux/net/Makefile.am newlib/libc/sys/linux/net/Makefile.in newlib/libc/sys/linux/net/XXX-lookup.c newlib/libc/sys/linux/net/addr2ascii.c newlib/libc/sys/linux/net/alias-lookup.c newlib/libc/sys/linux/net/aliases.h newlib/libc/sys/linux/net/ascii2addr.c newlib/libc/sys/linux/net/base64.c newlib/libc/sys/linux/net/check_pf.c newlib/libc/sys/linux/net/databases.def newlib/libc/sys/linux/net/digits_dots.c newlib/libc/sys/linux/net/ether_aton.c newlib/libc/sys/linux/net/ether_aton_r.c newlib/libc/sys/linux/net/ether_hton.c newlib/libc/sys/linux/net/ether_line.c newlib/libc/sys/linux/net/ether_ntoa.c newlib/libc/sys/linux/net/ether_ntoa_r.c newlib/libc/sys/linux/net/ether_ntoh.c newlib/libc/sys/linux/net/etherent.h newlib/libc/sys/linux/net/ethers-lookup.c newlib/libc/sys/linux/net/function.def newlib/libc/sys/linux/net/getXXbyYY.c newlib/libc/sys/linux/net/getXXbyYY_r.c newlib/libc/sys/linux/net/getXXent.c newlib/libc/sys/linux/net/getXXent_r.c newlib/libc/sys/linux/net/getaddrinfo.c newlib/libc/sys/linux/net/getaliasent.c newlib/libc/sys/linux/net/getaliasent_r.c newlib/libc/sys/linux/net/getaliasname.c newlib/libc/sys/linux/net/getaliasname_r.c newlib/libc/sys/linux/net/gethstbyad.c newlib/libc/sys/linux/net/gethstbyad_r.c newlib/libc/sys/linux/net/gethstbynm.c newlib/libc/sys/linux/net/gethstbynm2.c newlib/libc/sys/linux/net/gethstbynm2_r.c newlib/libc/sys/linux/net/gethstbynm_r.c newlib/libc/sys/linux/net/gethstent.c newlib/libc/sys/linux/net/gethstent_r.c newlib/libc/sys/linux/net/getnameinfo.c newlib/libc/sys/linux/net/getnetbyad.c newlib/libc/sys/linux/net/getnetbyad_r.c newlib/libc/sys/linux/net/getnetbynm.c newlib/libc/sys/linux/net/getnetbynm_r.c newlib/libc/sys/linux/net/getnetent.c newlib/libc/sys/linux/net/getnetent_r.c newlib/libc/sys/linux/net/getnetgrent.c newlib/libc/sys/linux/net/getnetgrent_r.c newlib/libc/sys/linux/net/getnssent.c newlib/libc/sys/linux/net/getnssent_r.c newlib/libc/sys/linux/net/getproto.c newlib/libc/sys/linux/net/getproto_r.c newlib/libc/sys/linux/net/getprtent.c newlib/libc/sys/linux/net/getprtent_r.c newlib/libc/sys/linux/net/getprtname.c newlib/libc/sys/linux/net/getprtname_r.c newlib/libc/sys/linux/net/getrpcbyname.c newlib/libc/sys/linux/net/getrpcbyname_r.c newlib/libc/sys/linux/net/getrpcbynumber.c newlib/libc/sys/linux/net/getrpcbynumber_r.c newlib/libc/sys/linux/net/getrpcent.c newlib/libc/sys/linux/net/getrpcent_r.c newlib/libc/sys/linux/net/getservent.c newlib/libc/sys/linux/net/getservent_r.c newlib/libc/sys/linux/net/getsrvbynm.c newlib/libc/sys/linux/net/getsrvbynm_r.c newlib/libc/sys/linux/net/getsrvbypt.c newlib/libc/sys/linux/net/getsrvbypt_r.c newlib/libc/sys/linux/net/grp-lookup.c newlib/libc/sys/linux/net/herrno.c newlib/libc/sys/linux/net/hosts-lookup.c newlib/libc/sys/linux/net/ifaddrs.h newlib/libc/sys/linux/net/ifname.c newlib/libc/sys/linux/net/ifreq.c newlib/libc/sys/linux/net/ifreq.h newlib/libc/sys/linux/net/in6_addr.c newlib/libc/sys/linux/net/inet6_option.c newlib/libc/sys/linux/net/inet_addr.c newlib/libc/sys/linux/net/inet_lnaof.c newlib/libc/sys/linux/net/inet_mkadr.c newlib/libc/sys/linux/net/inet_net.c newlib/libc/sys/linux/net/inet_net_ntop.c newlib/libc/sys/linux/net/inet_net_pton.c newlib/libc/sys/linux/net/inet_neta.c newlib/libc/sys/linux/net/inet_netof.c newlib/libc/sys/linux/net/inet_ntoa.c newlib/libc/sys/linux/net/inet_ntop.c newlib/libc/sys/linux/net/inet_pton.c newlib/libc/sys/linux/net/issetugid-stub.c newlib/libc/sys/linux/net/key-lookup.c newlib/libc/sys/linux/net/local.h newlib/libc/sys/linux/net/netgroup.h newlib/libc/sys/linux/net/netgrp-lookup.c newlib/libc/sys/linux/net/network-lookup.c newlib/libc/sys/linux/net/not-cancel.h newlib/libc/sys/linux/net/ns_name.c newlib/libc/sys/linux/net/ns_netint.c newlib/libc/sys/linux/net/ns_parse.c newlib/libc/sys/linux/net/ns_print.c newlib/libc/sys/linux/net/ns_samedomain.c newlib/libc/sys/linux/net/ns_ttl.c newlib/libc/sys/linux/net/nsap_addr.c newlib/libc/sys/linux/net/nscd-types.h newlib/libc/sys/linux/net/nscd/nscd-client.h newlib/libc/sys/linux/net/nscd/nscd_proto.h newlib/libc/sys/linux/net/nss.h newlib/libc/sys/linux/net/nsswitch.c newlib/libc/sys/linux/net/nsswitch.h newlib/libc/sys/linux/net/opensock.c newlib/libc/sys/linux/net/proto-lookup.c newlib/libc/sys/linux/net/pwd-lookup.c newlib/libc/sys/linux/net/rcmd.c newlib/libc/sys/linux/net/rcmdsh.c newlib/libc/sys/linux/net/recv.c newlib/libc/sys/linux/net/res_comp.c newlib/libc/sys/linux/net/res_data.c newlib/libc/sys/linux/net/res_debug.c newlib/libc/sys/linux/net/res_debug.h newlib/libc/sys/linux/net/res_hconf.c newlib/libc/sys/linux/net/res_hconf.h newlib/libc/sys/linux/net/res_init.c newlib/libc/sys/linux/net/res_libc.c newlib/libc/sys/linux/net/res_mkquery.c newlib/libc/sys/linux/net/res_query.c newlib/libc/sys/linux/net/res_send.c newlib/libc/sys/linux/net/rexec.c newlib/libc/sys/linux/net/rpc-lookup.c newlib/libc/sys/linux/net/ruserpass.c newlib/libc/sys/linux/net/send.c newlib/libc/sys/linux/net/service-lookup.c newlib/libc/sys/linux/net/spwd-lookup.c newlib/libc/sys/linux/net/un-namespace.h newlib/libc/sys/linux/ntp_gettime.c newlib/libc/sys/linux/pathconf.c newlib/libc/sys/linux/pread.c newlib/libc/sys/linux/pread64.c newlib/libc/sys/linux/process.c newlib/libc/sys/linux/prof-freq.c newlib/libc/sys/linux/profile.c newlib/libc/sys/linux/psignal.c newlib/libc/sys/linux/pvallocr.c newlib/libc/sys/linux/pwrite.c newlib/libc/sys/linux/pwrite64.c newlib/libc/sys/linux/raise.c newlib/libc/sys/linux/readdir64.c newlib/libc/sys/linux/realloc.c newlib/libc/sys/linux/reallocr.c newlib/libc/sys/linux/realpath.c newlib/libc/sys/linux/rename.c newlib/libc/sys/linux/resource.c newlib/libc/sys/linux/scandir64.c newlib/libc/sys/linux/sched.c newlib/libc/sys/linux/select.c newlib/libc/sys/linux/seteuid.c newlib/libc/sys/linux/sethostid.c newlib/libc/sys/linux/sethostname.c newlib/libc/sys/linux/setrlimit64.c newlib/libc/sys/linux/shared.ld newlib/libc/sys/linux/shlib-compat.h newlib/libc/sys/linux/shm_open.c newlib/libc/sys/linux/shm_unlink.c newlib/libc/sys/linux/sig.c newlib/libc/sys/linux/sigaction.c newlib/libc/sys/linux/siglongjmp.c newlib/libc/sys/linux/signal.c newlib/libc/sys/linux/sigqueue.c newlib/libc/sys/linux/sigset.c newlib/libc/sys/linux/sigwait.c newlib/libc/sys/linux/sleep.c newlib/libc/sys/linux/socket.c newlib/libc/sys/linux/sockops.h newlib/libc/sys/linux/stack.c newlib/libc/sys/linux/statvfs.c newlib/libc/sys/linux/statvfs64.c newlib/libc/sys/linux/strsignal.c newlib/libc/sys/linux/strverscmp.c newlib/libc/sys/linux/sys/_types.h newlib/libc/sys/linux/sys/cdefs.h newlib/libc/sys/linux/sys/dirent.h newlib/libc/sys/linux/sys/dlfcn.h newlib/libc/sys/linux/sys/elfclass.h newlib/libc/sys/linux/sys/errno.h newlib/libc/sys/linux/sys/event.h newlib/libc/sys/linux/sys/fcntl.h newlib/libc/sys/linux/sys/features.h newlib/libc/sys/linux/sys/file.h newlib/libc/sys/linux/sys/ioccom.h newlib/libc/sys/linux/sys/ioctl.h newlib/libc/sys/linux/sys/libc-lock.h newlib/libc/sys/linux/sys/libc-tsd.h newlib/libc/sys/linux/sys/link.h newlib/libc/sys/linux/sys/linux_time.h newlib/libc/sys/linux/sys/lock.h newlib/libc/sys/linux/sys/param.h newlib/libc/sys/linux/sys/resource.h newlib/libc/sys/linux/sys/select.h newlib/libc/sys/linux/sys/signal.h newlib/libc/sys/linux/sys/socket.h newlib/libc/sys/linux/sys/sockio.h newlib/libc/sys/linux/sys/stat.h newlib/libc/sys/linux/sys/stdint.h newlib/libc/sys/linux/sys/stdio.h newlib/libc/sys/linux/sys/string.h newlib/libc/sys/linux/sys/termios.h newlib/libc/sys/linux/sys/time.h newlib/libc/sys/linux/sys/types.h newlib/libc/sys/linux/sys/unistd.h newlib/libc/sys/linux/sys/utime.h newlib/libc/sys/linux/sys/utmp.h newlib/libc/sys/linux/sys/utsname.h newlib/libc/sys/linux/sys/wait.h newlib/libc/sys/linux/sysconf.c newlib/libc/sys/linux/sysctl.c newlib/libc/sys/linux/systat.c newlib/libc/sys/linux/system.c newlib/libc/sys/linux/tcdrain.c newlib/libc/sys/linux/tcsendbrk.c newlib/libc/sys/linux/termios.c newlib/libc/sys/linux/thread-m.h newlib/libc/sys/linux/time.c newlib/libc/sys/linux/ttyname_r.c newlib/libc/sys/linux/usleep.c newlib/libc/sys/linux/utimes.c newlib/libc/sys/linux/vallocr.c newlib/libc/sys/linux/versionsort.c newlib/libc/sys/linux/versionsort64.c newlib/libc/sys/linux/wait.c newlib/libc/sys/m88kbug/Makefile.am newlib/libc/sys/m88kbug/Makefile.in newlib/libc/sys/m88kbug/aclocal.m4 newlib/libc/sys/m88kbug/configure newlib/libc/sys/m88kbug/configure.in newlib/libc/sys/m88kbug/crt0.c newlib/libc/sys/m88kbug/sys/systraps.h newlib/libc/sys/m88kbug/syscalls.c newlib/libc/sys/mmixware/Makefile.am newlib/libc/sys/mmixware/Makefile.in newlib/libc/sys/mmixware/_exit.c newlib/libc/sys/mmixware/access.c newlib/libc/sys/mmixware/aclocal.m4 newlib/libc/sys/mmixware/chmod.c newlib/libc/sys/mmixware/chown.c newlib/libc/sys/mmixware/close.c newlib/libc/sys/mmixware/configure newlib/libc/sys/mmixware/configure.in newlib/libc/sys/mmixware/creat.c newlib/libc/sys/mmixware/crt0.c newlib/libc/sys/mmixware/execv.c newlib/libc/sys/mmixware/execve.c newlib/libc/sys/mmixware/fork.c newlib/libc/sys/mmixware/fstat.c newlib/libc/sys/mmixware/getpid.c newlib/libc/sys/mmixware/gettime.c newlib/libc/sys/mmixware/isatty.c newlib/libc/sys/mmixware/kill.c newlib/libc/sys/mmixware/link.c newlib/libc/sys/mmixware/lseek.c newlib/libc/sys/mmixware/open.c newlib/libc/sys/mmixware/pipe.c newlib/libc/sys/mmixware/read.c newlib/libc/sys/mmixware/sbrk.c newlib/libc/sys/mmixware/setjmp.S newlib/libc/sys/mmixware/stat.c newlib/libc/sys/mmixware/sys/syscall.h newlib/libc/sys/mmixware/time.c newlib/libc/sys/mmixware/times.c newlib/libc/sys/mmixware/unlink.c newlib/libc/sys/mmixware/utime.c newlib/libc/sys/mmixware/wait.c newlib/libc/sys/mmixware/write.c newlib/libc/sys/netware/Makefile.am newlib/libc/sys/netware/Makefile.in newlib/libc/sys/netware/aclocal.m4 newlib/libc/sys/netware/configure newlib/libc/sys/netware/configure.in newlib/libc/sys/netware/crt0.c newlib/libc/sys/netware/getpid.c newlib/libc/sys/netware/link.c newlib/libc/sys/rdos/Makefile.am newlib/libc/sys/rdos/Makefile.in newlib/libc/sys/rdos/aclocal.m4 newlib/libc/sys/rdos/chown.c newlib/libc/sys/rdos/close.c newlib/libc/sys/rdos/config.h newlib/libc/sys/rdos/configure newlib/libc/sys/rdos/configure.in newlib/libc/sys/rdos/crt0.S newlib/libc/sys/rdos/execve.c newlib/libc/sys/rdos/fork.c newlib/libc/sys/rdos/fstat.c newlib/libc/sys/rdos/getenv.c newlib/libc/sys/rdos/getpid.c newlib/libc/sys/rdos/gettod.c newlib/libc/sys/rdos/isatty.c newlib/libc/sys/rdos/kill.c newlib/libc/sys/rdos/link.c newlib/libc/sys/rdos/lseek.c newlib/libc/sys/rdos/open.c newlib/libc/sys/rdos/rdos.S newlib/libc/sys/rdos/rdos.h newlib/libc/sys/rdos/rdoshelp.c newlib/libc/sys/rdos/read.c newlib/libc/sys/rdos/readlink.c newlib/libc/sys/rdos/sbrk.c newlib/libc/sys/rdos/stat.c newlib/libc/sys/rdos/symlink.c newlib/libc/sys/rdos/times.c newlib/libc/sys/rdos/unlink.c newlib/libc/sys/rdos/user.def newlib/libc/sys/rdos/wait.c newlib/libc/sys/rdos/write.c newlib/libc/sys/rtems/Makefile.am newlib/libc/sys/rtems/Makefile.in newlib/libc/sys/rtems/aclocal.m4 newlib/libc/sys/rtems/configure newlib/libc/sys/rtems/configure.in newlib/libc/sys/rtems/crt0.c newlib/libc/sys/rtems/dummysys.c newlib/libc/sys/rtems/include/limits.h newlib/libc/sys/rtems/machine/limits.h newlib/libc/sys/rtems/machine/param.h newlib/libc/sys/rtems/sys/dirent.h newlib/libc/sys/rtems/sys/param.h newlib/libc/sys/rtems/sys/queue.h newlib/libc/sys/rtems/sys/syslimits.h newlib/libc/sys/rtems/sys/utime.h newlib/libc/sys/sh/Makefile.am newlib/libc/sys/sh/Makefile.in newlib/libc/sys/sh/aclocal.m4 newlib/libc/sys/sh/configure newlib/libc/sys/sh/configure.in newlib/libc/sys/sh/creat.c newlib/libc/sys/sh/crt0.S newlib/libc/sys/sh/ftruncate.c newlib/libc/sys/sh/sys/syscall.h newlib/libc/sys/sh/syscalls.c newlib/libc/sys/sh/trap.S newlib/libc/sys/sh/truncate.c newlib/libc/sys/sparc64/Makefile.am newlib/libc/sys/sparc64/Makefile.in newlib/libc/sys/sparc64/_exit.S newlib/libc/sys/sparc64/_main.c newlib/libc/sys/sparc64/aclocal.m4 newlib/libc/sys/sparc64/cerror.S newlib/libc/sys/sparc64/closedir.c newlib/libc/sys/sparc64/configure newlib/libc/sys/sparc64/configure.in newlib/libc/sys/sparc64/creat.c newlib/libc/sys/sparc64/crt0.S newlib/libc/sys/sparc64/dup2.S newlib/libc/sys/sparc64/execve.S newlib/libc/sys/sparc64/ieee.c newlib/libc/sys/sparc64/isatty.c newlib/libc/sys/sparc64/lstat.S newlib/libc/sys/sparc64/opendir.c newlib/libc/sys/sparc64/readdir.c newlib/libc/sys/sparc64/rewinddir.c newlib/libc/sys/sparc64/sbrk.S newlib/libc/sys/sparc64/scandir.c newlib/libc/sys/sparc64/seekdir.c newlib/libc/sys/sparc64/sigsetjmp.S newlib/libc/sys/sparc64/stat.S newlib/libc/sys/sparc64/sys/dirent.h newlib/libc/sys/sparc64/sys/fcntl.h newlib/libc/sys/sparc64/sys/file.h newlib/libc/sys/sparc64/sys/stat.h newlib/libc/sys/sparc64/sys/syscall.h newlib/libc/sys/sparc64/sys/syscallasm.h newlib/libc/sys/sparc64/sys/termios.h newlib/libc/sys/sparc64/sys/time.h newlib/libc/sys/sparc64/sys/utime.h newlib/libc/sys/sparc64/sys/utmp.h newlib/libc/sys/sparc64/sys/wait.h newlib/libc/sys/sparc64/telldir.c newlib/libc/sys/sparc64/template.S newlib/libc/sys/sparc64/template_r.S newlib/libc/sys/sparc64/utime.S newlib/libc/sys/sparc64/utime2.c newlib/libc/sys/sparc64/wait.S newlib/libc/sys/sun4/Makefile.am newlib/libc/sys/sun4/Makefile.in newlib/libc/sys/sun4/_main.c newlib/libc/sys/sun4/aclocal.m4 newlib/libc/sys/sun4/configure newlib/libc/sys/sun4/configure.in newlib/libc/sys/sun4/ieee.c newlib/libc/sys/sun4/sys/dirent.h newlib/libc/sys/sun4/sys/file.h newlib/libc/sys/sun4/sys/termios.h newlib/libc/sys/sun4/sys/utime.h newlib/libc/sys/sun4/sys/utmp.h newlib/libc/sys/sun4/sys/wait.h newlib/libc/sys/sysmec/Makefile.am newlib/libc/sys/sysmec/Makefile.in newlib/libc/sys/sysmec/_exit.c newlib/libc/sys/sysmec/access.c newlib/libc/sys/sysmec/aclocal.m4 newlib/libc/sys/sysmec/chmod.c newlib/libc/sys/sysmec/chown.c newlib/libc/sys/sysmec/close.c newlib/libc/sys/sysmec/configure newlib/libc/sys/sysmec/configure.in newlib/libc/sys/sysmec/creat.c newlib/libc/sys/sysmec/crt0.S newlib/libc/sys/sysmec/crt1.c newlib/libc/sys/sysmec/execv.c newlib/libc/sys/sysmec/execve.c newlib/libc/sys/sysmec/fork.c newlib/libc/sys/sysmec/fstat.c newlib/libc/sys/sysmec/getpid.c newlib/libc/sys/sysmec/gettime.c newlib/libc/sys/sysmec/isatty.c newlib/libc/sys/sysmec/kill.c newlib/libc/sys/sysmec/lseek.c newlib/libc/sys/sysmec/open.c newlib/libc/sys/sysmec/pipe.c newlib/libc/sys/sysmec/read.c newlib/libc/sys/sysmec/sbrk.c newlib/libc/sys/sysmec/stat.c newlib/libc/sys/sysmec/sys/syscall.h newlib/libc/sys/sysmec/time.c newlib/libc/sys/sysmec/times.c newlib/libc/sys/sysmec/trap.S newlib/libc/sys/sysmec/unlink.c newlib/libc/sys/sysmec/utime.c newlib/libc/sys/sysmec/wait.c newlib/libc/sys/sysmec/write.c newlib/libc/sys/sysnec810/Makefile.am newlib/libc/sys/sysnec810/Makefile.in newlib/libc/sys/sysnec810/aclocal.m4 newlib/libc/sys/sysnec810/configure newlib/libc/sys/sysnec810/configure.in newlib/libc/sys/sysnec810/crt0.S newlib/libc/sys/sysnec810/io.S newlib/libc/sys/sysnec810/misc.c newlib/libc/sys/sysnec810/sbrk.c newlib/libc/sys/sysnec810/write.c newlib/libc/sys/sysnecv850/Makefile.am newlib/libc/sys/sysnecv850/Makefile.in newlib/libc/sys/sysnecv850/_exit.c newlib/libc/sys/sysnecv850/access.c newlib/libc/sys/sysnecv850/aclocal.m4 newlib/libc/sys/sysnecv850/chmod.c newlib/libc/sys/sysnecv850/chown.c newlib/libc/sys/sysnecv850/close.c newlib/libc/sys/sysnecv850/configure newlib/libc/sys/sysnecv850/configure.in newlib/libc/sys/sysnecv850/creat.c newlib/libc/sys/sysnecv850/crt0.S newlib/libc/sys/sysnecv850/crt1.c newlib/libc/sys/sysnecv850/execv.c newlib/libc/sys/sysnecv850/execve.c newlib/libc/sys/sysnecv850/fork.c newlib/libc/sys/sysnecv850/fstat.c newlib/libc/sys/sysnecv850/getpid.c newlib/libc/sys/sysnecv850/gettime.c newlib/libc/sys/sysnecv850/isatty.c newlib/libc/sys/sysnecv850/kill.c newlib/libc/sys/sysnecv850/link.c newlib/libc/sys/sysnecv850/lseek.c newlib/libc/sys/sysnecv850/open.c newlib/libc/sys/sysnecv850/pipe.c newlib/libc/sys/sysnecv850/read.c newlib/libc/sys/sysnecv850/sbrk.c newlib/libc/sys/sysnecv850/stat.c newlib/libc/sys/sysnecv850/sys/syscall.h newlib/libc/sys/sysnecv850/time.c newlib/libc/sys/sysnecv850/times.c newlib/libc/sys/sysnecv850/trap.S newlib/libc/sys/sysnecv850/unlink.c newlib/libc/sys/sysnecv850/utime.c newlib/libc/sys/sysnecv850/wait.c newlib/libc/sys/sysnecv850/write.c newlib/libc/sys/sysvi386/Makefile.am newlib/libc/sys/sysvi386/Makefile.in newlib/libc/sys/sysvi386/_exit.S newlib/libc/sys/sysvi386/_longjmp.S newlib/libc/sys/sysvi386/_setjmp.S newlib/libc/sys/sysvi386/access.S newlib/libc/sys/sysvi386/aclocal.m4 newlib/libc/sys/sysvi386/alarm.S newlib/libc/sys/sysvi386/brk.S newlib/libc/sys/sysvi386/cerror.S newlib/libc/sys/sysvi386/chdir.S newlib/libc/sys/sysvi386/chmod.S newlib/libc/sys/sysvi386/close.S newlib/libc/sys/sysvi386/closedir.c newlib/libc/sys/sysvi386/configure newlib/libc/sys/sysvi386/configure.in newlib/libc/sys/sysvi386/crt0.c newlib/libc/sys/sysvi386/dup.c newlib/libc/sys/sysvi386/dup2.c newlib/libc/sys/sysvi386/exec.c newlib/libc/sys/sysvi386/execve.S newlib/libc/sys/sysvi386/fcntl.S newlib/libc/sys/sysvi386/fork.S newlib/libc/sys/sysvi386/fpathconf.S newlib/libc/sys/sysvi386/fps.S newlib/libc/sys/sysvi386/fpx.c newlib/libc/sys/sysvi386/fstat.S newlib/libc/sys/sysvi386/getdents.S newlib/libc/sys/sysvi386/getegid.S newlib/libc/sys/sysvi386/geteuid.S newlib/libc/sys/sysvi386/getgid.S newlib/libc/sys/sysvi386/getgroups.S newlib/libc/sys/sysvi386/getpid.S newlib/libc/sys/sysvi386/getuid.S newlib/libc/sys/sysvi386/ioctl.S newlib/libc/sys/sysvi386/isatty.c newlib/libc/sys/sysvi386/kill.S newlib/libc/sys/sysvi386/link.S newlib/libc/sys/sysvi386/lseek.S newlib/libc/sys/sysvi386/mkdir.S newlib/libc/sys/sysvi386/open.S newlib/libc/sys/sysvi386/opendir.c newlib/libc/sys/sysvi386/pathconf.S newlib/libc/sys/sysvi386/pause.S newlib/libc/sys/sysvi386/pipe.S newlib/libc/sys/sysvi386/read.S newlib/libc/sys/sysvi386/readdir.c newlib/libc/sys/sysvi386/rename.S newlib/libc/sys/sysvi386/rewinddir.c newlib/libc/sys/sysvi386/rmdir.S newlib/libc/sys/sysvi386/sbrk.c newlib/libc/sys/sysvi386/scandir.c newlib/libc/sys/sysvi386/seekdir.c newlib/libc/sys/sysvi386/setgid.S newlib/libc/sys/sysvi386/setuid.S newlib/libc/sys/sysvi386/sigaction.S newlib/libc/sys/sysvi386/signal.S newlib/libc/sys/sysvi386/sigprocmask.S newlib/libc/sys/sysvi386/sleep.c newlib/libc/sys/sysvi386/speed.c newlib/libc/sys/sysvi386/stat.S newlib/libc/sys/sysvi386/sys/dirent.h newlib/libc/sys/sysvi386/sys/setjmp.h newlib/libc/sys/sysvi386/sys/termio.h newlib/libc/sys/sysvi386/sys/termios.h newlib/libc/sys/sysvi386/sys/utime.h newlib/libc/sys/sysvi386/sys/utmp.h newlib/libc/sys/sysvi386/sys/wait.h newlib/libc/sys/sysvi386/sysconf.S newlib/libc/sys/sysvi386/tcgetattr.c newlib/libc/sys/sysvi386/tcline.c newlib/libc/sys/sysvi386/tcsetattr.c newlib/libc/sys/sysvi386/telldir.c newlib/libc/sys/sysvi386/time.S newlib/libc/sys/sysvi386/times.S newlib/libc/sys/sysvi386/unlink.S newlib/libc/sys/sysvi386/utime.S newlib/libc/sys/sysvi386/wait.S newlib/libc/sys/sysvi386/waitpid.S newlib/libc/sys/sysvi386/write.S newlib/libc/sys/sysvnecv70/Makefile.am newlib/libc/sys/sysvnecv70/Makefile.in newlib/libc/sys/sysvnecv70/aclocal.m4 newlib/libc/sys/sysvnecv70/cerror.S newlib/libc/sys/sysvnecv70/close.S newlib/libc/sys/sysvnecv70/configure newlib/libc/sys/sysvnecv70/configure.in newlib/libc/sys/sysvnecv70/crt0.S newlib/libc/sys/sysvnecv70/exit.S newlib/libc/sys/sysvnecv70/fps.S newlib/libc/sys/sysvnecv70/fpx.c newlib/libc/sys/sysvnecv70/fstat.S newlib/libc/sys/sysvnecv70/ioctl.S newlib/libc/sys/sysvnecv70/isatty.S newlib/libc/sys/sysvnecv70/lseek.S newlib/libc/sys/sysvnecv70/open.S newlib/libc/sys/sysvnecv70/read.S newlib/libc/sys/sysvnecv70/sbrk.S newlib/libc/sys/sysvnecv70/sysv60.S newlib/libc/sys/sysvnecv70/sysvnecv70.tex newlib/libc/sys/sysvnecv70/write.S newlib/libc/sys/tic80/Makefile.am newlib/libc/sys/tic80/Makefile.in newlib/libc/sys/tic80/aclocal.m4 newlib/libc/sys/tic80/configure newlib/libc/sys/tic80/configure.in newlib/libc/sys/tic80/crt0.c newlib/libc/sys/w65/Makefile.am newlib/libc/sys/w65/Makefile.in newlib/libc/sys/w65/aclocal.m4 newlib/libc/sys/w65/configure newlib/libc/sys/w65/configure.in newlib/libc/sys/w65/crt0.c newlib/libc/sys/w65/sys/syscall.h newlib/libc/sys/w65/syscalls.c newlib/libc/sys/w65/trap.c newlib/libc/sys/z8ksim/Makefile.am newlib/libc/sys/z8ksim/Makefile.in newlib/libc/sys/z8ksim/aclocal.m4 newlib/libc/sys/z8ksim/configure newlib/libc/sys/z8ksim/configure.in newlib/libc/sys/z8ksim/crt0.c newlib/libc/sys/z8ksim/glue.c newlib/libc/sys/z8ksim/sys/syscall.h newlib/libc/syscalls/Makefile.am newlib/libc/syscalls/Makefile.in newlib/libc/syscalls/sysclose.c newlib/libc/syscalls/sysexecve.c newlib/libc/syscalls/sysfcntl.c newlib/libc/syscalls/sysfork.c newlib/libc/syscalls/sysfstat.c newlib/libc/syscalls/sysgetpid.c newlib/libc/syscalls/sysgettod.c newlib/libc/syscalls/sysisatty.c newlib/libc/syscalls/syskill.c newlib/libc/syscalls/syslink.c newlib/libc/syscalls/syslseek.c newlib/libc/syscalls/sysopen.c newlib/libc/syscalls/sysread.c newlib/libc/syscalls/syssbrk.c newlib/libc/syscalls/sysstat.c newlib/libc/syscalls/systimes.c newlib/libc/syscalls/sysunlink.c newlib/libc/syscalls/syswait.c newlib/libc/syscalls/syswrite.c newlib/libc/time/Makefile.am newlib/libc/time/Makefile.in newlib/libc/time/asctime.c newlib/libc/time/asctime_r.c newlib/libc/time/clock.c newlib/libc/time/ctime.c newlib/libc/time/ctime_r.c newlib/libc/time/difftime.c newlib/libc/time/gettzinfo.c newlib/libc/time/gmtime.c newlib/libc/time/gmtime_r.c newlib/libc/time/lcltime.c newlib/libc/time/lcltime_r.c newlib/libc/time/local.h newlib/libc/time/mktime.c newlib/libc/time/mktm_r.c newlib/libc/time/strftime.c newlib/libc/time/strptime.c newlib/libc/time/time.c newlib/libc/time/time.tex newlib/libc/time/tzlock.c newlib/libc/time/tzset.c newlib/libc/time/tzset_r.c newlib/libc/time/tzvars.c newlib/libc/unix/Makefile.am newlib/libc/unix/Makefile.in newlib/libc/unix/basename.c newlib/libc/unix/dirname.c newlib/libc/unix/getcwd.c newlib/libc/unix/getlogin.c newlib/libc/unix/getpass.c newlib/libc/unix/getpwent.c newlib/libc/unix/getut.c newlib/libc/unix/pread.c newlib/libc/unix/pwrite.c newlib/libc/unix/sigset.c newlib/libc/unix/ttyname.c newlib/libm/Makefile.am newlib/libm/Makefile.in newlib/libm/aclocal.m4 newlib/libm/common/Makefile.am newlib/libm/common/Makefile.in newlib/libm/common/fdlibm.h newlib/libm/common/s_cbrt.c newlib/libm/common/s_copysign.c newlib/libm/common/s_exp10.c newlib/libm/common/s_expm1.c newlib/libm/common/s_fdim.c newlib/libm/common/s_finite.c newlib/libm/common/s_fma.c newlib/libm/common/s_fmax.c newlib/libm/common/s_fmin.c newlib/libm/common/s_fpclassify.c newlib/libm/common/s_ilogb.c newlib/libm/common/s_infconst.c newlib/libm/common/s_infinity.c newlib/libm/common/s_isinf.c newlib/libm/common/s_isinfd.c newlib/libm/common/s_isnan.c newlib/libm/common/s_isnand.c newlib/libm/common/s_lib_ver.c newlib/libm/common/s_log1p.c newlib/libm/common/s_logb.c newlib/libm/common/s_lrint.c newlib/libm/common/s_lround.c newlib/libm/common/s_matherr.c newlib/libm/common/s_modf.c newlib/libm/common/s_nan.c newlib/libm/common/s_nearbyint.c newlib/libm/common/s_nextafter.c newlib/libm/common/s_pow10.c newlib/libm/common/s_remquo.c newlib/libm/common/s_rint.c newlib/libm/common/s_round.c newlib/libm/common/s_scalbln.c newlib/libm/common/s_scalbn.c newlib/libm/common/s_signbit.c newlib/libm/common/s_trunc.c newlib/libm/common/sf_cbrt.c newlib/libm/common/sf_copysign.c newlib/libm/common/sf_exp10.c newlib/libm/common/sf_expm1.c newlib/libm/common/sf_fdim.c newlib/libm/common/sf_finite.c newlib/libm/common/sf_fma.c newlib/libm/common/sf_fmax.c newlib/libm/common/sf_fmin.c newlib/libm/common/sf_fpclassify.c newlib/libm/common/sf_ilogb.c newlib/libm/common/sf_infinity.c newlib/libm/common/sf_isinf.c newlib/libm/common/sf_isinff.c newlib/libm/common/sf_isnan.c newlib/libm/common/sf_isnanf.c newlib/libm/common/sf_log1p.c newlib/libm/common/sf_logb.c newlib/libm/common/sf_lrint.c newlib/libm/common/sf_lround.c newlib/libm/common/sf_modf.c newlib/libm/common/sf_nan.c newlib/libm/common/sf_nearbyint.c newlib/libm/common/sf_nextafter.c newlib/libm/common/sf_pow10.c newlib/libm/common/sf_remquo.c newlib/libm/common/sf_rint.c newlib/libm/common/sf_round.c newlib/libm/common/sf_scalbln.c newlib/libm/common/sf_scalbn.c newlib/libm/common/sf_trunc.c newlib/libm/config.h.in newlib/libm/configure newlib/libm/configure.in newlib/libm/libm.texinfo newlib/libm/machine/Makefile.am newlib/libm/machine/Makefile.in newlib/libm/machine/aclocal.m4 newlib/libm/machine/configure newlib/libm/machine/configure.in newlib/libm/machine/i386/Makefile.am newlib/libm/machine/i386/Makefile.in newlib/libm/machine/i386/aclocal.m4 newlib/libm/machine/i386/configure newlib/libm/machine/i386/configure.in newlib/libm/machine/i386/f_atan2.S newlib/libm/machine/i386/f_atan2f.S newlib/libm/machine/i386/f_exp.c newlib/libm/machine/i386/f_expf.c newlib/libm/machine/i386/f_frexp.S newlib/libm/machine/i386/f_frexpf.S newlib/libm/machine/i386/f_ldexp.S newlib/libm/machine/i386/f_ldexpf.S newlib/libm/machine/i386/f_llrint.c newlib/libm/machine/i386/f_llrintf.c newlib/libm/machine/i386/f_llrintl.c newlib/libm/machine/i386/f_log.S newlib/libm/machine/i386/f_log10.S newlib/libm/machine/i386/f_log10f.S newlib/libm/machine/i386/f_logf.S newlib/libm/machine/i386/f_lrint.c newlib/libm/machine/i386/f_lrintf.c newlib/libm/machine/i386/f_lrintl.c newlib/libm/machine/i386/f_math.h newlib/libm/machine/i386/f_pow.c newlib/libm/machine/i386/f_powf.c newlib/libm/machine/i386/f_rint.c newlib/libm/machine/i386/f_rintf.c newlib/libm/machine/i386/f_rintl.c newlib/libm/machine/i386/f_tan.S newlib/libm/machine/i386/f_tanf.S newlib/libm/machine/i386/i386mach.h newlib/libm/machine/spu/Makefile.am newlib/libm/machine/spu/Makefile.in newlib/libm/machine/spu/aclocal.m4 newlib/libm/machine/spu/configure newlib/libm/machine/spu/configure.in newlib/libm/machine/spu/fe_dfl_env.c newlib/libm/machine/spu/feclearexcept.c newlib/libm/machine/spu/fegetenv.c newlib/libm/machine/spu/fegetexceptflag.c newlib/libm/machine/spu/fegetround.c newlib/libm/machine/spu/feholdexcept.c newlib/libm/machine/spu/feraiseexcept.c newlib/libm/machine/spu/fesetenv.c newlib/libm/machine/spu/fesetexceptflag.c newlib/libm/machine/spu/fesetround.c newlib/libm/machine/spu/fetestexcept.c newlib/libm/machine/spu/feupdateenv.c newlib/libm/machine/spu/headers/acos.h newlib/libm/machine/spu/headers/acosd2.h newlib/libm/machine/spu/headers/acosf.h newlib/libm/machine/spu/headers/acosf4.h newlib/libm/machine/spu/headers/acosh.h newlib/libm/machine/spu/headers/acoshd2.h newlib/libm/machine/spu/headers/acoshf.h newlib/libm/machine/spu/headers/acoshf4.h newlib/libm/machine/spu/headers/asin.h newlib/libm/machine/spu/headers/asind2.h newlib/libm/machine/spu/headers/asinf.h newlib/libm/machine/spu/headers/asinf4.h newlib/libm/machine/spu/headers/asinh.h newlib/libm/machine/spu/headers/asinhd2.h newlib/libm/machine/spu/headers/asinhf.h newlib/libm/machine/spu/headers/asinhf4.h newlib/libm/machine/spu/headers/atan.h newlib/libm/machine/spu/headers/atan2.h newlib/libm/machine/spu/headers/atan2d2.h newlib/libm/machine/spu/headers/atan2f.h newlib/libm/machine/spu/headers/atan2f4.h newlib/libm/machine/spu/headers/atand2.h newlib/libm/machine/spu/headers/atanf.h newlib/libm/machine/spu/headers/atanf4.h newlib/libm/machine/spu/headers/atanh.h newlib/libm/machine/spu/headers/atanhd2.h newlib/libm/machine/spu/headers/atanhf.h newlib/libm/machine/spu/headers/atanhf4.h newlib/libm/machine/spu/headers/cbrt.h newlib/libm/machine/spu/headers/cbrtf.h newlib/libm/machine/spu/headers/ceil.h newlib/libm/machine/spu/headers/ceilf.h newlib/libm/machine/spu/headers/copysign.h newlib/libm/machine/spu/headers/copysignf.h newlib/libm/machine/spu/headers/cos.h newlib/libm/machine/spu/headers/cos_sin.h newlib/libm/machine/spu/headers/cosd2.h newlib/libm/machine/spu/headers/cosf.h newlib/libm/machine/spu/headers/cosf4.h newlib/libm/machine/spu/headers/cosh.h newlib/libm/machine/spu/headers/coshd2.h newlib/libm/machine/spu/headers/coshf.h newlib/libm/machine/spu/headers/coshf4.h newlib/libm/machine/spu/headers/divd2.h newlib/libm/machine/spu/headers/divf4.h newlib/libm/machine/spu/headers/dom_chkd_less_than.h newlib/libm/machine/spu/headers/dom_chkd_negone_one.h newlib/libm/machine/spu/headers/dom_chkf_less_than.h newlib/libm/machine/spu/headers/dom_chkf_negone_one.h newlib/libm/machine/spu/headers/erf.h newlib/libm/machine/spu/headers/erf_utils.h newlib/libm/machine/spu/headers/erfc.h newlib/libm/machine/spu/headers/erfcd2.h newlib/libm/machine/spu/headers/erfcf.h newlib/libm/machine/spu/headers/erfcf4.h newlib/libm/machine/spu/headers/erfd2.h newlib/libm/machine/spu/headers/erff.h newlib/libm/machine/spu/headers/erff4.h newlib/libm/machine/spu/headers/exp.h newlib/libm/machine/spu/headers/exp2.h newlib/libm/machine/spu/headers/exp2d2.h newlib/libm/machine/spu/headers/exp2f.h newlib/libm/machine/spu/headers/exp2f4.h newlib/libm/machine/spu/headers/expd2.h newlib/libm/machine/spu/headers/expf.h newlib/libm/machine/spu/headers/expf4.h newlib/libm/machine/spu/headers/expm1.h newlib/libm/machine/spu/headers/expm1d2.h newlib/libm/machine/spu/headers/expm1f.h newlib/libm/machine/spu/headers/expm1f4.h newlib/libm/machine/spu/headers/fabs.h newlib/libm/machine/spu/headers/fabsf.h newlib/libm/machine/spu/headers/fdim.h newlib/libm/machine/spu/headers/fdimf.h newlib/libm/machine/spu/headers/feclearexcept.h newlib/libm/machine/spu/headers/fefpscr.h newlib/libm/machine/spu/headers/fegetenv.h newlib/libm/machine/spu/headers/fegetexceptflag.h newlib/libm/machine/spu/headers/fegetround.h newlib/libm/machine/spu/headers/feholdexcept.h newlib/libm/machine/spu/headers/feraiseexcept.h newlib/libm/machine/spu/headers/fesetenv.h newlib/libm/machine/spu/headers/fesetexceptflag.h newlib/libm/machine/spu/headers/fesetround.h newlib/libm/machine/spu/headers/fetestexcept.h newlib/libm/machine/spu/headers/feupdateenv.h newlib/libm/machine/spu/headers/floor.h newlib/libm/machine/spu/headers/floord2.h newlib/libm/machine/spu/headers/floorf.h newlib/libm/machine/spu/headers/floorf4.h newlib/libm/machine/spu/headers/fma.h newlib/libm/machine/spu/headers/fmaf.h newlib/libm/machine/spu/headers/fmax.h newlib/libm/machine/spu/headers/fmaxf.h newlib/libm/machine/spu/headers/fmin.h newlib/libm/machine/spu/headers/fminf.h newlib/libm/machine/spu/headers/fmod.h newlib/libm/machine/spu/headers/fmodf.h newlib/libm/machine/spu/headers/frexp.h newlib/libm/machine/spu/headers/frexpf.h newlib/libm/machine/spu/headers/hypot.h newlib/libm/machine/spu/headers/hypotd2.h newlib/libm/machine/spu/headers/hypotf.h newlib/libm/machine/spu/headers/hypotf4.h newlib/libm/machine/spu/headers/ilogb.h newlib/libm/machine/spu/headers/ilogbf.h newlib/libm/machine/spu/headers/isnan.h newlib/libm/machine/spu/headers/isnand2.h newlib/libm/machine/spu/headers/isnanf.h newlib/libm/machine/spu/headers/isnanf4.h newlib/libm/machine/spu/headers/ldexp.h newlib/libm/machine/spu/headers/ldexpd2.h newlib/libm/machine/spu/headers/ldexpf.h newlib/libm/machine/spu/headers/ldexpf4.h newlib/libm/machine/spu/headers/lgamma.h newlib/libm/machine/spu/headers/lgammad2.h newlib/libm/machine/spu/headers/lgammaf.h newlib/libm/machine/spu/headers/lgammaf4.h newlib/libm/machine/spu/headers/llrint.h newlib/libm/machine/spu/headers/llrintf.h newlib/libm/machine/spu/headers/llround.h newlib/libm/machine/spu/headers/llroundf.h newlib/libm/machine/spu/headers/log.h newlib/libm/machine/spu/headers/log10.h newlib/libm/machine/spu/headers/log10d2.h newlib/libm/machine/spu/headers/log10f.h newlib/libm/machine/spu/headers/log1p.h newlib/libm/machine/spu/headers/log1pd2.h newlib/libm/machine/spu/headers/log1pf.h newlib/libm/machine/spu/headers/log1pf4.h newlib/libm/machine/spu/headers/log2.h newlib/libm/machine/spu/headers/log2d2.h newlib/libm/machine/spu/headers/log2f.h newlib/libm/machine/spu/headers/log2f4.h newlib/libm/machine/spu/headers/logbf.h newlib/libm/machine/spu/headers/logbf4.h newlib/libm/machine/spu/headers/logd2.h newlib/libm/machine/spu/headers/logf.h newlib/libm/machine/spu/headers/logf4.h newlib/libm/machine/spu/headers/lrint.h newlib/libm/machine/spu/headers/lrintf.h newlib/libm/machine/spu/headers/lround.h newlib/libm/machine/spu/headers/lroundf.h newlib/libm/machine/spu/headers/nearbyint.h newlib/libm/machine/spu/headers/nearbyintf.h newlib/libm/machine/spu/headers/nearbyintf4.h newlib/libm/machine/spu/headers/nextafter.h newlib/libm/machine/spu/headers/nextafterd2.h newlib/libm/machine/spu/headers/nextafterf.h newlib/libm/machine/spu/headers/nextafterf4.h newlib/libm/machine/spu/headers/pow.h newlib/libm/machine/spu/headers/powd2.h newlib/libm/machine/spu/headers/powf.h newlib/libm/machine/spu/headers/powf4.h newlib/libm/machine/spu/headers/recipd2.h newlib/libm/machine/spu/headers/recipf4.h newlib/libm/machine/spu/headers/remainder.h newlib/libm/machine/spu/headers/remainderf.h newlib/libm/machine/spu/headers/remquo.h newlib/libm/machine/spu/headers/remquof.h newlib/libm/machine/spu/headers/rint.h newlib/libm/machine/spu/headers/rintf.h newlib/libm/machine/spu/headers/rintf4.h newlib/libm/machine/spu/headers/round.h newlib/libm/machine/spu/headers/roundf.h newlib/libm/machine/spu/headers/scalbn.h newlib/libm/machine/spu/headers/scalbnf.h newlib/libm/machine/spu/headers/scalbnf4.h newlib/libm/machine/spu/headers/signbit.h newlib/libm/machine/spu/headers/signbitd2.h newlib/libm/machine/spu/headers/simdmath.h newlib/libm/machine/spu/headers/sin.h newlib/libm/machine/spu/headers/sincos.h newlib/libm/machine/spu/headers/sincosd2.h newlib/libm/machine/spu/headers/sincosf.h newlib/libm/machine/spu/headers/sincosf4.h newlib/libm/machine/spu/headers/sind2.h newlib/libm/machine/spu/headers/sinf.h newlib/libm/machine/spu/headers/sinf4.h newlib/libm/machine/spu/headers/sinh.h newlib/libm/machine/spu/headers/sinhd2.h newlib/libm/machine/spu/headers/sinhf.h newlib/libm/machine/spu/headers/sinhf4.h newlib/libm/machine/spu/headers/sqrt.h newlib/libm/machine/spu/headers/sqrtd2.h newlib/libm/machine/spu/headers/sqrtf.h newlib/libm/machine/spu/headers/sqrtf4.h newlib/libm/machine/spu/headers/tan.h newlib/libm/machine/spu/headers/tand2.h newlib/libm/machine/spu/headers/tanf.h newlib/libm/machine/spu/headers/tanf4.h newlib/libm/machine/spu/headers/tanh.h newlib/libm/machine/spu/headers/tanhd2.h newlib/libm/machine/spu/headers/tanhf.h newlib/libm/machine/spu/headers/tanhf4.h newlib/libm/machine/spu/headers/tgamma.h newlib/libm/machine/spu/headers/tgammad2.h newlib/libm/machine/spu/headers/tgammaf.h newlib/libm/machine/spu/headers/tgammaf4.h newlib/libm/machine/spu/headers/trunc.h newlib/libm/machine/spu/headers/truncd2.h newlib/libm/machine/spu/headers/truncf.h newlib/libm/machine/spu/headers/truncf4.h newlib/libm/machine/spu/headers/vec_literal.h newlib/libm/machine/spu/llrint.c newlib/libm/machine/spu/llrintf.c newlib/libm/machine/spu/llround.c newlib/libm/machine/spu/llroundf.c newlib/libm/machine/spu/log2.c newlib/libm/machine/spu/log2f.c newlib/libm/machine/spu/s_asinh.c newlib/libm/machine/spu/s_atan.c newlib/libm/machine/spu/s_cbrt.c newlib/libm/machine/spu/s_ceil.c newlib/libm/machine/spu/s_copysign.c newlib/libm/machine/spu/s_cos.c newlib/libm/machine/spu/s_erf.c newlib/libm/machine/spu/s_expm1.c newlib/libm/machine/spu/s_fabs.c newlib/libm/machine/spu/s_fdim.c newlib/libm/machine/spu/s_floor.c newlib/libm/machine/spu/s_fma.c newlib/libm/machine/spu/s_fmax.c newlib/libm/machine/spu/s_fmin.c newlib/libm/machine/spu/s_frexp.c newlib/libm/machine/spu/s_ilogb.c newlib/libm/machine/spu/s_isnan.c newlib/libm/machine/spu/s_ldexp.c newlib/libm/machine/spu/s_log1p.c newlib/libm/machine/spu/s_lrint.c newlib/libm/machine/spu/s_lround.c newlib/libm/machine/spu/s_nearbyint.c newlib/libm/machine/spu/s_nextafter.c newlib/libm/machine/spu/s_remquo.c newlib/libm/machine/spu/s_rint.c newlib/libm/machine/spu/s_round.c newlib/libm/machine/spu/s_scalbn.c newlib/libm/machine/spu/s_sin.c newlib/libm/machine/spu/s_tan.c newlib/libm/machine/spu/s_tanh.c newlib/libm/machine/spu/s_trunc.c newlib/libm/machine/spu/sf_asinh.c newlib/libm/machine/spu/sf_atan.c newlib/libm/machine/spu/sf_cbrt.c newlib/libm/machine/spu/sf_ceil.c newlib/libm/machine/spu/sf_copysign.c newlib/libm/machine/spu/sf_cos.c newlib/libm/machine/spu/sf_erf.c newlib/libm/machine/spu/sf_expm1.c newlib/libm/machine/spu/sf_fabs.c newlib/libm/machine/spu/sf_fdim.c newlib/libm/machine/spu/sf_finite.c newlib/libm/machine/spu/sf_floor.c newlib/libm/machine/spu/sf_fma.c newlib/libm/machine/spu/sf_fmax.c newlib/libm/machine/spu/sf_fmin.c newlib/libm/machine/spu/sf_fpclassify.c newlib/libm/machine/spu/sf_frexp.c newlib/libm/machine/spu/sf_ilogb.c newlib/libm/machine/spu/sf_isinf.c newlib/libm/machine/spu/sf_isinff.c newlib/libm/machine/spu/sf_isnan.c newlib/libm/machine/spu/sf_isnanf.c newlib/libm/machine/spu/sf_ldexp.c newlib/libm/machine/spu/sf_log1p.c newlib/libm/machine/spu/sf_logb.c newlib/libm/machine/spu/sf_lrint.c newlib/libm/machine/spu/sf_lround.c newlib/libm/machine/spu/sf_nan.c newlib/libm/machine/spu/sf_nearbyint.c newlib/libm/machine/spu/sf_nextafter.c newlib/libm/machine/spu/sf_remquo.c newlib/libm/machine/spu/sf_rint.c newlib/libm/machine/spu/sf_round.c newlib/libm/machine/spu/sf_scalbn.c newlib/libm/machine/spu/sf_sin.c newlib/libm/machine/spu/sf_tan.c newlib/libm/machine/spu/sf_tanh.c newlib/libm/machine/spu/sf_trunc.c newlib/libm/machine/spu/w_acos.c newlib/libm/machine/spu/w_acosh.c newlib/libm/machine/spu/w_asin.c newlib/libm/machine/spu/w_atan2.c newlib/libm/machine/spu/w_atanh.c newlib/libm/machine/spu/w_cosh.c newlib/libm/machine/spu/w_exp.c newlib/libm/machine/spu/w_exp2.c newlib/libm/machine/spu/w_fmod.c newlib/libm/machine/spu/w_hypot.c newlib/libm/machine/spu/w_lgamma.c newlib/libm/machine/spu/w_log.c newlib/libm/machine/spu/w_log10.c newlib/libm/machine/spu/w_pow.c newlib/libm/machine/spu/w_remainder.c newlib/libm/machine/spu/w_sincos.c newlib/libm/machine/spu/w_sinh.c newlib/libm/machine/spu/w_sqrt.c newlib/libm/machine/spu/w_tgamma.c newlib/libm/machine/spu/wf_acos.c newlib/libm/machine/spu/wf_acosh.c newlib/libm/machine/spu/wf_asin.c newlib/libm/machine/spu/wf_atan2.c newlib/libm/machine/spu/wf_atanh.c newlib/libm/machine/spu/wf_cosh.c newlib/libm/machine/spu/wf_exp.c newlib/libm/machine/spu/wf_exp2.c newlib/libm/machine/spu/wf_fmod.c newlib/libm/machine/spu/wf_hypot.c newlib/libm/machine/spu/wf_lgamma.c newlib/libm/machine/spu/wf_log.c newlib/libm/machine/spu/wf_log10.c newlib/libm/machine/spu/wf_pow.c newlib/libm/machine/spu/wf_remainder.c newlib/libm/machine/spu/wf_sincos.c newlib/libm/machine/spu/wf_sinh.c newlib/libm/machine/spu/wf_sqrt.c newlib/libm/machine/spu/wf_tgamma.c newlib/libm/math/Makefile.am newlib/libm/math/Makefile.in newlib/libm/math/e_acos.c newlib/libm/math/e_acosh.c newlib/libm/math/e_asin.c newlib/libm/math/e_atan2.c newlib/libm/math/e_atanh.c newlib/libm/math/e_cosh.c newlib/libm/math/e_exp.c newlib/libm/math/e_fmod.c newlib/libm/math/e_hypot.c newlib/libm/math/e_j0.c newlib/libm/math/e_j1.c newlib/libm/math/e_jn.c newlib/libm/math/e_log.c newlib/libm/math/e_log10.c newlib/libm/math/e_pow.c newlib/libm/math/e_rem_pio2.c newlib/libm/math/e_remainder.c newlib/libm/math/e_scalb.c newlib/libm/math/e_sinh.c newlib/libm/math/e_sqrt.c newlib/libm/math/ef_acos.c newlib/libm/math/ef_acosh.c newlib/libm/math/ef_asin.c newlib/libm/math/ef_atan2.c newlib/libm/math/ef_atanh.c newlib/libm/math/ef_cosh.c newlib/libm/math/ef_exp.c newlib/libm/math/ef_fmod.c newlib/libm/math/ef_hypot.c newlib/libm/math/ef_j0.c newlib/libm/math/ef_j1.c newlib/libm/math/ef_jn.c newlib/libm/math/ef_log.c newlib/libm/math/ef_log10.c newlib/libm/math/ef_pow.c newlib/libm/math/ef_rem_pio2.c newlib/libm/math/ef_remainder.c newlib/libm/math/ef_scalb.c newlib/libm/math/ef_sinh.c newlib/libm/math/ef_sqrt.c newlib/libm/math/er_gamma.c newlib/libm/math/er_lgamma.c newlib/libm/math/erf_gamma.c newlib/libm/math/erf_lgamma.c newlib/libm/math/k_cos.c newlib/libm/math/k_rem_pio2.c newlib/libm/math/k_sin.c newlib/libm/math/k_standard.c newlib/libm/math/k_tan.c newlib/libm/math/kf_cos.c newlib/libm/math/kf_rem_pio2.c newlib/libm/math/kf_sin.c newlib/libm/math/kf_tan.c newlib/libm/math/math.tex newlib/libm/math/s_asinh.c newlib/libm/math/s_atan.c newlib/libm/math/s_ceil.c newlib/libm/math/s_cos.c newlib/libm/math/s_erf.c newlib/libm/math/s_fabs.c newlib/libm/math/s_floor.c newlib/libm/math/s_frexp.c newlib/libm/math/s_ldexp.c newlib/libm/math/s_signif.c newlib/libm/math/s_sin.c newlib/libm/math/s_tan.c newlib/libm/math/s_tanh.c newlib/libm/math/sf_asinh.c newlib/libm/math/sf_atan.c newlib/libm/math/sf_ceil.c newlib/libm/math/sf_cos.c newlib/libm/math/sf_erf.c newlib/libm/math/sf_fabs.c newlib/libm/math/sf_floor.c newlib/libm/math/sf_frexp.c newlib/libm/math/sf_ldexp.c newlib/libm/math/sf_signif.c newlib/libm/math/sf_sin.c newlib/libm/math/sf_tan.c newlib/libm/math/sf_tanh.c newlib/libm/math/w_acos.c newlib/libm/math/w_acosh.c newlib/libm/math/w_asin.c newlib/libm/math/w_atan2.c newlib/libm/math/w_atanh.c newlib/libm/math/w_cabs.c newlib/libm/math/w_cosh.c newlib/libm/math/w_drem.c newlib/libm/math/w_exp.c newlib/libm/math/w_exp2.c newlib/libm/math/w_fmod.c newlib/libm/math/w_gamma.c newlib/libm/math/w_hypot.c newlib/libm/math/w_j0.c newlib/libm/math/w_j1.c newlib/libm/math/w_jn.c newlib/libm/math/w_lgamma.c newlib/libm/math/w_log.c newlib/libm/math/w_log10.c newlib/libm/math/w_pow.c newlib/libm/math/w_remainder.c newlib/libm/math/w_scalb.c newlib/libm/math/w_sincos.c newlib/libm/math/w_sinh.c newlib/libm/math/w_sqrt.c newlib/libm/math/w_tgamma.c newlib/libm/math/wf_acos.c newlib/libm/math/wf_acosh.c newlib/libm/math/wf_asin.c newlib/libm/math/wf_atan2.c newlib/libm/math/wf_atanh.c newlib/libm/math/wf_cabs.c newlib/libm/math/wf_cosh.c newlib/libm/math/wf_drem.c newlib/libm/math/wf_exp.c newlib/libm/math/wf_exp2.c newlib/libm/math/wf_fmod.c newlib/libm/math/wf_gamma.c newlib/libm/math/wf_hypot.c newlib/libm/math/wf_j0.c newlib/libm/math/wf_j1.c newlib/libm/math/wf_jn.c newlib/libm/math/wf_lgamma.c newlib/libm/math/wf_log.c newlib/libm/math/wf_log10.c newlib/libm/math/wf_pow.c newlib/libm/math/wf_remainder.c newlib/libm/math/wf_scalb.c newlib/libm/math/wf_sincos.c newlib/libm/math/wf_sinh.c newlib/libm/math/wf_sqrt.c newlib/libm/math/wf_tgamma.c newlib/libm/math/wr_gamma.c newlib/libm/math/wr_lgamma.c newlib/libm/math/wrf_gamma.c newlib/libm/math/wrf_lgamma.c newlib/libm/mathfp/Makefile.am newlib/libm/mathfp/Makefile.in newlib/libm/mathfp/e_acosh.c newlib/libm/mathfp/e_atanh.c newlib/libm/mathfp/e_hypot.c newlib/libm/mathfp/e_j0.c newlib/libm/mathfp/e_j1.c newlib/libm/mathfp/e_remainder.c newlib/libm/mathfp/e_scalb.c newlib/libm/mathfp/ef_acosh.c newlib/libm/mathfp/ef_atanh.c newlib/libm/mathfp/ef_hypot.c newlib/libm/mathfp/ef_j0.c newlib/libm/mathfp/ef_j1.c newlib/libm/mathfp/ef_remainder.c newlib/libm/mathfp/ef_scalb.c newlib/libm/mathfp/er_gamma.c newlib/libm/mathfp/er_lgamma.c newlib/libm/mathfp/erf_gamma.c newlib/libm/mathfp/erf_lgamma.c newlib/libm/mathfp/mathfp.tex newlib/libm/mathfp/s_acos.c newlib/libm/mathfp/s_asin.c newlib/libm/mathfp/s_asine.c newlib/libm/mathfp/s_asinh.c newlib/libm/mathfp/s_atan.c newlib/libm/mathfp/s_atan2.c newlib/libm/mathfp/s_atangent.c newlib/libm/mathfp/s_ceil.c newlib/libm/mathfp/s_cos.c newlib/libm/mathfp/s_cosh.c newlib/libm/mathfp/s_erf.c newlib/libm/mathfp/s_exp.c newlib/libm/mathfp/s_exp2.c newlib/libm/mathfp/s_fabs.c newlib/libm/mathfp/s_floor.c newlib/libm/mathfp/s_fmod.c newlib/libm/mathfp/s_frexp.c newlib/libm/mathfp/s_ispos.c newlib/libm/mathfp/s_ldexp.c newlib/libm/mathfp/s_log.c newlib/libm/mathfp/s_log10.c newlib/libm/mathfp/s_logarithm.c newlib/libm/mathfp/s_mathcnst.c newlib/libm/mathfp/s_numtest.c newlib/libm/mathfp/s_pow.c newlib/libm/mathfp/s_signif.c newlib/libm/mathfp/s_sin.c newlib/libm/mathfp/s_sincos.c newlib/libm/mathfp/s_sine.c newlib/libm/mathfp/s_sineh.c newlib/libm/mathfp/s_sinf.c newlib/libm/mathfp/s_sinh.c newlib/libm/mathfp/s_sqrt.c newlib/libm/mathfp/s_tan.c newlib/libm/mathfp/s_tanh.c newlib/libm/mathfp/s_tgamma.c newlib/libm/mathfp/sf_acos.c newlib/libm/mathfp/sf_asin.c newlib/libm/mathfp/sf_asine.c newlib/libm/mathfp/sf_asinh.c newlib/libm/mathfp/sf_atan.c newlib/libm/mathfp/sf_atan2.c newlib/libm/mathfp/sf_atangent.c newlib/libm/mathfp/sf_ceil.c newlib/libm/mathfp/sf_cos.c newlib/libm/mathfp/sf_cosh.c newlib/libm/mathfp/sf_erf.c newlib/libm/mathfp/sf_exp.c newlib/libm/mathfp/sf_exp2.c newlib/libm/mathfp/sf_fabs.c newlib/libm/mathfp/sf_floor.c newlib/libm/mathfp/sf_fmod.c newlib/libm/mathfp/sf_frexp.c newlib/libm/mathfp/sf_ispos.c newlib/libm/mathfp/sf_ldexp.c newlib/libm/mathfp/sf_log.c newlib/libm/mathfp/sf_log10.c newlib/libm/mathfp/sf_logarithm.c newlib/libm/mathfp/sf_numtest.c newlib/libm/mathfp/sf_pow.c newlib/libm/mathfp/sf_signif.c newlib/libm/mathfp/sf_sin.c newlib/libm/mathfp/sf_sincos.c newlib/libm/mathfp/sf_sine.c newlib/libm/mathfp/sf_sineh.c newlib/libm/mathfp/sf_sinh.c newlib/libm/mathfp/sf_sqrt.c newlib/libm/mathfp/sf_tan.c newlib/libm/mathfp/sf_tanh.c newlib/libm/mathfp/sf_tgamma.c newlib/libm/mathfp/w_cabs.c newlib/libm/mathfp/w_drem.c newlib/libm/mathfp/w_jn.c newlib/libm/mathfp/wf_cabs.c newlib/libm/mathfp/wf_drem.c newlib/libm/mathfp/wf_jn.c newlib/libm/mathfp/zmath.h newlib/libm/test/Makefile.in newlib/libm/test/acos_vec.c newlib/libm/test/acosf_vec.c newlib/libm/test/acosh_vec.c newlib/libm/test/acoshf_vec.c newlib/libm/test/asin_vec.c newlib/libm/test/asinf_vec.c newlib/libm/test/asinh_vec.c newlib/libm/test/asinhf_vec.c newlib/libm/test/atan2_vec.c newlib/libm/test/atan2f_vec.c newlib/libm/test/atan_vec.c newlib/libm/test/atanf_vec.c newlib/libm/test/atanh_vec.c newlib/libm/test/atanhf_vec.c newlib/libm/test/ceil_vec.c newlib/libm/test/ceilf_vec.c newlib/libm/test/conv_vec.c newlib/libm/test/convert.c newlib/libm/test/cos_vec.c newlib/libm/test/cosf_vec.c newlib/libm/test/cosh_vec.c newlib/libm/test/coshf_vec.c newlib/libm/test/dcvt.c newlib/libm/test/dvec.c newlib/libm/test/erf_vec.c newlib/libm/test/erfc_vec.c newlib/libm/test/erfcf_vec.c newlib/libm/test/erff_vec.c newlib/libm/test/exp_vec.c newlib/libm/test/expf_vec.c newlib/libm/test/fabs_vec.c newlib/libm/test/fabsf_vec.c newlib/libm/test/floor_vec.c newlib/libm/test/floorf_vec.c newlib/libm/test/fmod_vec.c newlib/libm/test/fmodf_vec.c newlib/libm/test/gamma_vec.c newlib/libm/test/gammaf_vec.c newlib/libm/test/hypot_vec.c newlib/libm/test/hypotf_vec.c newlib/libm/test/iconv_vec.c newlib/libm/test/j0_vec.c newlib/libm/test/j0f_vec.c newlib/libm/test/j1_vec.c newlib/libm/test/j1f_vec.c newlib/libm/test/jn_vec.c newlib/libm/test/jnf_vec.c newlib/libm/test/log10_vec.c newlib/libm/test/log10f_vec.c newlib/libm/test/log1p_vec.c newlib/libm/test/log1pf_vec.c newlib/libm/test/log2_vec.c newlib/libm/test/log2f_vec.c newlib/libm/test/log_vec.c newlib/libm/test/logf_vec.c newlib/libm/test/math.c newlib/libm/test/math2.c newlib/libm/test/sin_vec.c newlib/libm/test/sinf_vec.c newlib/libm/test/sinh_vec.c newlib/libm/test/sinhf_vec.c newlib/libm/test/sprint_ivec.c newlib/libm/test/sprint_vec.c newlib/libm/test/sqrt_vec.c newlib/libm/test/sqrtf_vec.c newlib/libm/test/string.c newlib/libm/test/tan_vec.c newlib/libm/test/tanf_vec.c newlib/libm/test/tanh_vec.c newlib/libm/test/tanhf_vec.c newlib/libm/test/test.c newlib/libm/test/test.h newlib/libm/test/test_ieee.c newlib/libm/test/test_is.c newlib/libm/test/y0_vec.c newlib/libm/test/y0f_vec.c newlib/libm/test/y1_vec.c newlib/libm/test/y1f_vec.c newlib/libm/test/yn_vec.c newlib/libm/test/ynf_vec.c newlib/newlib.hin newlib/stamp-h.in newlib/testsuite/config/default.exp newlib/testsuite/include/check.h newlib/testsuite/lib/checkoutput.exp newlib/testsuite/lib/flags.exp newlib/testsuite/lib/newlib.exp newlib/testsuite/lib/passfail.exp newlib/testsuite/newlib.elix/elix.exp newlib/testsuite/newlib.elix/tmmap.c newlib/testsuite/newlib.iconv/iconv.exp newlib/testsuite/newlib.iconv/iconvjp.c newlib/testsuite/newlib.iconv/iconvnm.c newlib/testsuite/newlib.iconv/iconvru.c newlib/testsuite/newlib.locale/UTF-8.c newlib/testsuite/newlib.locale/UTF-8.exp newlib/testsuite/newlib.locale/locale.exp newlib/testsuite/newlib.search/hsearchtest.c newlib/testsuite/newlib.search/hsearchtest.exp newlib/testsuite/newlib.stdlib/atexit.c newlib/testsuite/newlib.stdlib/atexit.exp newlib/testsuite/newlib.stdlib/size_max.c newlib/testsuite/newlib.stdlib/stdlib.exp newlib/testsuite/newlib.string/memmove1.c newlib/testsuite/newlib.string/string.exp newlib/testsuite/newlib.string/tstring.c newlib/testsuite/newlib.wctype/tiswctype.c newlib/testsuite/newlib.wctype/twctrans.c newlib/testsuite/newlib.wctype/twctype.c newlib/testsuite/newlib.wctype/wctype.exp winsup/COPYING winsup/CYGWIN_LICENSE winsup/ChangeLog winsup/Makefile.common winsup/Makefile.in winsup/README winsup/acinclude.m4 winsup/aclocal.m4 winsup/configure winsup/configure.in winsup/cygserver/ChangeLog winsup/cygserver/Makefile.in winsup/cygserver/README winsup/cygserver/aclocal.m4 winsup/cygserver/bsd_helper.cc winsup/cygserver/bsd_helper.h winsup/cygserver/bsd_log.cc winsup/cygserver/bsd_log.h winsup/cygserver/bsd_mutex.cc winsup/cygserver/bsd_mutex.h winsup/cygserver/client.cc winsup/cygserver/configure winsup/cygserver/configure.in winsup/cygserver/cygserver-config winsup/cygserver/cygserver.cc winsup/cygserver/cygserver.conf winsup/cygserver/msg.cc winsup/cygserver/process.cc winsup/cygserver/process.h winsup/cygserver/sem.cc winsup/cygserver/shm.cc winsup/cygserver/sysv_msg.cc winsup/cygserver/sysv_sem.cc winsup/cygserver/sysv_shm.cc winsup/cygserver/threaded_queue.cc winsup/cygserver/threaded_queue.h winsup/cygserver/transport.cc winsup/cygserver/transport.h winsup/cygserver/transport_pipes.cc winsup/cygserver/transport_pipes.h winsup/cygserver/woutsup.h winsup/cygwin/ChangeLog winsup/cygwin/ChangeLog-1995 winsup/cygwin/ChangeLog-1996 winsup/cygwin/ChangeLog-1997 winsup/cygwin/ChangeLog-1998 winsup/cygwin/ChangeLog-1999 winsup/cygwin/ChangeLog-2000 winsup/cygwin/ChangeLog-2001 winsup/cygwin/ChangeLog-2002 winsup/cygwin/ChangeLog-2003 winsup/cygwin/ChangeLog-2004 winsup/cygwin/ChangeLog-2005 winsup/cygwin/ChangeLog-2006 winsup/cygwin/ChangeLog-2007 winsup/cygwin/Makefile.in winsup/cygwin/ROADMAP winsup/cygwin/acconfig.h winsup/cygwin/aclocal.m4 winsup/cygwin/analyze_sigfe winsup/cygwin/assert.cc winsup/cygwin/autoload.cc winsup/cygwin/automode.c winsup/cygwin/binmode.c winsup/cygwin/child_info.h winsup/cygwin/config.h.in winsup/cygwin/config/i386/profile.h winsup/cygwin/configure winsup/cygwin/configure.in winsup/cygwin/cpuid.h winsup/cygwin/crt0.c winsup/cygwin/ctype.cc winsup/cygwin/cxx.cc winsup/cygwin/cygerrno.h winsup/cygwin/cygheap.cc winsup/cygwin/cygheap.h winsup/cygwin/cyglsa.h winsup/cygwin/cygmagic winsup/cygwin/cygmalloc.h winsup/cygwin/cygserver.h winsup/cygwin/cygserver_ipc.h winsup/cygwin/cygserver_msg.h winsup/cygwin/cygserver_sem.h winsup/cygwin/cygserver_shm.h winsup/cygwin/cygthread.cc winsup/cygwin/cygthread.h winsup/cygwin/cygtls.cc winsup/cygwin/cygtls.h winsup/cygwin/cygwin-shilka winsup/cygwin/cygwin.din winsup/cygwin/cygwin.sc winsup/cygwin/cygwin_version.h winsup/cygwin/dcrt0.cc winsup/cygwin/debug.cc winsup/cygwin/debug.h winsup/cygwin/devices.cc winsup/cygwin/devices.h winsup/cygwin/devices.in winsup/cygwin/dir.cc winsup/cygwin/dlfcn.cc winsup/cygwin/dll_init.cc winsup/cygwin/dll_init.h winsup/cygwin/dll_init.sgml winsup/cygwin/dllfixdbg winsup/cygwin/dlmalloc.c winsup/cygwin/dlmalloc.h winsup/cygwin/dtable.cc winsup/cygwin/dtable.h winsup/cygwin/dtable.sgml winsup/cygwin/environ.cc winsup/cygwin/environ.h winsup/cygwin/errno.cc winsup/cygwin/exceptions.cc winsup/cygwin/exec.cc winsup/cygwin/external.cc winsup/cygwin/external.sgml winsup/cygwin/fcntl.cc winsup/cygwin/fhandler.cc winsup/cygwin/fhandler.h winsup/cygwin/fhandler_clipboard.cc winsup/cygwin/fhandler_console.cc winsup/cygwin/fhandler_disk_file.cc winsup/cygwin/fhandler_dsp.cc winsup/cygwin/fhandler_fifo.cc winsup/cygwin/fhandler_floppy.cc winsup/cygwin/fhandler_mailslot.cc winsup/cygwin/fhandler_mem.cc winsup/cygwin/fhandler_netdrive.cc winsup/cygwin/fhandler_nodevice.cc winsup/cygwin/fhandler_proc.cc winsup/cygwin/fhandler_process.cc winsup/cygwin/fhandler_procnet.cc winsup/cygwin/fhandler_random.cc winsup/cygwin/fhandler_raw.cc winsup/cygwin/fhandler_registry.cc winsup/cygwin/fhandler_serial.cc winsup/cygwin/fhandler_socket.cc winsup/cygwin/fhandler_tape.cc winsup/cygwin/fhandler_termios.cc winsup/cygwin/fhandler_tty.cc winsup/cygwin/fhandler_virtual.cc winsup/cygwin/fhandler_windows.cc winsup/cygwin/fhandler_zero.cc winsup/cygwin/flock.cc winsup/cygwin/fork.cc winsup/cygwin/gcrt0.c winsup/cygwin/gendef winsup/cygwin/gendevices winsup/cygwin/gentls_offsets winsup/cygwin/glob.cc winsup/cygwin/gmon.c winsup/cygwin/gmon.h winsup/cygwin/grp.cc winsup/cygwin/heap.cc winsup/cygwin/heap.h winsup/cygwin/hires.h winsup/cygwin/hookapi.cc winsup/cygwin/how-autoload-works.txt winsup/cygwin/how-cygheap-works.txt winsup/cygwin/how-cygtls-works.txt winsup/cygwin/how-fhandlers-work.txt winsup/cygwin/how-signals-work.txt winsup/cygwin/how-spawn-works.txt winsup/cygwin/how-to-debug-cygwin.txt winsup/cygwin/how-vfork-works.txt winsup/cygwin/include/a.out.h winsup/cygwin/include/arpa/ftp.h winsup/cygwin/include/arpa/inet.h winsup/cygwin/include/arpa/nameser.h winsup/cygwin/include/arpa/nameser_compat.h winsup/cygwin/include/arpa/telnet.h winsup/cygwin/include/asm/byteorder.h winsup/cygwin/include/asm/socket.h winsup/cygwin/include/asm/types.h winsup/cygwin/include/attr/xattr.h winsup/cygwin/include/byteswap.h winsup/cygwin/include/ctype.h winsup/cygwin/include/cygwin/_types.h winsup/cygwin/include/cygwin/acl.h winsup/cygwin/include/cygwin/config.h winsup/cygwin/include/cygwin/core_dump.h winsup/cygwin/include/cygwin/cygwin_dll.h winsup/cygwin/include/cygwin/fs.h winsup/cygwin/include/cygwin/grp.h winsup/cygwin/include/cygwin/hdreg.h winsup/cygwin/include/cygwin/icmp.h winsup/cygwin/include/cygwin/if.h winsup/cygwin/include/cygwin/in.h winsup/cygwin/include/cygwin/in6.h winsup/cygwin/include/cygwin/in_systm.h winsup/cygwin/include/cygwin/ipc.h winsup/cygwin/include/cygwin/kd.h winsup/cygwin/include/cygwin/msg.h winsup/cygwin/include/cygwin/mtio.h winsup/cygwin/include/cygwin/rdevio.h winsup/cygwin/include/cygwin/sem.h winsup/cygwin/include/cygwin/shm.h winsup/cygwin/include/cygwin/signal.h winsup/cygwin/include/cygwin/socket.h winsup/cygwin/include/cygwin/sockios.h winsup/cygwin/include/cygwin/stat.h winsup/cygwin/include/cygwin/stdlib.h winsup/cygwin/include/cygwin/sys_time.h winsup/cygwin/include/cygwin/sysproto.h winsup/cygwin/include/cygwin/time.h winsup/cygwin/include/cygwin/types.h winsup/cygwin/include/cygwin/utmp.h winsup/cygwin/include/cygwin/version.h winsup/cygwin/include/cygwin/wait.h winsup/cygwin/include/dlfcn.h winsup/cygwin/include/elf.h winsup/cygwin/include/endian.h winsup/cygwin/include/err.h winsup/cygwin/include/exceptions.h winsup/cygwin/include/fcntl.h winsup/cygwin/include/features.h winsup/cygwin/include/fnmatch.h winsup/cygwin/include/fts.h winsup/cygwin/include/ftw.h winsup/cygwin/include/getopt.h winsup/cygwin/include/glob.h winsup/cygwin/include/icmp.h winsup/cygwin/include/ifaddrs.h winsup/cygwin/include/inttypes.h winsup/cygwin/include/io.h winsup/cygwin/include/lastlog.h winsup/cygwin/include/libgen.h winsup/cygwin/include/limits.h winsup/cygwin/include/machine/stdlib.h winsup/cygwin/include/mapi.h winsup/cygwin/include/memory.h winsup/cygwin/include/mntent.h winsup/cygwin/include/mqueue.h winsup/cygwin/include/net/if.h winsup/cygwin/include/netdb.h winsup/cygwin/include/netinet/in.h winsup/cygwin/include/netinet/in_systm.h winsup/cygwin/include/netinet/ip.h winsup/cygwin/include/netinet/ip_icmp.h winsup/cygwin/include/netinet/tcp.h winsup/cygwin/include/netinet/udp.h winsup/cygwin/include/paths.h winsup/cygwin/include/poll.h winsup/cygwin/include/pthread.h winsup/cygwin/include/pty.h winsup/cygwin/include/resolv.h winsup/cygwin/include/sched.h winsup/cygwin/include/search.h winsup/cygwin/include/semaphore.h winsup/cygwin/include/stdint.h winsup/cygwin/include/strings.h winsup/cygwin/include/sys/acl.h winsup/cygwin/include/sys/copying.dj winsup/cygwin/include/sys/cygwin.h winsup/cygwin/include/sys/dirent.h winsup/cygwin/include/sys/elf32.h winsup/cygwin/include/sys/elf64.h winsup/cygwin/include/sys/elf_common.h winsup/cygwin/include/sys/elf_generic.h winsup/cygwin/include/sys/file.h winsup/cygwin/include/sys/ioctl.h winsup/cygwin/include/sys/ipc.h winsup/cygwin/include/sys/kd.h winsup/cygwin/include/sys/lock.h winsup/cygwin/include/sys/mman.h winsup/cygwin/include/sys/mount.h winsup/cygwin/include/sys/msg.h winsup/cygwin/include/sys/mtio.h winsup/cygwin/include/sys/param.h winsup/cygwin/include/sys/poll.h winsup/cygwin/include/sys/procfs.h winsup/cygwin/include/sys/queue.h winsup/cygwin/include/sys/resource.h winsup/cygwin/include/sys/select.h winsup/cygwin/include/sys/sem.h winsup/cygwin/include/sys/shm.h winsup/cygwin/include/sys/smallprint.h winsup/cygwin/include/sys/socket.h winsup/cygwin/include/sys/soundcard.h winsup/cygwin/include/sys/statfs.h winsup/cygwin/include/sys/statvfs.h winsup/cygwin/include/sys/stdio.h winsup/cygwin/include/sys/strace.h winsup/cygwin/include/sys/syslimits.h winsup/cygwin/include/sys/syslog.h winsup/cygwin/include/sys/sysmacros.h winsup/cygwin/include/sys/sysproto.h winsup/cygwin/include/sys/termio.h winsup/cygwin/include/sys/termios.h winsup/cygwin/include/sys/ttychars.h winsup/cygwin/include/sys/uio.h winsup/cygwin/include/sys/un.h winsup/cygwin/include/sys/utime.h winsup/cygwin/include/sys/utmp.h winsup/cygwin/include/sys/utsname.h winsup/cygwin/include/sys/vfs.h winsup/cygwin/include/sys/wait.h winsup/cygwin/include/sysexits.h winsup/cygwin/include/syslog.h winsup/cygwin/include/termio.h winsup/cygwin/include/tzfile.h winsup/cygwin/include/utmpx.h winsup/cygwin/include/wait.h winsup/cygwin/init.cc winsup/cygwin/ioctl.cc winsup/cygwin/ipc.cc winsup/cygwin/kernel32.cc winsup/cygwin/lib/_cygwin_crt0_common.cc winsup/cygwin/lib/crt0.h winsup/cygwin/lib/cygwin_attach_dll.c winsup/cygwin/lib/cygwin_crt0.c winsup/cygwin/lib/dll_entry.c winsup/cygwin/lib/dll_main.cc winsup/cygwin/lib/libcmain.c winsup/cygwin/lib/premain0.c winsup/cygwin/lib/premain1.c winsup/cygwin/lib/premain2.c winsup/cygwin/lib/premain3.c winsup/cygwin/lib/pseudo-reloc.c winsup/cygwin/libc/bsdlib.cc winsup/cygwin/libc/fnmatch.c winsup/cygwin/libc/fts.c winsup/cygwin/libc/ftw.c winsup/cygwin/libc/getopt.c winsup/cygwin/libc/inet_addr.c winsup/cygwin/libc/inet_network.c winsup/cygwin/libc/minires-os-if.c winsup/cygwin/libc/minires.c winsup/cygwin/libc/minires.h winsup/cygwin/libc/nftw.c winsup/cygwin/libc/rcmd.cc winsup/cygwin/libc/rexec.cc winsup/cygwin/libc/strptime.cc winsup/cygwin/libc/xsique.cc winsup/cygwin/localtime.cc winsup/cygwin/lsearch.cc winsup/cygwin/malloc.cc winsup/cygwin/malloc_wrapper.cc winsup/cygwin/mcount.c winsup/cygwin/miscfuncs.cc winsup/cygwin/miscfuncs.h winsup/cygwin/mktemp.cc winsup/cygwin/mkvers.sh winsup/cygwin/mmap.cc winsup/cygwin/mmap_helper.h winsup/cygwin/mount.cc winsup/cygwin/msg.cc winsup/cygwin/mtinfo.h winsup/cygwin/net.cc winsup/cygwin/netdb.cc winsup/cygwin/newsym winsup/cygwin/nfs.cc winsup/cygwin/nfs.h winsup/cygwin/ntdll.h winsup/cygwin/ntea.cc winsup/cygwin/passwd.cc winsup/cygwin/path.cc winsup/cygwin/path.h winsup/cygwin/path.sgml winsup/cygwin/perprocess.h winsup/cygwin/pinfo.cc winsup/cygwin/pinfo.h winsup/cygwin/pipe.cc winsup/cygwin/poll.cc winsup/cygwin/posix.sgml winsup/cygwin/posix_ipc.cc winsup/cygwin/profil.c winsup/cygwin/profil.h winsup/cygwin/pseudo-reloc.cc winsup/cygwin/pthread.cc winsup/cygwin/pwdgrp.h winsup/cygwin/random.cc winsup/cygwin/regex/COPYRIGHT winsup/cygwin/regex/cclass.h winsup/cygwin/regex/cname.h winsup/cygwin/regex/engine.c winsup/cygwin/regex/engine.ih winsup/cygwin/regex/mkh winsup/cygwin/regex/regcomp.c winsup/cygwin/regex/regcomp.ih winsup/cygwin/regex/regerror.c winsup/cygwin/regex/regerror.ih winsup/cygwin/regex/regex.3 winsup/cygwin/regex/regex.7 winsup/cygwin/regex/regex.h winsup/cygwin/regex/regex2.h winsup/cygwin/regex/regexec.c winsup/cygwin/regex/regfree.c winsup/cygwin/regex/tests winsup/cygwin/regex/utils.h winsup/cygwin/registry.cc winsup/cygwin/registry.h winsup/cygwin/resource.cc winsup/cygwin/rmsym winsup/cygwin/scandir.cc winsup/cygwin/sched.cc winsup/cygwin/sec_acl.cc winsup/cygwin/sec_auth.cc winsup/cygwin/sec_helper.cc winsup/cygwin/security.cc winsup/cygwin/security.h winsup/cygwin/security.sgml winsup/cygwin/select.cc winsup/cygwin/sem.cc winsup/cygwin/shared.cc winsup/cygwin/shared_info.h winsup/cygwin/shm.cc winsup/cygwin/signal.cc winsup/cygwin/sigproc.cc winsup/cygwin/sigproc.h winsup/cygwin/smallprint.cc winsup/cygwin/sortdin winsup/cygwin/spawn.cc winsup/cygwin/speclib winsup/cygwin/stackdump.sgml winsup/cygwin/strace.cc winsup/cygwin/strfuncs.cc winsup/cygwin/string.h winsup/cygwin/strsep.cc winsup/cygwin/strsig.cc winsup/cygwin/sync.cc winsup/cygwin/sync.h winsup/cygwin/syscalls.cc winsup/cygwin/sysconf.cc winsup/cygwin/syslog.cc winsup/cygwin/termios.cc winsup/cygwin/textmode.c winsup/cygwin/textreadmode.c winsup/cygwin/thread.cc winsup/cygwin/thread.h winsup/cygwin/timer.cc winsup/cygwin/times.cc winsup/cygwin/tls_pbuf.cc winsup/cygwin/tls_pbuf.h winsup/cygwin/tlsoffsets.h winsup/cygwin/tty.cc winsup/cygwin/tty.h winsup/cygwin/tz_posixrules.h winsup/cygwin/uinfo.cc winsup/cygwin/uname.cc winsup/cygwin/wait.cc winsup/cygwin/wchar.h winsup/cygwin/winbase.h winsup/cygwin/wincap.cc winsup/cygwin/wincap.h winsup/cygwin/window.cc winsup/cygwin/winf.cc winsup/cygwin/winf.h winsup/cygwin/wininfo.h winsup/cygwin/winsup.h winsup/cygwin/winver.rc winsup/doc/ChangeLog winsup/doc/Makefile.in winsup/doc/README winsup/doc/aclocal.m4 winsup/doc/configure winsup/doc/configure.in winsup/doc/cygserver.sgml winsup/doc/cygwin-api.in.sgml winsup/doc/cygwin-ug-net.in.sgml winsup/doc/cygwin-ug.in.sgml winsup/doc/cygwin.dsl winsup/doc/cygwinenv.sgml winsup/doc/dll.sgml winsup/doc/doctool.c winsup/doc/doctool.txt winsup/doc/effectively.sgml winsup/doc/faq-api.xml winsup/doc/faq-problems.xml winsup/doc/faq-programming.xml winsup/doc/faq-resources.xml winsup/doc/faq-sections.xml winsup/doc/faq-setup.xml winsup/doc/faq-using.xml winsup/doc/faq-what.xml winsup/doc/faq.xml winsup/doc/fhandler-tut.txt winsup/doc/filemodes.sgml winsup/doc/gcc.sgml winsup/doc/gdb.sgml winsup/doc/legal.sgml winsup/doc/ntsec.sgml winsup/doc/overview.sgml winsup/doc/overview2.sgml winsup/doc/pathnames.sgml winsup/doc/programming.sgml winsup/doc/setup-net.sgml winsup/doc/setup.sgml winsup/doc/setup2.sgml winsup/doc/textbinary.sgml winsup/doc/using.sgml winsup/doc/windres.sgml winsup/lsaauth/ChangeLog winsup/lsaauth/Makefile.in winsup/lsaauth/aclocal.m4 winsup/lsaauth/configure winsup/lsaauth/configure.in winsup/lsaauth/cyglsa-config winsup/lsaauth/cyglsa.c winsup/lsaauth/cyglsa.din winsup/lsaauth/cyglsa64.dll winsup/lsaauth/make-64bit-version-with-visual-c.bat winsup/lsaauth/mslsa.def winsup/mingw/CONTRIBUTORS winsup/mingw/CRT_fp10.c winsup/mingw/CRT_fp8.c winsup/mingw/CRT_noglob.c winsup/mingw/CRTfmode.c winsup/mingw/CRTglob.c winsup/mingw/CRTinit.c winsup/mingw/ChangeLog winsup/mingw/DISCLAIMER winsup/mingw/Makefile.in winsup/mingw/README winsup/mingw/TODO winsup/mingw/aclocal.m4 winsup/mingw/binmode.c winsup/mingw/config.guess winsup/mingw/config.sub winsup/mingw/configure winsup/mingw/configure.in winsup/mingw/cpu_features.c winsup/mingw/cpu_features.h winsup/mingw/crt1.c winsup/mingw/crtdll.def winsup/mingw/crtmt.c winsup/mingw/crtst.c winsup/mingw/dllcrt1.c winsup/mingw/dllmain.c winsup/mingw/gccmain.c winsup/mingw/include/_mingw.h winsup/mingw/include/assert.h winsup/mingw/include/complex.h winsup/mingw/include/conio.h winsup/mingw/include/ctype.h winsup/mingw/include/dir.h winsup/mingw/include/direct.h winsup/mingw/include/dirent.h winsup/mingw/include/dos.h winsup/mingw/include/errno.h winsup/mingw/include/excpt.h winsup/mingw/include/fcntl.h winsup/mingw/include/fenv.h winsup/mingw/include/float.h winsup/mingw/include/getopt.h winsup/mingw/include/inttypes.h winsup/mingw/include/io.h winsup/mingw/include/libgen.h winsup/mingw/include/limits.h winsup/mingw/include/locale.h winsup/mingw/include/malloc.h winsup/mingw/include/math.h winsup/mingw/include/mbctype.h winsup/mingw/include/mbstring.h winsup/mingw/include/mem.h winsup/mingw/include/memory.h winsup/mingw/include/process.h winsup/mingw/include/search.h winsup/mingw/include/setjmp.h winsup/mingw/include/share.h winsup/mingw/include/signal.h winsup/mingw/include/stdint.h winsup/mingw/include/stdio.h winsup/mingw/include/stdlib.h winsup/mingw/include/string.h winsup/mingw/include/strings.h winsup/mingw/include/sys/fcntl.h winsup/mingw/include/sys/file.h winsup/mingw/include/sys/locking.h winsup/mingw/include/sys/param.h winsup/mingw/include/sys/stat.h winsup/mingw/include/sys/time.h winsup/mingw/include/sys/timeb.h winsup/mingw/include/sys/types.h winsup/mingw/include/sys/unistd.h winsup/mingw/include/sys/utime.h winsup/mingw/include/tchar.h winsup/mingw/include/time.h winsup/mingw/include/unistd.h winsup/mingw/include/utime.h winsup/mingw/include/values.h winsup/mingw/include/varargs.h winsup/mingw/include/wchar.h winsup/mingw/include/wctype.h winsup/mingw/init.c winsup/mingw/install-sh winsup/mingw/isascii.c winsup/mingw/iscsym.c winsup/mingw/iscsymf.c winsup/mingw/jamfile winsup/mingw/main.c winsup/mingw/man/dirname.man winsup/mingw/mingwex/Makefile.in winsup/mingw/mingwex/_Exit.c winsup/mingw/mingwex/aclocal.m4 winsup/mingw/mingwex/atoll.c winsup/mingw/mingwex/basename.c winsup/mingw/mingwex/btowc.c winsup/mingw/mingwex/complex/cabs.c winsup/mingw/mingwex/complex/cabsf.c winsup/mingw/mingwex/complex/cabsl.c winsup/mingw/mingwex/complex/cacos.c winsup/mingw/mingwex/complex/cacosf.c winsup/mingw/mingwex/complex/cacosh.c winsup/mingw/mingwex/complex/cacoshf.c winsup/mingw/mingwex/complex/cacoshl.c winsup/mingw/mingwex/complex/cacosl.c winsup/mingw/mingwex/complex/carg.c winsup/mingw/mingwex/complex/cargf.c winsup/mingw/mingwex/complex/cargl.c winsup/mingw/mingwex/complex/casin.c winsup/mingw/mingwex/complex/casinf.c winsup/mingw/mingwex/complex/casinh.c winsup/mingw/mingwex/complex/casinhf.c winsup/mingw/mingwex/complex/casinhl.c winsup/mingw/mingwex/complex/casinl.c winsup/mingw/mingwex/complex/catan.c winsup/mingw/mingwex/complex/catanf.c winsup/mingw/mingwex/complex/catanh.c winsup/mingw/mingwex/complex/catanhf.c winsup/mingw/mingwex/complex/catanhl.c winsup/mingw/mingwex/complex/catanl.c winsup/mingw/mingwex/complex/ccos.c winsup/mingw/mingwex/complex/ccosf.c winsup/mingw/mingwex/complex/ccosh.c winsup/mingw/mingwex/complex/ccoshf.c winsup/mingw/mingwex/complex/ccoshl.c winsup/mingw/mingwex/complex/ccosl.c winsup/mingw/mingwex/complex/cexp.c winsup/mingw/mingwex/complex/cexpf.c winsup/mingw/mingwex/complex/cexpl.c winsup/mingw/mingwex/complex/cimag.c winsup/mingw/mingwex/complex/cimagf.c winsup/mingw/mingwex/complex/cimagl.c winsup/mingw/mingwex/complex/clog.c winsup/mingw/mingwex/complex/clogf.c winsup/mingw/mingwex/complex/clogl.c winsup/mingw/mingwex/complex/cpow.c winsup/mingw/mingwex/complex/cpowf.c winsup/mingw/mingwex/complex/cpowl.c winsup/mingw/mingwex/complex/cproj.c winsup/mingw/mingwex/complex/cprojf.c winsup/mingw/mingwex/complex/cprojl.c winsup/mingw/mingwex/complex/creal.c winsup/mingw/mingwex/complex/crealf.c winsup/mingw/mingwex/complex/creall.c winsup/mingw/mingwex/complex/csin.c winsup/mingw/mingwex/complex/csinf.c winsup/mingw/mingwex/complex/csinh.c winsup/mingw/mingwex/complex/csinhf.c winsup/mingw/mingwex/complex/csinhl.c winsup/mingw/mingwex/complex/csinl.c winsup/mingw/mingwex/complex/csqrt.c winsup/mingw/mingwex/complex/csqrtf.c winsup/mingw/mingwex/complex/csqrtl.c winsup/mingw/mingwex/complex/ctan.c winsup/mingw/mingwex/complex/ctanf.c winsup/mingw/mingwex/complex/ctanh.c winsup/mingw/mingwex/complex/ctanhf.c winsup/mingw/mingwex/complex/ctanhl.c winsup/mingw/mingwex/complex/ctanl.c winsup/mingw/mingwex/configure winsup/mingw/mingwex/configure.in winsup/mingw/mingwex/dirent.c winsup/mingw/mingwex/dirname.c winsup/mingw/mingwex/feclearexcept.c winsup/mingw/mingwex/fegetenv.c winsup/mingw/mingwex/fegetexceptflag.c winsup/mingw/mingwex/fegetround.c winsup/mingw/mingwex/feholdexcept.c winsup/mingw/mingwex/feraiseexcept.c winsup/mingw/mingwex/fesetenv.c winsup/mingw/mingwex/fesetexceptflag.c winsup/mingw/mingwex/fesetround.c winsup/mingw/mingwex/fetestexcept.c winsup/mingw/mingwex/feupdateenv.c winsup/mingw/mingwex/ftruncate.c winsup/mingw/mingwex/fwide.c winsup/mingw/mingwex/gdtoa/README winsup/mingw/mingwex/gdtoa/arithchk.c winsup/mingw/mingwex/gdtoa/dmisc.c winsup/mingw/mingwex/gdtoa/dtoa.c winsup/mingw/mingwex/gdtoa/g__fmt.c winsup/mingw/mingwex/gdtoa/g_dfmt.c winsup/mingw/mingwex/gdtoa/g_ffmt.c winsup/mingw/mingwex/gdtoa/g_xfmt.c winsup/mingw/mingwex/gdtoa/gd_arith.h winsup/mingw/mingwex/gdtoa/gd_qnan.h winsup/mingw/mingwex/gdtoa/gdtoa.c winsup/mingw/mingwex/gdtoa/gdtoa.h winsup/mingw/mingwex/gdtoa/gdtoaimp.h winsup/mingw/mingwex/gdtoa/gethex.c winsup/mingw/mingwex/gdtoa/gmisc.c winsup/mingw/mingwex/gdtoa/hd_init.c winsup/mingw/mingwex/gdtoa/hexnan.c winsup/mingw/mingwex/gdtoa/misc.c winsup/mingw/mingwex/gdtoa/qnan.c winsup/mingw/mingwex/gdtoa/smisc.c winsup/mingw/mingwex/gdtoa/strtodg.c winsup/mingw/mingwex/gdtoa/strtodnrp.c winsup/mingw/mingwex/gdtoa/strtof.c winsup/mingw/mingwex/gdtoa/strtopx.c winsup/mingw/mingwex/gdtoa/sum.c winsup/mingw/mingwex/gdtoa/ulp.c winsup/mingw/mingwex/getopt.c winsup/mingw/mingwex/gettimeofday.c winsup/mingw/mingwex/imaxabs.c winsup/mingw/mingwex/imaxdiv.c winsup/mingw/mingwex/isblank.c winsup/mingw/mingwex/iswblank.c winsup/mingw/mingwex/lltoa.c winsup/mingw/mingwex/lltow.c winsup/mingw/mingwex/math/acosf.c winsup/mingw/mingwex/math/acosh.c winsup/mingw/mingwex/math/acoshf.c winsup/mingw/mingwex/math/acoshl.c winsup/mingw/mingwex/math/acosl.c winsup/mingw/mingwex/math/asinf.c winsup/mingw/mingwex/math/asinh.c winsup/mingw/mingwex/math/asinhf.c winsup/mingw/mingwex/math/asinhl.c winsup/mingw/mingwex/math/asinl.c winsup/mingw/mingwex/math/atan2f.c winsup/mingw/mingwex/math/atan2l.c winsup/mingw/mingwex/math/atanf.c winsup/mingw/mingwex/math/atanh.c winsup/mingw/mingwex/math/atanhf.c winsup/mingw/mingwex/math/atanhl.c winsup/mingw/mingwex/math/atanl.c winsup/mingw/mingwex/math/cbrt.c winsup/mingw/mingwex/math/cbrtf.c winsup/mingw/mingwex/math/cbrtl.c winsup/mingw/mingwex/math/ceilf.S winsup/mingw/mingwex/math/ceill.S winsup/mingw/mingwex/math/cephes_mconf.h winsup/mingw/mingwex/math/copysign.S winsup/mingw/mingwex/math/copysignf.S winsup/mingw/mingwex/math/copysignl.S winsup/mingw/mingwex/math/cosf.S winsup/mingw/mingwex/math/coshf.c winsup/mingw/mingwex/math/coshl.c winsup/mingw/mingwex/math/cosl.S winsup/mingw/mingwex/math/erfl.c winsup/mingw/mingwex/math/exp2.S winsup/mingw/mingwex/math/exp2f.S winsup/mingw/mingwex/math/exp2l.S winsup/mingw/mingwex/math/expf.c winsup/mingw/mingwex/math/expl.c winsup/mingw/mingwex/math/expm1.c winsup/mingw/mingwex/math/expm1f.c winsup/mingw/mingwex/math/expm1l.c winsup/mingw/mingwex/math/fabs.c winsup/mingw/mingwex/math/fabsf.c winsup/mingw/mingwex/math/fabsl.c winsup/mingw/mingwex/math/fastmath.h winsup/mingw/mingwex/math/fdim.c winsup/mingw/mingwex/math/fdimf.c winsup/mingw/mingwex/math/fdiml.c winsup/mingw/mingwex/math/floorf.S winsup/mingw/mingwex/math/floorl.S winsup/mingw/mingwex/math/fma.S winsup/mingw/mingwex/math/fmaf.S winsup/mingw/mingwex/math/fmal.c winsup/mingw/mingwex/math/fmax.c winsup/mingw/mingwex/math/fmaxf.c winsup/mingw/mingwex/math/fmaxl.c winsup/mingw/mingwex/math/fmin.c winsup/mingw/mingwex/math/fminf.c winsup/mingw/mingwex/math/fminl.c winsup/mingw/mingwex/math/fmodf.c winsup/mingw/mingwex/math/fmodl.c winsup/mingw/mingwex/math/fp_consts.c winsup/mingw/mingwex/math/fp_consts.h winsup/mingw/mingwex/math/fp_constsf.c winsup/mingw/mingwex/math/fp_constsl.c winsup/mingw/mingwex/math/fpclassify.c winsup/mingw/mingwex/math/fpclassifyf.c winsup/mingw/mingwex/math/fpclassifyl.c winsup/mingw/mingwex/math/frexpf.c winsup/mingw/mingwex/math/frexpl.S winsup/mingw/mingwex/math/fucom.c winsup/mingw/mingwex/math/hypotf.c winsup/mingw/mingwex/math/hypotl.c winsup/mingw/mingwex/math/ilogb.S winsup/mingw/mingwex/math/ilogbf.S winsup/mingw/mingwex/math/ilogbl.S winsup/mingw/mingwex/math/isnan.c winsup/mingw/mingwex/math/isnanf.c winsup/mingw/mingwex/math/isnanl.c winsup/mingw/mingwex/math/ldexpf.c winsup/mingw/mingwex/math/ldexpl.c winsup/mingw/mingwex/math/lgamma.c winsup/mingw/mingwex/math/lgammaf.c winsup/mingw/mingwex/math/lgammal.c winsup/mingw/mingwex/math/llrint.c winsup/mingw/mingwex/math/llrintf.c winsup/mingw/mingwex/math/llrintl.c winsup/mingw/mingwex/math/log10f.S winsup/mingw/mingwex/math/log10l.S winsup/mingw/mingwex/math/log1p.S winsup/mingw/mingwex/math/log1pf.S winsup/mingw/mingwex/math/log1pl.S winsup/mingw/mingwex/math/log2.S winsup/mingw/mingwex/math/log2f.S winsup/mingw/mingwex/math/log2l.S winsup/mingw/mingwex/math/logb.c winsup/mingw/mingwex/math/logbf.c winsup/mingw/mingwex/math/logbl.c winsup/mingw/mingwex/math/logf.S winsup/mingw/mingwex/math/logl.S winsup/mingw/mingwex/math/lrint.c winsup/mingw/mingwex/math/lrintf.c winsup/mingw/mingwex/math/lrintl.c winsup/mingw/mingwex/math/lround_generic.c winsup/mingw/mingwex/math/modff.c winsup/mingw/mingwex/math/modfl.c winsup/mingw/mingwex/math/nearbyint.S winsup/mingw/mingwex/math/nearbyintf.S winsup/mingw/mingwex/math/nearbyintl.S winsup/mingw/mingwex/math/nextafterf.c winsup/mingw/mingwex/math/nextafterl.c winsup/mingw/mingwex/math/nexttoward.c winsup/mingw/mingwex/math/nexttowardf.c winsup/mingw/mingwex/math/pow.c winsup/mingw/mingwex/math/powf.c winsup/mingw/mingwex/math/powi.c winsup/mingw/mingwex/math/powif.c winsup/mingw/mingwex/math/powil.c winsup/mingw/mingwex/math/powl.c winsup/mingw/mingwex/math/remainder.S winsup/mingw/mingwex/math/remainderf.S winsup/mingw/mingwex/math/remainderl.S winsup/mingw/mingwex/math/remquo.S winsup/mingw/mingwex/math/remquof.S winsup/mingw/mingwex/math/remquol.S winsup/mingw/mingwex/math/rint.c winsup/mingw/mingwex/math/rintf.c winsup/mingw/mingwex/math/rintl.c winsup/mingw/mingwex/math/round_generic.c winsup/mingw/mingwex/math/round_internal.h winsup/mingw/mingwex/math/s_erf.c winsup/mingw/mingwex/math/scalbn.S winsup/mingw/mingwex/math/scalbnf.S winsup/mingw/mingwex/math/scalbnl.S winsup/mingw/mingwex/math/sf_erf.c winsup/mingw/mingwex/math/signbit.c winsup/mingw/mingwex/math/signbitf.c winsup/mingw/mingwex/math/signbitl.c winsup/mingw/mingwex/math/sinf.S winsup/mingw/mingwex/math/sinhf.c winsup/mingw/mingwex/math/sinhl.c winsup/mingw/mingwex/math/sinl.S winsup/mingw/mingwex/math/sqrtf.c winsup/mingw/mingwex/math/sqrtl.c winsup/mingw/mingwex/math/tanf.S winsup/mingw/mingwex/math/tanhf.c winsup/mingw/mingwex/math/tanhl.c winsup/mingw/mingwex/math/tanl.S winsup/mingw/mingwex/math/tgamma.c winsup/mingw/mingwex/math/tgammaf.c winsup/mingw/mingwex/math/tgammal.c winsup/mingw/mingwex/math/trunc.c winsup/mingw/mingwex/math/truncf.c winsup/mingw/mingwex/math/truncl.c winsup/mingw/mingwex/mb_wc_common.h winsup/mingw/mingwex/mbrtowc.c winsup/mingw/mingwex/mbsinit.c winsup/mingw/mingwex/mingw-aligned-malloc.c winsup/mingw/mingwex/mingw-fseek.c winsup/mingw/mingwex/sitest.c winsup/mingw/mingwex/stdio/fopen64.c winsup/mingw/mingwex/stdio/fprintf.c winsup/mingw/mingwex/stdio/fseeko64.c winsup/mingw/mingwex/stdio/ftello64.c winsup/mingw/mingwex/stdio/lseek64.c winsup/mingw/mingwex/stdio/pformat.c winsup/mingw/mingwex/stdio/pformat.h winsup/mingw/mingwex/stdio/printf.c winsup/mingw/mingwex/stdio/snprintf.c winsup/mingw/mingwex/stdio/snwprintf.c winsup/mingw/mingwex/stdio/sprintf.c winsup/mingw/mingwex/stdio/vfprintf.c winsup/mingw/mingwex/stdio/vfscanf.c winsup/mingw/mingwex/stdio/vfwscanf.c winsup/mingw/mingwex/stdio/vprintf.c winsup/mingw/mingwex/stdio/vscanf.c winsup/mingw/mingwex/stdio/vsnprintf.c winsup/mingw/mingwex/stdio/vsnwprintf.c winsup/mingw/mingwex/stdio/vsprintf.c winsup/mingw/mingwex/stdio/vsscanf.c winsup/mingw/mingwex/stdio/vswscanf.c winsup/mingw/mingwex/stdio/vwscanf.c winsup/mingw/mingwex/strtoimax.c winsup/mingw/mingwex/strtoumax.c winsup/mingw/mingwex/tdelete.c winsup/mingw/mingwex/testwmem.c winsup/mingw/mingwex/tfind.c winsup/mingw/mingwex/tsearch.c winsup/mingw/mingwex/tst-aligned-malloc.c winsup/mingw/mingwex/twalk.c winsup/mingw/mingwex/ulltoa.c winsup/mingw/mingwex/ulltow.c winsup/mingw/mingwex/usleep.c winsup/mingw/mingwex/wcrtomb.c winsup/mingw/mingwex/wcstof.c winsup/mingw/mingwex/wcstoimax.c winsup/mingw/mingwex/wcstold.c winsup/mingw/mingwex/wcstoumax.c winsup/mingw/mingwex/wctob.c winsup/mingw/mingwex/wctrans.c winsup/mingw/mingwex/wctype.c winsup/mingw/mingwex/wdirent.c winsup/mingw/mingwex/wmemchr.c winsup/mingw/mingwex/wmemcmp.c winsup/mingw/mingwex/wmemcpy.c winsup/mingw/mingwex/wmemmove.c winsup/mingw/mingwex/wmemset.c winsup/mingw/mingwex/wtoll.c winsup/mingw/mkinstalldirs winsup/mingw/moldname.def.in winsup/mingw/msvcrt.def.in winsup/mingw/mthr.c winsup/mingw/mthr_init.c winsup/mingw/mthr_stub.c winsup/mingw/ofmt_stub.s winsup/mingw/profile/COPYING winsup/mingw/profile/CYGWIN_LICENSE winsup/mingw/profile/Makefile.in winsup/mingw/profile/aclocal.m4 winsup/mingw/profile/configure winsup/mingw/profile/configure.in winsup/mingw/profile/gcrt0.c winsup/mingw/profile/gmon.c winsup/mingw/profile/gmon.h winsup/mingw/profile/mcount.c winsup/mingw/profile/profil.c winsup/mingw/profile/profil.h winsup/mingw/profile/profile.h winsup/mingw/pseudo-reloc-list.c winsup/mingw/pseudo-reloc.c winsup/mingw/readme.txt winsup/mingw/samples/dirent/jamfile winsup/mingw/samples/dirent/test.c winsup/mingw/samples/dirent/wtest.c winsup/mingw/samples/dlltest/dll.c winsup/mingw/samples/dlltest/dll.def winsup/mingw/samples/dlltest/dll.h winsup/mingw/samples/dlltest/exe.c winsup/mingw/samples/dlltest/exe.exp winsup/mingw/samples/dlltest/expexe.c winsup/mingw/samples/dlltest/expexe.def winsup/mingw/samples/dlltest/jamfile winsup/mingw/samples/dlltest/loaddll.c winsup/mingw/samples/dlltest/loadexe.c winsup/mingw/samples/dlltest/readme.txt winsup/mingw/samples/dlltest/silly.cpp winsup/mingw/samples/dlltest/silly.def winsup/mingw/samples/dlltest/silly.exp winsup/mingw/samples/dlltest/silly.h winsup/mingw/samples/dlltest/sillydll.cpp winsup/mingw/samples/filehand/filehand.c winsup/mingw/samples/filehand/jamfile winsup/mingw/samples/filehand/junk.txt winsup/mingw/samples/fixargv/fixargv.c winsup/mingw/samples/fixargv/fixargv.h winsup/mingw/samples/fixargv/readme.txt winsup/mingw/samples/fmode/all.c winsup/mingw/samples/fmode/jamfile winsup/mingw/samples/fmode/readme.txt winsup/mingw/samples/fmode/test.c winsup/mingw/samples/fmode/test2.c winsup/mingw/samples/globbing/glob.c winsup/mingw/samples/globbing/jamfile winsup/mingw/samples/globbing/noglob.c winsup/mingw/samples/globbing/readme.txt winsup/mingw/samples/print/jamfile winsup/mingw/samples/print/prntest.c winsup/mingw/samples/seh/eh3.c winsup/mingw/samples/seh/exutil.c winsup/mingw/samples/seh/exutil.def winsup/mingw/samples/seh/exutil.h winsup/mingw/samples/seh/jamfile winsup/mingw/samples/seh/sehfix.c winsup/mingw/samples/seh/sehsub.c winsup/mingw/samples/seh/sehtest.c winsup/mingw/samples/simpledll/dll.c winsup/mingw/samples/simpledll/dll.cpp winsup/mingw/samples/simpledll/dll.def winsup/mingw/samples/simpledll/exe.c winsup/mingw/samples/simpledll/jamfile winsup/mingw/samples/simpledll/makedll.bat winsup/mingw/samples/test/jamfile winsup/mingw/samples/test/test.c winsup/mingw/samples/wintest/jamfile winsup/mingw/samples/wintest/test.c winsup/mingw/strcasecmp.c winsup/mingw/strncasecmp.c winsup/mingw/test_headers.c winsup/mingw/toascii.c winsup/mingw/txtmode.c winsup/mingw/wcscmpi.c winsup/testsuite/ChangeLog winsup/testsuite/Makefile.in winsup/testsuite/README winsup/testsuite/aclocal.m4 winsup/testsuite/config/default.exp winsup/testsuite/configure winsup/testsuite/configure.in winsup/testsuite/cygrun.c winsup/testsuite/libltp/include/dataascii.h winsup/testsuite/libltp/include/databin.h winsup/testsuite/libltp/include/file_lock.h winsup/testsuite/libltp/include/forker.h winsup/testsuite/libltp/include/open_flags.h winsup/testsuite/libltp/include/pattern.h winsup/testsuite/libltp/include/random_range.h winsup/testsuite/libltp/include/rmobj.h winsup/testsuite/libltp/include/search_path.h winsup/testsuite/libltp/include/str_to_bytes.h winsup/testsuite/libltp/include/string_to_tokens.h winsup/testsuite/libltp/include/test.h winsup/testsuite/libltp/include/tlibio.h winsup/testsuite/libltp/include/usctest.h winsup/testsuite/libltp/include/write_log.h winsup/testsuite/libltp/lib/dataascii.c winsup/testsuite/libltp/lib/databin.c winsup/testsuite/libltp/lib/datapid.c winsup/testsuite/libltp/lib/forker.c winsup/testsuite/libltp/lib/get_high_address.c winsup/testsuite/libltp/lib/libtestsuite.c winsup/testsuite/libltp/lib/open_flags.c winsup/testsuite/libltp/lib/parse_opts.c winsup/testsuite/libltp/lib/pattern.c winsup/testsuite/libltp/lib/rmobj.c winsup/testsuite/libltp/lib/search_path.c winsup/testsuite/libltp/lib/str_to_bytes.c winsup/testsuite/libltp/lib/string_to_tokens.c winsup/testsuite/libltp/lib/tst_res.c winsup/testsuite/libltp/lib/tst_sig.c winsup/testsuite/libltp/lib/tst_tmpdir.c winsup/testsuite/libltp/lib/write_log.c winsup/testsuite/winsup.api/checksignal.c winsup/testsuite/winsup.api/crlf.c winsup/testsuite/winsup.api/cygload.cc winsup/testsuite/winsup.api/cygload.exp winsup/testsuite/winsup.api/cygload.h winsup/testsuite/winsup.api/devdsp.c winsup/testsuite/winsup.api/devdsp_okay.h winsup/testsuite/winsup.api/devzero.c winsup/testsuite/winsup.api/iospeed.c winsup/testsuite/winsup.api/known_bugs.tcl winsup/testsuite/winsup.api/ltp/access01.c winsup/testsuite/winsup.api/ltp/access03.c winsup/testsuite/winsup.api/ltp/access04.c winsup/testsuite/winsup.api/ltp/access05.c winsup/testsuite/winsup.api/ltp/alarm01.c winsup/testsuite/winsup.api/ltp/alarm02.c winsup/testsuite/winsup.api/ltp/alarm03.c winsup/testsuite/winsup.api/ltp/alarm07.c winsup/testsuite/winsup.api/ltp/asyncio02.c winsup/testsuite/winsup.api/ltp/chdir02.c winsup/testsuite/winsup.api/ltp/chdir04.c winsup/testsuite/winsup.api/ltp/chmod01.c winsup/testsuite/winsup.api/ltp/chmod02.c winsup/testsuite/winsup.api/ltp/chown01.c winsup/testsuite/winsup.api/ltp/close01.c winsup/testsuite/winsup.api/ltp/close02.c winsup/testsuite/winsup.api/ltp/close08.c winsup/testsuite/winsup.api/ltp/creat01.c winsup/testsuite/winsup.api/ltp/creat03.c winsup/testsuite/winsup.api/ltp/creat09.c winsup/testsuite/winsup.api/ltp/dup01.c winsup/testsuite/winsup.api/ltp/dup02.c winsup/testsuite/winsup.api/ltp/dup03.c winsup/testsuite/winsup.api/ltp/dup04.c winsup/testsuite/winsup.api/ltp/dup05.c winsup/testsuite/winsup.api/ltp/execl01.c winsup/testsuite/winsup.api/ltp/execle01.c winsup/testsuite/winsup.api/ltp/execlp01.c winsup/testsuite/winsup.api/ltp/execv01.c winsup/testsuite/winsup.api/ltp/execve01.c winsup/testsuite/winsup.api/ltp/execvp01.c winsup/testsuite/winsup.api/ltp/exit01.c winsup/testsuite/winsup.api/ltp/exit02.c winsup/testsuite/winsup.api/ltp/fchdir01.c winsup/testsuite/winsup.api/ltp/fchdir02.c winsup/testsuite/winsup.api/ltp/fchmod01.c winsup/testsuite/winsup.api/ltp/fchown01.c winsup/testsuite/winsup.api/ltp/fcntl02.c winsup/testsuite/winsup.api/ltp/fcntl03.c winsup/testsuite/winsup.api/ltp/fcntl04.c winsup/testsuite/winsup.api/ltp/fcntl05.c winsup/testsuite/winsup.api/ltp/fcntl07.c winsup/testsuite/winsup.api/ltp/fcntl07B.c winsup/testsuite/winsup.api/ltp/fcntl08.c winsup/testsuite/winsup.api/ltp/fcntl09.c winsup/testsuite/winsup.api/ltp/fcntl10.c winsup/testsuite/winsup.api/ltp/fork01.c winsup/testsuite/winsup.api/ltp/fork02.c winsup/testsuite/winsup.api/ltp/fork03.c winsup/testsuite/winsup.api/ltp/fork04.c winsup/testsuite/winsup.api/ltp/fork06.c winsup/testsuite/winsup.api/ltp/fork07.c winsup/testsuite/winsup.api/ltp/fork09.c winsup/testsuite/winsup.api/ltp/fork10.c winsup/testsuite/winsup.api/ltp/fork11.c winsup/testsuite/winsup.api/ltp/fpathconf01.c winsup/testsuite/winsup.api/ltp/fstat01.c winsup/testsuite/winsup.api/ltp/fstat02.c winsup/testsuite/winsup.api/ltp/fstat03.c winsup/testsuite/winsup.api/ltp/fstat04.c winsup/testsuite/winsup.api/ltp/fsync01.c winsup/testsuite/winsup.api/ltp/ftruncate01.c winsup/testsuite/winsup.api/ltp/ftruncate02.c winsup/testsuite/winsup.api/ltp/ftruncate03.c winsup/testsuite/winsup.api/ltp/getegid01.c winsup/testsuite/winsup.api/ltp/geteuid01.c winsup/testsuite/winsup.api/ltp/getgid01.c winsup/testsuite/winsup.api/ltp/getgid02.c winsup/testsuite/winsup.api/ltp/getgid03.c winsup/testsuite/winsup.api/ltp/getgroups01.c winsup/testsuite/winsup.api/ltp/getgroups02.c winsup/testsuite/winsup.api/ltp/gethostid01.c winsup/testsuite/winsup.api/ltp/gethostname01.c winsup/testsuite/winsup.api/ltp/getpgid01.c winsup/testsuite/winsup.api/ltp/getpgid02.c winsup/testsuite/winsup.api/ltp/getpgrp01.c winsup/testsuite/winsup.api/ltp/getpid01.c winsup/testsuite/winsup.api/ltp/getpid02.c winsup/testsuite/winsup.api/ltp/getppid01.c winsup/testsuite/winsup.api/ltp/getppid02.c winsup/testsuite/winsup.api/ltp/getuid01.c winsup/testsuite/winsup.api/ltp/getuid02.c winsup/testsuite/winsup.api/ltp/getuid03.c winsup/testsuite/winsup.api/ltp/kill01.c winsup/testsuite/winsup.api/ltp/kill02.c winsup/testsuite/winsup.api/ltp/kill03.c winsup/testsuite/winsup.api/ltp/kill04.c winsup/testsuite/winsup.api/ltp/kill09.c winsup/testsuite/winsup.api/ltp/link02.c winsup/testsuite/winsup.api/ltp/link03.c winsup/testsuite/winsup.api/ltp/link04.c winsup/testsuite/winsup.api/ltp/link05.c winsup/testsuite/winsup.api/ltp/lseek01.c winsup/testsuite/winsup.api/ltp/lseek02.c winsup/testsuite/winsup.api/ltp/lseek03.c winsup/testsuite/winsup.api/ltp/lseek04.c winsup/testsuite/winsup.api/ltp/lseek05.c winsup/testsuite/winsup.api/ltp/lseek06.c winsup/testsuite/winsup.api/ltp/lseek07.c winsup/testsuite/winsup.api/ltp/lseek08.c winsup/testsuite/winsup.api/ltp/lseek09.c winsup/testsuite/winsup.api/ltp/lseek10.c winsup/testsuite/winsup.api/ltp/lstat02.c winsup/testsuite/winsup.api/ltp/mkdir01.c winsup/testsuite/winsup.api/ltp/mkdir08.c winsup/testsuite/winsup.api/ltp/mknod01.c winsup/testsuite/winsup.api/ltp/mmap001.c winsup/testsuite/winsup.api/ltp/mmap02.c winsup/testsuite/winsup.api/ltp/mmap03.c winsup/testsuite/winsup.api/ltp/mmap04.c winsup/testsuite/winsup.api/ltp/mmap05.c winsup/testsuite/winsup.api/ltp/mmap06.c winsup/testsuite/winsup.api/ltp/mmap07.c winsup/testsuite/winsup.api/ltp/mmap08.c winsup/testsuite/winsup.api/ltp/munmap01.c winsup/testsuite/winsup.api/ltp/munmap02.c winsup/testsuite/winsup.api/ltp/nice05.c winsup/testsuite/winsup.api/ltp/open02.c winsup/testsuite/winsup.api/ltp/open03.c winsup/testsuite/winsup.api/ltp/pathconf01.c winsup/testsuite/winsup.api/ltp/pause01.c winsup/testsuite/winsup.api/ltp/pipe01.c winsup/testsuite/winsup.api/ltp/pipe08.c winsup/testsuite/winsup.api/ltp/pipe09.c winsup/testsuite/winsup.api/ltp/pipe10.c winsup/testsuite/winsup.api/ltp/pipe11.c winsup/testsuite/winsup.api/ltp/poll01.c winsup/testsuite/winsup.api/ltp/read01.c winsup/testsuite/winsup.api/ltp/read04.c winsup/testsuite/winsup.api/ltp/readdir01.c winsup/testsuite/winsup.api/ltp/readlink01.c winsup/testsuite/winsup.api/ltp/readlink02.c winsup/testsuite/winsup.api/ltp/readlink03.c winsup/testsuite/winsup.api/ltp/rename01.c winsup/testsuite/winsup.api/ltp/rename02.c winsup/testsuite/winsup.api/ltp/rename08.c winsup/testsuite/winsup.api/ltp/rename10.c winsup/testsuite/winsup.api/ltp/rmdir01.c winsup/testsuite/winsup.api/ltp/rmdir04.c winsup/testsuite/winsup.api/ltp/rmdir05.c winsup/testsuite/winsup.api/ltp/sbrk01.c winsup/testsuite/winsup.api/ltp/select01.c winsup/testsuite/winsup.api/ltp/select02.c winsup/testsuite/winsup.api/ltp/select03.c winsup/testsuite/winsup.api/ltp/setgid01.c winsup/testsuite/winsup.api/ltp/setgroups01.c winsup/testsuite/winsup.api/ltp/setpgid01.c winsup/testsuite/winsup.api/ltp/setregid01.c winsup/testsuite/winsup.api/ltp/setreuid01.c winsup/testsuite/winsup.api/ltp/setuid01.c winsup/testsuite/winsup.api/ltp/setuid02.c winsup/testsuite/winsup.api/ltp/signal03.c winsup/testsuite/winsup.api/ltp/stat01.c winsup/testsuite/winsup.api/ltp/stat02.c winsup/testsuite/winsup.api/ltp/stat03.c winsup/testsuite/winsup.api/ltp/stat05.c winsup/testsuite/winsup.api/ltp/stat06.c winsup/testsuite/winsup.api/ltp/symlink01.c winsup/testsuite/winsup.api/ltp/symlink02.c winsup/testsuite/winsup.api/ltp/symlink03.c winsup/testsuite/winsup.api/ltp/symlink04.c winsup/testsuite/winsup.api/ltp/symlink05.c winsup/testsuite/winsup.api/ltp/sync01.c winsup/testsuite/winsup.api/ltp/sync02.c winsup/testsuite/winsup.api/ltp/time01.c winsup/testsuite/winsup.api/ltp/time02.c winsup/testsuite/winsup.api/ltp/times01.c winsup/testsuite/winsup.api/ltp/times02.c winsup/testsuite/winsup.api/ltp/times03.c winsup/testsuite/winsup.api/ltp/truncate01.c winsup/testsuite/winsup.api/ltp/truncate02.c winsup/testsuite/winsup.api/ltp/ulimit01.c winsup/testsuite/winsup.api/ltp/umask01.c winsup/testsuite/winsup.api/ltp/umask02.c winsup/testsuite/winsup.api/ltp/umask03.c winsup/testsuite/winsup.api/ltp/uname01.c winsup/testsuite/winsup.api/ltp/unlink05.c winsup/testsuite/winsup.api/ltp/unlink06.c winsup/testsuite/winsup.api/ltp/unlink07.c winsup/testsuite/winsup.api/ltp/unlink08.c winsup/testsuite/winsup.api/ltp/vfork01.c winsup/testsuite/winsup.api/ltp/wait02.c winsup/testsuite/winsup.api/ltp/wait401.c winsup/testsuite/winsup.api/ltp/wait402.c winsup/testsuite/winsup.api/ltp/write01.c winsup/testsuite/winsup.api/ltp/write02.c winsup/testsuite/winsup.api/ltp/write03.c winsup/testsuite/winsup.api/mmaptest01.c winsup/testsuite/winsup.api/mmaptest02.c winsup/testsuite/winsup.api/mmaptest03.c winsup/testsuite/winsup.api/mmaptest04.c winsup/testsuite/winsup.api/msgtest.c winsup/testsuite/winsup.api/nullgetcwd.c winsup/testsuite/winsup.api/pthread/cancel1.c winsup/testsuite/winsup.api/pthread/cancel10.c winsup/testsuite/winsup.api/pthread/cancel11.c winsup/testsuite/winsup.api/pthread/cancel12.c winsup/testsuite/winsup.api/pthread/cancel2.c winsup/testsuite/winsup.api/pthread/cancel3.c winsup/testsuite/winsup.api/pthread/cancel4.c winsup/testsuite/winsup.api/pthread/cancel5.c winsup/testsuite/winsup.api/pthread/cancel6.c winsup/testsuite/winsup.api/pthread/cancel7.c winsup/testsuite/winsup.api/pthread/cancel8.c winsup/testsuite/winsup.api/pthread/cancel9.c winsup/testsuite/winsup.api/pthread/cleanup2.c winsup/testsuite/winsup.api/pthread/cleanup3.c winsup/testsuite/winsup.api/pthread/condvar1.c winsup/testsuite/winsup.api/pthread/condvar2.c winsup/testsuite/winsup.api/pthread/condvar2_1.c winsup/testsuite/winsup.api/pthread/condvar3.c winsup/testsuite/winsup.api/pthread/condvar3_1.c winsup/testsuite/winsup.api/pthread/condvar3_2.c winsup/testsuite/winsup.api/pthread/condvar3_3.c winsup/testsuite/winsup.api/pthread/condvar4.c winsup/testsuite/winsup.api/pthread/condvar5.c winsup/testsuite/winsup.api/pthread/condvar6.c winsup/testsuite/winsup.api/pthread/condvar7.c winsup/testsuite/winsup.api/pthread/condvar8.c winsup/testsuite/winsup.api/pthread/condvar9.c winsup/testsuite/winsup.api/pthread/count1.c winsup/testsuite/winsup.api/pthread/create1.c winsup/testsuite/winsup.api/pthread/create2.c winsup/testsuite/winsup.api/pthread/equal1.c winsup/testsuite/winsup.api/pthread/exit1.c winsup/testsuite/winsup.api/pthread/exit2.c winsup/testsuite/winsup.api/pthread/exit3.c winsup/testsuite/winsup.api/pthread/inherit1.c winsup/testsuite/winsup.api/pthread/join0.c winsup/testsuite/winsup.api/pthread/join1.c winsup/testsuite/winsup.api/pthread/join2.c winsup/testsuite/winsup.api/pthread/mainthreadexits.c winsup/testsuite/winsup.api/pthread/mutex1.c winsup/testsuite/winsup.api/pthread/mutex1d.c winsup/testsuite/winsup.api/pthread/mutex1e.c winsup/testsuite/winsup.api/pthread/mutex1n.c winsup/testsuite/winsup.api/pthread/mutex1r.c winsup/testsuite/winsup.api/pthread/mutex2.c winsup/testsuite/winsup.api/pthread/mutex3.c winsup/testsuite/winsup.api/pthread/mutex4.c winsup/testsuite/winsup.api/pthread/mutex5.c winsup/testsuite/winsup.api/pthread/mutex6d.c winsup/testsuite/winsup.api/pthread/mutex6e.c winsup/testsuite/winsup.api/pthread/mutex6n.c winsup/testsuite/winsup.api/pthread/mutex6r.c winsup/testsuite/winsup.api/pthread/mutex7.c winsup/testsuite/winsup.api/pthread/mutex7d.c winsup/testsuite/winsup.api/pthread/mutex7e.c winsup/testsuite/winsup.api/pthread/mutex7n.c winsup/testsuite/winsup.api/pthread/mutex7r.c winsup/testsuite/winsup.api/pthread/mutex8e.c winsup/testsuite/winsup.api/pthread/mutex8n.c winsup/testsuite/winsup.api/pthread/mutex8r.c winsup/testsuite/winsup.api/pthread/once1.c winsup/testsuite/winsup.api/pthread/priority1.c winsup/testsuite/winsup.api/pthread/priority2.c winsup/testsuite/winsup.api/pthread/rwlock1.c winsup/testsuite/winsup.api/pthread/rwlock2.c winsup/testsuite/winsup.api/pthread/rwlock3.c winsup/testsuite/winsup.api/pthread/rwlock4.c winsup/testsuite/winsup.api/pthread/rwlock5.c winsup/testsuite/winsup.api/pthread/rwlock6.c winsup/testsuite/winsup.api/pthread/rwlock7.c winsup/testsuite/winsup.api/pthread/self1.c winsup/testsuite/winsup.api/pthread/self2.c winsup/testsuite/winsup.api/pthread/test.h winsup/testsuite/winsup.api/pthread/threadidafterfork.c winsup/testsuite/winsup.api/pthread/tsd1.c winsup/testsuite/winsup.api/resethand.c winsup/testsuite/winsup.api/samples/sample-fail.c winsup/testsuite/winsup.api/samples/sample-miscompile.c winsup/testsuite/winsup.api/samples/sample-pass.c winsup/testsuite/winsup.api/semtest.c winsup/testsuite/winsup.api/shmtest.c winsup/testsuite/winsup.api/sigchld.c winsup/testsuite/winsup.api/signal-into-win32-api.c winsup/testsuite/winsup.api/systemcall.c winsup/testsuite/winsup.api/user_malloc.c winsup/testsuite/winsup.api/waitpid.c winsup/testsuite/winsup.api/winsup.exp winsup/utils/COPYING.dumper winsup/utils/ChangeLog winsup/utils/ChangeLog-2000 winsup/utils/Makefile.in winsup/utils/aclocal.m4 winsup/utils/bloda.cc winsup/utils/configure winsup/utils/configure.in winsup/utils/cygcheck.cc winsup/utils/cygpath.cc winsup/utils/dump_setup.cc winsup/utils/dumper.cc winsup/utils/dumper.h winsup/utils/getfacl.c winsup/utils/kill.cc winsup/utils/mingw winsup/utils/mkgroup.c winsup/utils/mkpasswd.c winsup/utils/module_info.cc winsup/utils/mount.cc winsup/utils/parse_pe.cc winsup/utils/passwd.c winsup/utils/path.cc winsup/utils/path.h winsup/utils/ps.cc winsup/utils/regtool.cc winsup/utils/setfacl.c winsup/utils/setmetamode.c winsup/utils/ssp.c winsup/utils/ssp.txt winsup/utils/strace.cc winsup/utils/testsuite.cc winsup/utils/testsuite.h winsup/utils/umount.cc winsup/utils/utils.sgml winsup/w32api/CONTRIBUTIONS winsup/w32api/ChangeLog winsup/w32api/Makefile.in winsup/w32api/README.w32api winsup/w32api/TODO winsup/w32api/aclocal.m4 winsup/w32api/config.guess winsup/w32api/config.sub winsup/w32api/configure winsup/w32api/configure.in winsup/w32api/include/GL/gl.h winsup/w32api/include/GL/glext.h winsup/w32api/include/GL/glu.h winsup/w32api/include/accctrl.h winsup/w32api/include/aclapi.h winsup/w32api/include/aclui.h winsup/w32api/include/adsprop.h winsup/w32api/include/afxres.h winsup/w32api/include/amaudio.h winsup/w32api/include/amvideo.h winsup/w32api/include/audevcod.h winsup/w32api/include/aviriff.h winsup/w32api/include/aygshell.h winsup/w32api/include/basetsd.h winsup/w32api/include/basetyps.h winsup/w32api/include/bdatypes.h winsup/w32api/include/cderr.h winsup/w32api/include/cguid.h winsup/w32api/include/cmnquery.h winsup/w32api/include/comcat.h winsup/w32api/include/commctrl.h winsup/w32api/include/commdlg.h winsup/w32api/include/control.h winsup/w32api/include/cpl.h winsup/w32api/include/cplext.h winsup/w32api/include/custcntl.h winsup/w32api/include/dbt.h winsup/w32api/include/dde.h winsup/w32api/include/ddeml.h winsup/w32api/include/ddk/atm.h winsup/w32api/include/ddk/batclass.h winsup/w32api/include/ddk/cfg.h winsup/w32api/include/ddk/cfgmgr32.h winsup/w32api/include/ddk/d4drvif.h winsup/w32api/include/ddk/d4iface.h winsup/w32api/include/ddk/ddkmapi.h winsup/w32api/include/ddk/hidclass.h winsup/w32api/include/ddk/hidpi.h winsup/w32api/include/ddk/hidsdi.h winsup/w32api/include/ddk/hidusage.h winsup/w32api/include/ddk/kbdmou.h winsup/w32api/include/ddk/mcd.h winsup/w32api/include/ddk/miniport.h winsup/w32api/include/ddk/minitape.h winsup/w32api/include/ddk/mountdev.h winsup/w32api/include/ddk/mountmgr.h winsup/w32api/include/ddk/ndis.h winsup/w32api/include/ddk/ndisguid.h winsup/w32api/include/ddk/ndistapi.h winsup/w32api/include/ddk/ndiswan.h winsup/w32api/include/ddk/netevent.h winsup/w32api/include/ddk/netpnp.h winsup/w32api/include/ddk/newdev.h winsup/w32api/include/ddk/ntapi.h winsup/w32api/include/ddk/ntdd8042.h winsup/w32api/include/ddk/ntddbeep.h winsup/w32api/include/ddk/ntddcdrm.h winsup/w32api/include/ddk/ntddcdvd.h winsup/w32api/include/ddk/ntddchgr.h winsup/w32api/include/ddk/ntdddisk.h winsup/w32api/include/ddk/ntddk.h winsup/w32api/include/ddk/ntddkbd.h winsup/w32api/include/ddk/ntddmou.h winsup/w32api/include/ddk/ntddndis.h winsup/w32api/include/ddk/ntddpar.h winsup/w32api/include/ddk/ntddpcm.h winsup/w32api/include/ddk/ntddscsi.h winsup/w32api/include/ddk/ntddser.h winsup/w32api/include/ddk/ntddstor.h winsup/w32api/include/ddk/ntddtape.h winsup/w32api/include/ddk/ntddtdi.h winsup/w32api/include/ddk/ntddvdeo.h winsup/w32api/include/ddk/ntddvol.h winsup/w32api/include/ddk/ntifs.h winsup/w32api/include/ddk/ntpoapi.h winsup/w32api/include/ddk/ntstatus.h winsup/w32api/include/ddk/parallel.h winsup/w32api/include/ddk/pfhook.h winsup/w32api/include/ddk/poclass.h winsup/w32api/include/ddk/scsi.h winsup/w32api/include/ddk/scsiscan.h winsup/w32api/include/ddk/scsiwmi.h winsup/w32api/include/ddk/smbus.h winsup/w32api/include/ddk/srb.h winsup/w32api/include/ddk/storport.h winsup/w32api/include/ddk/tdi.h winsup/w32api/include/ddk/tdiinfo.h winsup/w32api/include/ddk/tdikrnl.h winsup/w32api/include/ddk/tdistat.h winsup/w32api/include/ddk/tvout.h winsup/w32api/include/ddk/upssvc.h winsup/w32api/include/ddk/usb.h winsup/w32api/include/ddk/usb100.h winsup/w32api/include/ddk/usbcamdi.h winsup/w32api/include/ddk/usbdi.h winsup/w32api/include/ddk/usbioctl.h winsup/w32api/include/ddk/usbiodef.h winsup/w32api/include/ddk/usbscan.h winsup/w32api/include/ddk/usbuser.h winsup/w32api/include/ddk/video.h winsup/w32api/include/ddk/videoagp.h winsup/w32api/include/ddk/win2k.h winsup/w32api/include/ddk/winddi.h winsup/w32api/include/ddk/winddk.h winsup/w32api/include/ddk/winnt4.h winsup/w32api/include/ddk/winxp.h winsup/w32api/include/ddk/ws2san.h winsup/w32api/include/ddk/xfilter.h winsup/w32api/include/devguid.h winsup/w32api/include/dhcpcsdk.h winsup/w32api/include/directx/d3d9.h winsup/w32api/include/directx/d3d9caps.h winsup/w32api/include/directx/d3d9types.h winsup/w32api/include/directx/dxerr8.h winsup/w32api/include/directx/dxerr9.h winsup/w32api/include/dlgs.h winsup/w32api/include/docobj.h winsup/w32api/include/dsadmin.h winsup/w32api/include/dsclient.h winsup/w32api/include/dsgetdc.h winsup/w32api/include/dshow.h winsup/w32api/include/dsquery.h winsup/w32api/include/dsrole.h winsup/w32api/include/dvdevcod.h winsup/w32api/include/dvdmedia.h winsup/w32api/include/edevdefs.h winsup/w32api/include/errorrep.h winsup/w32api/include/errors.h winsup/w32api/include/evcode.h winsup/w32api/include/exdisp.h winsup/w32api/include/exdispid.h winsup/w32api/include/fltdefs.h winsup/w32api/include/httpext.h winsup/w32api/include/icm.h winsup/w32api/include/idispids.h winsup/w32api/include/il21dec.h winsup/w32api/include/imagehlp.h winsup/w32api/include/imm.h winsup/w32api/include/initguid.h winsup/w32api/include/intshcut.h winsup/w32api/include/ipexport.h winsup/w32api/include/iphlpapi.h winsup/w32api/include/ipifcons.h winsup/w32api/include/ipinfoid.h winsup/w32api/include/iprtrmib.h winsup/w32api/include/iptypes.h winsup/w32api/include/ipxconst.h winsup/w32api/include/ipxrtdef.h winsup/w32api/include/ipxtfflt.h winsup/w32api/include/isguids.h winsup/w32api/include/ks.h winsup/w32api/include/ksmedia.h winsup/w32api/include/largeint.h winsup/w32api/include/lm.h winsup/w32api/include/lmaccess.h winsup/w32api/include/lmalert.h winsup/w32api/include/lmapibuf.h winsup/w32api/include/lmat.h winsup/w32api/include/lmaudit.h winsup/w32api/include/lmbrowsr.h winsup/w32api/include/lmchdev.h winsup/w32api/include/lmconfig.h winsup/w32api/include/lmcons.h winsup/w32api/include/lmerr.h winsup/w32api/include/lmerrlog.h winsup/w32api/include/lmmsg.h winsup/w32api/include/lmremutl.h winsup/w32api/include/lmrepl.h winsup/w32api/include/lmserver.h winsup/w32api/include/lmshare.h winsup/w32api/include/lmsname.h winsup/w32api/include/lmstats.h winsup/w32api/include/lmsvc.h winsup/w32api/include/lmuse.h winsup/w32api/include/lmuseflg.h winsup/w32api/include/lmwksta.h winsup/w32api/include/lzexpand.h winsup/w32api/include/mapi.h winsup/w32api/include/mciavi.h winsup/w32api/include/mcx.h winsup/w32api/include/mgm.h winsup/w32api/include/mgmtapi.h winsup/w32api/include/mlang.h winsup/w32api/include/mmreg.h winsup/w32api/include/mmsystem.h winsup/w32api/include/mpegtype.h winsup/w32api/include/mprapi.h winsup/w32api/include/mq.h winsup/w32api/include/msacm.h winsup/w32api/include/mshtml.h winsup/w32api/include/mswsock.h winsup/w32api/include/nb30.h winsup/w32api/include/nddeapi.h winsup/w32api/include/nspapi.h winsup/w32api/include/ntdef.h winsup/w32api/include/ntdll.h winsup/w32api/include/ntdsapi.h winsup/w32api/include/ntdsbcli.h winsup/w32api/include/ntldap.h winsup/w32api/include/ntsecapi.h winsup/w32api/include/ntsecpkg.h winsup/w32api/include/oaidl.h winsup/w32api/include/objbase.h winsup/w32api/include/objfwd.h winsup/w32api/include/objidl.h winsup/w32api/include/objsafe.h winsup/w32api/include/objsel.h winsup/w32api/include/ocidl.h winsup/w32api/include/odbcinst.h winsup/w32api/include/ole.h winsup/w32api/include/ole2.h winsup/w32api/include/ole2ver.h winsup/w32api/include/oleacc.h winsup/w32api/include/oleauto.h winsup/w32api/include/olectl.h winsup/w32api/include/olectlid.h winsup/w32api/include/oledlg.h winsup/w32api/include/oleidl.h winsup/w32api/include/pbt.h winsup/w32api/include/poppack.h winsup/w32api/include/powrprof.h winsup/w32api/include/prsht.h winsup/w32api/include/psapi.h winsup/w32api/include/pshpack1.h winsup/w32api/include/pshpack2.h winsup/w32api/include/pshpack4.h winsup/w32api/include/pshpack8.h winsup/w32api/include/qedit.h winsup/w32api/include/rapi.h winsup/w32api/include/ras.h winsup/w32api/include/rasdlg.h winsup/w32api/include/raserror.h winsup/w32api/include/rassapi.h winsup/w32api/include/reason.h winsup/w32api/include/regstr.h winsup/w32api/include/richedit.h winsup/w32api/include/richole.h winsup/w32api/include/routprot.h winsup/w32api/include/rpc.h winsup/w32api/include/rpcdce.h winsup/w32api/include/rpcdce2.h winsup/w32api/include/rpcdcep.h winsup/w32api/include/rpcndr.h winsup/w32api/include/rpcnsi.h winsup/w32api/include/rpcnsip.h winsup/w32api/include/rpcnterr.h winsup/w32api/include/rpcproxy.h winsup/w32api/include/rtutils.h winsup/w32api/include/schannel.h winsup/w32api/include/schnlsp.h winsup/w32api/include/scrnsave.h winsup/w32api/include/sddl.h winsup/w32api/include/secext.h winsup/w32api/include/security.h winsup/w32api/include/servprov.h winsup/w32api/include/setupapi.h winsup/w32api/include/shellapi.h winsup/w32api/include/shldisp.h winsup/w32api/include/shlguid.h winsup/w32api/include/shlobj.h winsup/w32api/include/shlwapi.h winsup/w32api/include/snmp.h winsup/w32api/include/specstrings.h winsup/w32api/include/sql.h winsup/w32api/include/sqlext.h winsup/w32api/include/sqltypes.h winsup/w32api/include/sqlucode.h winsup/w32api/include/sspi.h winsup/w32api/include/stm.h winsup/w32api/include/strmif.h winsup/w32api/include/subauth.h winsup/w32api/include/svcguid.h winsup/w32api/include/tlhelp32.h winsup/w32api/include/tmschema.h winsup/w32api/include/unknwn.h winsup/w32api/include/userenv.h winsup/w32api/include/usp10.h winsup/w32api/include/uxtheme.h winsup/w32api/include/vfw.h winsup/w32api/include/vidcap.h winsup/w32api/include/vmr9.h winsup/w32api/include/vptype.h winsup/w32api/include/w32api.h winsup/w32api/include/winable.h winsup/w32api/include/winbase.h winsup/w32api/include/winber.h winsup/w32api/include/wincon.h winsup/w32api/include/wincrypt.h winsup/w32api/include/windef.h winsup/w32api/include/windns.h winsup/w32api/include/windows.h winsup/w32api/include/windowsx.h winsup/w32api/include/winerror.h winsup/w32api/include/wingdi.h winsup/w32api/include/wininet.h winsup/w32api/include/winioctl.h winsup/w32api/include/winldap.h winsup/w32api/include/winnetwk.h winsup/w32api/include/winnls.h winsup/w32api/include/winnt.h winsup/w32api/include/winperf.h winsup/w32api/include/winreg.h winsup/w32api/include/winresrc.h winsup/w32api/include/winsnmp.h winsup/w32api/include/winsock.h winsup/w32api/include/winsock2.h winsup/w32api/include/winspool.h winsup/w32api/include/winsvc.h winsup/w32api/include/winuser.h winsup/w32api/include/winver.h winsup/w32api/include/ws2spi.h winsup/w32api/include/ws2tcpip.h winsup/w32api/include/wsahelp.h winsup/w32api/include/wsipx.h winsup/w32api/include/wsnetbs.h winsup/w32api/include/wtsapi32.h winsup/w32api/include/wtypes.h winsup/w32api/include/xprtdefs.h winsup/w32api/include/zmouse.h winsup/w32api/install-sh winsup/w32api/lib/Makefile.in winsup/w32api/lib/aclui.def winsup/w32api/lib/advapi32.def winsup/w32api/lib/ativscp-uuid.c winsup/w32api/lib/avicap32.def winsup/w32api/lib/avifil32.def winsup/w32api/lib/bthprops.def winsup/w32api/lib/cap.def winsup/w32api/lib/cguid-uuid.c winsup/w32api/lib/comcat-uuid.c winsup/w32api/lib/comctl32.def winsup/w32api/lib/comdlg32.def winsup/w32api/lib/crypt32.def winsup/w32api/lib/ctl3d32.def winsup/w32api/lib/ddk/Makefile.in winsup/w32api/lib/ddk/apcups.def winsup/w32api/lib/ddk/cfgmgr32.def winsup/w32api/lib/ddk/dxapi.def winsup/w32api/lib/ddk/hal.def winsup/w32api/lib/ddk/hid.def winsup/w32api/lib/ddk/hidparse.def winsup/w32api/lib/ddk/mcd.def winsup/w32api/lib/ddk/ndis.def winsup/w32api/lib/ddk/newdev.def winsup/w32api/lib/ddk/ntoskrnl.def winsup/w32api/lib/ddk/scsiport.def winsup/w32api/lib/ddk/tdi.def winsup/w32api/lib/ddk/usbcamd.def winsup/w32api/lib/ddk/usbcamd2.def winsup/w32api/lib/ddk/videoprt.def winsup/w32api/lib/ddk/win32k.def winsup/w32api/lib/devguid.c winsup/w32api/lib/dhcpcsvc.def winsup/w32api/lib/directx/Makefile.in winsup/w32api/lib/directx/d3d8.def winsup/w32api/lib/directx/d3d9.def winsup/w32api/lib/directx/d3dim.def winsup/w32api/lib/directx/d3drm.def winsup/w32api/lib/directx/d3dx8d.def winsup/w32api/lib/directx/d3dx9d.def winsup/w32api/lib/directx/d3dxof.def winsup/w32api/lib/directx/ddraw.def winsup/w32api/lib/directx/dinput.def winsup/w32api/lib/directx/dinput8.def winsup/w32api/lib/directx/dinput_joy.c winsup/w32api/lib/directx/dinput_joy2.c winsup/w32api/lib/directx/dinput_kbd.c winsup/w32api/lib/directx/dinput_mouse.c winsup/w32api/lib/directx/dinput_mouse2.c winsup/w32api/lib/directx/dinput_private.h winsup/w32api/lib/directx/dmoguids.c winsup/w32api/lib/directx/dplayx.def winsup/w32api/lib/directx/dpnaddr.def winsup/w32api/lib/directx/dpnet.def winsup/w32api/lib/directx/dpnlobby.def winsup/w32api/lib/directx/dpvoice.def winsup/w32api/lib/directx/dsetup.def winsup/w32api/lib/directx/dsound.def winsup/w32api/lib/directx/dxerr.c winsup/w32api/lib/directx/dxerr8.c winsup/w32api/lib/directx/dxerr8w.c winsup/w32api/lib/directx/dxerr9.c winsup/w32api/lib/directx/dxerr9w.c winsup/w32api/lib/directx/dxguid.c winsup/w32api/lib/directx/ksproxy.def winsup/w32api/lib/directx/ksuser.c winsup/w32api/lib/directx/ksuser.def winsup/w32api/lib/directx/msdmo.def winsup/w32api/lib/directx/strmiids.c winsup/w32api/lib/directx/test.c winsup/w32api/lib/dlcapi.def winsup/w32api/lib/dnsapi.def winsup/w32api/lib/docobj-uuid.c winsup/w32api/lib/exdisp-uuid.c winsup/w32api/lib/extras-uuid.c winsup/w32api/lib/faultrep.def winsup/w32api/lib/gdi32.def winsup/w32api/lib/glaux.def winsup/w32api/lib/glu32.def winsup/w32api/lib/glut.def winsup/w32api/lib/glut32.def winsup/w32api/lib/hlguids-uuid.c winsup/w32api/lib/hlink-uuid.c winsup/w32api/lib/icmui.def winsup/w32api/lib/igmpagnt.def winsup/w32api/lib/imagehlp.def winsup/w32api/lib/imm32.def winsup/w32api/lib/iphlpapi.def winsup/w32api/lib/kernel32.def winsup/w32api/lib/largeint.c winsup/w32api/lib/lz32.def winsup/w32api/lib/mapi32.def winsup/w32api/lib/mfcuia32.def winsup/w32api/lib/mgmtapi.def winsup/w32api/lib/mlang-uuid.c winsup/w32api/lib/mpr.def winsup/w32api/lib/mprapi.def winsup/w32api/lib/mqrt.def winsup/w32api/lib/msacm32.def winsup/w32api/lib/mscms.def winsup/w32api/lib/mshtml-uuid.c winsup/w32api/lib/msimg32.def winsup/w32api/lib/msvcp60.def winsup/w32api/lib/msvfw32.def winsup/w32api/lib/mswsock.def winsup/w32api/lib/msxml-uuid.c winsup/w32api/lib/nddeapi.def winsup/w32api/lib/netapi32.def winsup/w32api/lib/ntdll.def winsup/w32api/lib/oaidl-uuid.c winsup/w32api/lib/objidl-uuid.c winsup/w32api/lib/objsafe-uuid.c winsup/w32api/lib/ocidl-uuid.c winsup/w32api/lib/odbc32.def winsup/w32api/lib/odbccp32.def winsup/w32api/lib/ole32.def winsup/w32api/lib/oleacc-uuid.c winsup/w32api/lib/oleacc.def winsup/w32api/lib/oleaut32.def winsup/w32api/lib/olecli32.def winsup/w32api/lib/olectlid-uuid.c winsup/w32api/lib/oledlg.def winsup/w32api/lib/oleidl-uuid.c winsup/w32api/lib/olepro32.def winsup/w32api/lib/olesvr32.def winsup/w32api/lib/opengl32.def winsup/w32api/lib/penwin32.def winsup/w32api/lib/pkpd32.def winsup/w32api/lib/power-uuid.c winsup/w32api/lib/powrprof.def winsup/w32api/lib/psapi.def winsup/w32api/lib/quartz.def winsup/w32api/lib/rapi.def winsup/w32api/lib/rasapi32.def winsup/w32api/lib/rasdlg.def winsup/w32api/lib/res.rc winsup/w32api/lib/rpcdce4.def winsup/w32api/lib/rpcns4.def winsup/w32api/lib/rpcrt4.def winsup/w32api/lib/rtm.def winsup/w32api/lib/rtutils.def winsup/w32api/lib/scrnsave.c winsup/w32api/lib/secur32.def winsup/w32api/lib/servprov-uuid.c winsup/w32api/lib/setupapi.def winsup/w32api/lib/shell32.c winsup/w32api/lib/shell32.def winsup/w32api/lib/shfolder.def winsup/w32api/lib/shlwapi.def winsup/w32api/lib/snmpapi.def winsup/w32api/lib/svrapi.def winsup/w32api/lib/tapi32.def winsup/w32api/lib/test.c winsup/w32api/lib/th32.def winsup/w32api/lib/thunk32.def winsup/w32api/lib/unknwn-uuid.c winsup/w32api/lib/url.def winsup/w32api/lib/urlmon-uuid.c winsup/w32api/lib/user32.def winsup/w32api/lib/userenv.def winsup/w32api/lib/usp10.def winsup/w32api/lib/uxtheme.def winsup/w32api/lib/vdmdbg.def winsup/w32api/lib/version.def winsup/w32api/lib/vfw32.mri winsup/w32api/lib/win32spl.def winsup/w32api/lib/wininet.def winsup/w32api/lib/winmm.def winsup/w32api/lib/winspool.def winsup/w32api/lib/winstrm.def winsup/w32api/lib/wldap32.def winsup/w32api/lib/wow32.def winsup/w32api/lib/ws2_32.c winsup/w32api/lib/ws2_32.def winsup/w32api/lib/wsnmp32.def winsup/w32api/lib/wsock32.def winsup/w32api/lib/wst.def winsup/w32api/lib/wtsapi32.def
author: cvs2svn <> 2008-11-19 18:25:20 +0000
committer: cvs2svn <> 2008-11-19 18:25:20 +0000
commit: ee40f8d491c436074cc576643f9d988b67319e8a (patch)
tree: 2497a7463a68744ea4f715f0ac57f7798813d92d /libgloss/mips
parent: 7562a08bb4d038699468d4c592a9f856f8e36c48 (diff)
download: cygnal-ee40f8d491c436074cc576643f9d988b67319e8a.tar.gz
cygnal-ee40f8d491c436074cc576643f9d988b67319e8a.tar.bz2
cygnal-ee40f8d491c436074cc576643f9d988b67319e8a.zip
45 files changed, 0 insertions, 11368 deletions
diff --git a/libgloss/mips/Makefile.in b/libgloss/mips/Makefile.in
deleted file mode 100644
index 2042e48ec..000000000
--- a/libgloss/mips/Makefile.in
+++ /dev/null
@@ -1,259 +0,0 @@
-# Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000 Cygnus Support
-#
-# The authors hereby grant permission to use, copy, modify, distribute,
-# and license this software and its documentation for any purpose, provided
-# that existing copyright notices are retained in all copies and that this
-# notice is included verbatim in any distributions. No written agreement,
-# license, or royalty fee is required for any of the authorized uses.
-# Modifications to this software may be copyrighted by their authors
-# and need not follow the licensing terms described here, provided that
-# the new terms are clearly indicated on the first page of each file where
-# they apply.
-
-DESTDIR =
-VPATH = @srcdir@
-srcdir = @srcdir@
-objdir = .
-srcroot = $(srcdir)/../..
-objroot = $(objdir)/../..
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-host_alias = @host_alias@
-target_alias = @target_alias@
-program_transform_name = @program_transform_name@
-
-bindir = @bindir@
-libdir = @libdir@
-tooldir = $(exec_prefix)/$(target_alias)
-
-# Multilib support variables.
-# TOP is used instead of MULTI{BUILD,SRC}TOP.
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-SHELL =	/bin/sh
-
-CC = @CC@
-
-#AS = @AS@
-AS = `if [ -f ${objroot}/../gas/as.new ] ; \
-	then echo ${objroot}/../gas/as.new ; \
-	else echo as ; fi`
-
-AR = @AR@
-
-#LD = @LD@
-LD = `if [ -f ${objroot}/../ld/ld.new ] ; \
-	then echo ${objroot}/../ld/ld.new ; \
-	else echo ld ; fi`
-
-RANLIB = @RANLIB@
-
-OBJDUMP = `if [ -f ${objroot}/../binutils/objdump ] ; \
-	then echo ${objroot}/../binutils/objdump ; \
-	else t='$(program_transform_name)'; echo objdump | sed -e $$t ; fi`
-OBJCOPY = `if [ -f ${objroot}/../binutils/objcopy ] ; \
-	then echo ${objroot}/../binutils/objcopy ; \
-	else t='$(program_transform_name)'; echo objcopy | sed -e $$t ; fi`
-
-CRT0 = @crt0@
-PCRT0 = @pcrt0@
-GENOBJS = syscalls.o fstat.o getpid.o isatty.o kill.o \
-	lseek.o print.o putnum.o stat.o unlink.o
-GENOBJS2 = open.o close.o read.o write.o
-IDTOBJS = idtmon.o @part_specific_obj@ ${GENOBJS}
-PMONOBJS = pmon.o @part_specific_obj@ ${GENOBJS}
-LSIOBJS = lsipmon.o @part_specific_obj@ ${GENOBJS}
-DVEOBJS = dvemon.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2}
-JMR3904OBJS = jmr3904-io.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2}
-CFEOBJS = cfe.o cfe_api.o cfe_mem.o @part_specific_obj@ ${GENOBJS} ${GENOBJS2}
-CYGMONOBJS = open.o close.o cygmon.o @part_specific_obj@ ${GENOBJS}
-
-# Nullmon cannot support read and write, but the test cases pull them in via libs
-NULLMONOBJS = nullmon.o @part_specific_obj@ ${GENOBJS}
-
-CFLAGS = -g 
-
-GCC_LDFLAGS = `if [ -d ${objroot}/../gcc ] ; \
-	then echo -L${objroot}/../gcc ; fi`
-
-SCRIPTS = @script_list@
-BSP = @bsp_list@
-
-PART_SPECIFIC_DEFINES = @part_specific_defines@
-
-# Host specific makefile fragment comes in here.
-@host_makefile_frag@
-
-#
-# build a test program for each target board. Just trying to get
-# it to link is a good test, so we ignore all the errors for now.
-#
-
-all: ${CRT0} ${PCRT0} test.o ${BSP}
-
-#
-# here's where we build the board support packages for each target
-#
-mipsidt.o: $(IDTOBJS)
-	${LD} -r $(IDTOBJS) -o $@
-
-mipspmon.o: $(PMONOBJS)
-	${LD} -r $(PMONOBJS) -o $@
-
-mipslsi.o: $(PMONOBJS)
-	${LD} -r $(LSIOBJS) -o $@
-
-libidt.a: $(IDTOBJS)
-	${AR} ${ARFLAGS} $@ $(IDTOBJS)
-	${RANLIB} $@
-
-libpmon.a: $(PMONOBJS)
-	${AR} ${ARFLAGS} $@ $(PMONOBJS)
-	${RANLIB} $@
-
-liblsi.a: $(LSIOBJS)
-	${AR} ${ARFLAGS} $@ $(LSIOBJS)
-	${RANLIB} $@
-
-libdve.a: $(DVEOBJS)
-	${AR} ${ARFLAGS} $@ $(DVEOBJS)
-	${RANLIB} $@
-
-libjmr3904.a: $(JMR3904OBJS)
-	${AR} ${ARFLAGS} $@ $(JMR3904OBJS)
-	${RANLIB} $@
-
-libcygmon.a: $(CYGMONOBJS)
-	${AR} ${ARFLAGS} $@ $(CYGMONOBJS)
-	${RANLIB} $@
-
-libcfe.a: $(CFEOBJS)
-	${AR} ${ARFLAGS} $@ $(CFEOBJS)
-	${RANLIB} $@
-
-# nullmon.a , This is what you want if you want crt0 but NO mon services
-# Supports GDB sim testing, board bringups, ICE operation.
-libnullmon.a: $(NULLMONOBJS)
-	${AR} ${ARFLAGS} $@ $(NULLMONOBJS)
-	${RANLIB} $@
-
-
-# compile a fully linked binary. The -Wl,-T*.ld is for the linker
-# script. By using -Wl, the linker script is put on the proper place
-# in the comand line for ld, and all the symbols will get fully
-# resolved.
-
-test: $(OBJS) ${BSP} pmon-test idt-test cfe-test
-	@echo Done...
-
-dtor.o:  $(srcdir)/dtor.C
-	$(CC) $(CFLAGS_FOR_TARGET) $(INCLUDES) -o $@ -c $<
-dtor.x: dtor.o ${CRT0} ${srcdir}/pmon.ld Makefile libpmon.a
-	${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
-	dtor.o -o $@ $(NEWLIB_LDFLAGS) -N -Wl,-Tpmon.ld
-
-pmon-test.x: test.o ${CRT0} Makefile libpmon.a
-	${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
-	test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tpmon.ld
-pmon-test.srec: pmon-test.x
-	$(OBJCOPY) -O srec pmon-test.x $@
-pmon-test.dis: pmon-test.x
-	@rm -fr pmon-test.dis
-	$(OBJDUMP) -d pmon-test.x > $@
-pmon-test: pmon-test.srec pmon-test.dis
-
-idt-test.x: test.o ${CRT0} Makefile libidt.a
-	${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
-	test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tidt.ld
-idt-test.srec: idt-test.x
-	$(OBJCOPY) -O srec idt-test.x $@
-idt-test.dis: idt-test.x
-	@rm -fr idt-test.dis
-	$(OBJDUMP) -d idt-test.x > $@
-idt-test: idt-test.srec idt-test.dis
-
-cfe-test.x: test.o ${CRT0} Makefile libcfe.a
-	${CC} $(CFLAGS_FOR_TARGET) -L${srcdir} -L${objdir} \
-	test.o -o $@ $(NEWLIB_LDFLAGS) -Wl,-Tcfe.ld
-cfe-test.srec: cfe-test.x
-	$(OBJCOPY) -O srec cfe-test.x $@
-cfe-test.dis: cfe-test.x
-	@rm -fr cfe-test.dis
-	$(OBJDUMP) -d cfe-test.x > $@
-cfe-test: cfe-test.srec cfe-test.dis
-
-doc:	
-
-clean mostlyclean:
-	rm -f a.out core *.i *~ *.o *-test *.srec *.dis *.map *.x
-
-distclean maintainer-clean realclean: clean
-	rm -f Makefile config.status a.out
-
-.PHONY: install info install-info clean-info
-install:
-	@for file in $(CRT0) $(PCRT0) $(BSP); do \
-	  $(INSTALL_DATA) $${file} $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}; \
-	done
-	@for script in ${SCRIPTS}; do\
-	  $(INSTALL_DATA) ${srcdir}/$${script}.ld $(DESTDIR)$(tooldir)/lib${MULTISUBDIR}/$${script}.ld; \
-	done
-
-info:
-install-info:
-clean-info:
-
-test.o:	${srcdir}/test.c
-
-# these are for the BSPs
-crt0.o: ${srcdir}/crt0.S
-pcrt0.o: ${srcdir}/crt0.S
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) -DGCRT0 ${srcdir}/crt0.S -o ${PCRT0}
-crt0_cfe.o: ${srcdir}/crt0_cfe.S
-crt0_cygmon.o: ${srcdir}/crt0_cygmon.S
-idtmon.o: ${srcdir}/idtmon.S
-pmon.o: ${srcdir}/pmon.S
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) $(PART_SPECIFIC_DEFINES) ${srcdir}/pmon.S -o pmon.o
-vr4300.o: ${srcdir}/vr4300.S
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/vr4300.S
-vr5xxx.o: ${srcdir}/vr5xxx.S
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/vr5xxx.S
-lsipmon.o: $(srcdir)/lsipmon.S $(srcdir)/pmon.S
-jmr3904-io.o: ${srcdir}/jmr3904-io.c
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/jmr3904-io.c -o $@
-cfe.o: ${srcdir}/cfe.c ${srcdir}/cfe_api.h
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe.c -o $@
-cfe_api.o: ${srcdir}/cfe_api.c ${srcdir}/cfe_api.h ${srcdir}/cfe_api_int.h
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe_api.c -o $@
-cfe_mem.o: ${srcdir}/cfe_mem.c ${srcdir}/cfe_api.h
-	$(CC) -c $(CFLAGS_FOR_TARGET) $(CFLAGS) ${srcdir}/cfe_mem.c -o $@
-
-# cma101 can not be compiled mips16, if a mips16 version is needed then
-# it will have to be built, then this rule can be scrapped, allowing
-# the implicit rule to run.
-cma101.o: ${srcdir}/cma101.c
-	$(CC) -c $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) $(CFLAGS) -mno-mips16 ${srcdir}/cma101.c
-
-# cygmon can not be compiled as mips16 since it uses the syscall instruction
-cygmon.o: ${srcdir}/cygmon.c
-	$(CC) -c $(CFLAGS_FOR_TARGET) -O2 $(INCLUDES) $(CFLAGS) -mno-mips16 ${srcdir}/cygmon.c
-
-syscalls.o: ${srcdir}/syscalls.c
-
-# target specific makefile fragment comes in here.
-@target_makefile_frag@
-
-Makefile: Makefile.in config.status @host_makefile_frag_path@ @target_makefile_frag_path@
-	$(SHELL) config.status
-
-config.status: configure
-	$(SHELL) config.status --recheck
diff --git a/libgloss/mips/aclocal.m4 b/libgloss/mips/aclocal.m4
deleted file mode 100644
index b6cdfaeb8..000000000
--- a/libgloss/mips/aclocal.m4
+++ /dev/null
@@ -1,344 +0,0 @@
-# generated automatically by aclocal 1.9.5 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
-       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
-       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                   [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-m4_include([../acinclude.m4])
diff --git a/libgloss/mips/array-io.c b/libgloss/mips/array-io.c
deleted file mode 100644
index 5c1d96fa3..000000000
--- a/libgloss/mips/array-io.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* array-io.c -- I/O code for the Array Tech RAID disk controller.
- *
- * Copyright (c) 1995 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-#include "mips.h"
-
-/*
- * outbyte -- shove a byte out the serial port. We wait till the byte 
- */
-int
-outbyte(byte)
-     unsigned char byte;
-{
-  return (PUTCHAR(byte));
-}
-
-/*
- * inbyte -- get a byte from the serial port
- */
-unsigned char
-inbyte()
-{
-  return ((unsigned char)GETCHAR);
-}
-
-/*
- * led_putnum -- print a hex number on the LED. the value of num must be a byte.
- 
- *               The max number 15, since the front panel only has 4 LEDs.
- */
-void
-led_putnum ( num )
-char num;
-{
-  print ("Sorry, unimplemented, using putnum instead\r\n");
-  putnum (num);
-}
-
-/*
- * zylons -- draw a rotating pattern. NOTE: this function never returns.
- */
-void
-zylons()
-{
-  print ("Sorry, unimplemented\r\n");
-}
-
-/*
- * delay -- a really gross, ugly hack for simple time delays
- */
-void
-delay (x)
-     int x;
-{
-  int  y = 17;
-  while (x-- !=0)
-    y = y^2;
-}
diff --git a/libgloss/mips/array.ld b/libgloss/mips/array.ld
deleted file mode 100644
index fc4cc8fc2..000000000
--- a/libgloss/mips/array.ld
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * memory map assumed by prom and standalone system
- *
- * physical     kseg1                   use
- *
- * 0x1fc20000   0xbfc20000
- * to                                   prom text and read-only data
- * 0x1fc00000   0xbfc00000              (in cpu board "prom space")
- *
- * (Top of RAM - 8K) downward           sash and standalone program stack
- *              |                       ( - 8K to preserve kernel message bufs)
- *              V                       (standalone programs grow their stack
- *                                       immediately below sash's stack)
- *
- *              ^
- *              |
- * 0x00100000   0xa0100000 upward       sash program text, data, and bss
- *
- *              ^
- *              |
- * 0x00020000   0xa0020000 upward       standalone program text, data, and bss
- *                                      (kernel is loaded here, also)
- *
- * 0x0001ffff   0xa001ffff downward     dbgmon stack
- *              |
- *              V
- *
- *              ^
- *              |
- * 0x00010000   0xa0010000 upward       dbgmon text, data, and bss
- *
- * 0x0000ffff   0xa000ffff downward     prom monitor stack
- *              |
- *              V
- *
- *              ^
- *              |
- * 0x00000500   0xa0000500 upward       prom monitor bss
- *
- * 0x000004ff   0xa00004ff
- * to                                   restart block
- * 0x00000400   0xa0000400
- *
- * 0x000003ff   0xa00003ff
- * to                                   general exception code
- * 0x00000080   0xa0000080              (note cpu addresses as 0x80000080!)
- *
- * 0x0000007f   0xa000007f
- * to                                   utlbmiss exception code
- * 0x00000000   0xa0000000              (note cpu addresses as 0x80000000!)
- */
-
-/* Uncomment this if you want srecords. 
-OUTPUT_FORMAT(srec)
- */
-ENTRY(start)
-STARTUP(crt0.o)
-INPUT(array.o)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- *
-PROVIDE (__stack = 1M - 8);
- */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0x80020000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rdata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-   _gp = ALIGN(16) + 0x8000;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-   end = .;
-   _end = .;
-}
diff --git a/libgloss/mips/cfe.c b/libgloss/mips/cfe.c
deleted file mode 100644
index c1d8af559..000000000
--- a/libgloss/mips/cfe.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/* cfe.c -- I/O code for the MIPS boards running CFE.  */
-
-/*
- * Copyright 2001, 2002, 2003
- * Broadcom Corporation. All rights reserved.
- * 
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- * 
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- * 
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- * 
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- */
-
-#include "cfe_api.h"
-
-void *__libcfe_init (long handle, long a1, long cfe_entrypoint, long a3);
-void __libcfe_exit (long status);
-
-char inbyte (void);
-int outbyte (char c);
-
-/* Echo input characters?  */
-int	__libcfe_echo_input = 0;
-
-/* CFE handle used to access console device.  */
-static int cfe_conshandle;
-
-
-/* Initialize firmware callbacks.  Called from crt0_cfe.  Returns desired
-   stack pointer.  */
-void *
-__libcfe_init (long handle, long a1, long entrypoint, long a3)
-{
-  cfe_init (handle, entrypoint);
-  cfe_conshandle = cfe_getstdhandle (CFE_STDHANDLE_CONSOLE);
-
-  __libcfe_meminit ();
-  return __libcfe_stack_top ();
-}
-
-/* Exit back to monitor, with the given status code.  */
-void
-__libcfe_exit (long status)
-{
-  outbyte ('\r');
-  outbyte ('\n');
-  cfe_exit (CFE_FLG_WARMSTART, status);
-}
-
-char
-inbyte (void)
-{
-  unsigned char c;
-  int rv;
-
-  while (cfe_read (cfe_conshandle, &c, 1) != 1)
-    ;
-  if (c == '\r')
-    c = '\n';
-  if (__libcfe_echo_input)
-    outbyte (c);
-  return c;
-}
-
-int
-outbyte (char c)
-{
-  int res;
-
-  do
-    {
-      res = cfe_write (cfe_conshandle, &c, 1);
-    }
-  while (res == 0);
-  if (c == '\n')
-    outbyte ('\r');
-  return 0;
-}
-
-/* This is the MIPS cache flush function call.  No defines are provided
-   by libgloss for 'cache', and CFE doesn't let you flush ranges, so
-   we just flush all I & D for every call.  */
-int
-_flush_cache (char *addr, int nbytes, int cache)
-{
-  cfe_flushcache (0);
-  return 0;
-}
diff --git a/libgloss/mips/cfe.ld b/libgloss/mips/cfe.ld
deleted file mode 100644
index 58e8014d7..000000000
--- a/libgloss/mips/cfe.ld
+++ /dev/null
@@ -1,173 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. */
-
-ENTRY(_start)
-STARTUP(crt0_cfe.o)
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lcfe -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0x80020000;
-  .text : {
-    _ftext = . ;
-    PROVIDE (eprol = .);
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-  }
-  .init : {
-    KEEP (*(.init))
-  }
-  .fini : {
-    KEEP (*(.fini))
-  }
-  .rel.sdata : {
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-  }
-  PROVIDE (etext = .);
-  _etext  =  .;
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   PROVIDE (edata  =  .);
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-  . = ALIGN(32);
-  PROVIDE (end = .);
-  _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/cfe_api.c b/libgloss/mips/cfe_api.c
deleted file mode 100644
index ab5ac9059..000000000
--- a/libgloss/mips/cfe_api.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/* From: CFE Id: cfe_api.c,v 1.16 2002/07/09 23:29:11 cgd Exp $ */
-
-/*
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- * 
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- * 
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- * 
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- * 
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*  *********************************************************************
-    *
-    *  Broadcom Common Firmware Environment (CFE)
-    *
-    *  Device Function stubs			File: cfe_api.c
-    *
-    *  This module contains device function stubs (small routines to
-    *  call the standard "iocb" interface entry point to CFE).
-    *  There should be one routine here per iocb function call.
-    *
-    *  Authors:  Mitch Lichtenberg, Chris Demetriou
-    *
-    ********************************************************************* */
-
-#include "cfe_api.h"
-#include "cfe_api_int.h"
-
-/* Cast from a native pointer to a cfe_xptr_t and back.  */
-#define XPTR_FROM_NATIVE(n)	((cfe_xptr_t) (intptr_t) (n))
-#define NATIVE_FROM_XPTR(x)	((void *) (intptr_t) (x))
-
-#ifdef CFE_API_IMPL_NAMESPACE
-#define cfe_iocb_dispatch(a)		__cfe_iocb_dispatch(a)
-#endif
-int cfe_iocb_dispatch(cfe_xiocb_t *xiocb);
-
-#if defined(CFE_API_common) || defined(CFE_API_ALL)
-/*
- * Declare the dispatch function with args of "intptr_t".
- * This makes sure whatever model we're compiling in
- * puts the pointers in a single register.  For example,
- * combining -mlong64 and -mips1 or -mips2 would lead to
- * trouble, since the handle and IOCB pointer will be
- * passed in two registers each, and CFE expects one.
- */
-
-static int (*cfe_dispfunc)(intptr_t handle, intptr_t xiocb) = 0;
-static cfe_xuint_t cfe_handle = 0;
-
-int
-cfe_init(cfe_xuint_t handle, cfe_xuint_t ept)
-{
-    cfe_dispfunc = NATIVE_FROM_XPTR(ept);
-    cfe_handle = handle;
-    return 0;
-}
-
-int
-cfe_iocb_dispatch(cfe_xiocb_t *xiocb)
-{
-    if (!cfe_dispfunc) return -1;
-    return (*cfe_dispfunc)((intptr_t)cfe_handle, (intptr_t)xiocb);
-}
-#endif /* CFE_API_common || CFE_API_ALL */
-
-#if defined(CFE_API_close) || defined(CFE_API_ALL)
-int
-cfe_close(int handle)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_CLOSE;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = handle;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = 0;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-
-}
-#endif /* CFE_API_close || CFE_API_ALL */
-
-#if defined(CFE_API_cpu_start) || defined(CFE_API_ALL)
-int
-cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_FW_CPUCTL;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags  = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_cpuctl_t);
-    xiocb.plist.xiocb_cpuctl.cpu_number = cpu;
-    xiocb.plist.xiocb_cpuctl.cpu_command = CFE_CPU_CMD_START;
-    xiocb.plist.xiocb_cpuctl.gp_val = gp;
-    xiocb.plist.xiocb_cpuctl.sp_val = sp;
-    xiocb.plist.xiocb_cpuctl.a1_val = a1;
-    xiocb.plist.xiocb_cpuctl.start_addr = (long)fn;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_cpu_start || CFE_API_ALL */
-
-#if defined(CFE_API_cpu_stop) || defined(CFE_API_ALL)
-int
-cfe_cpu_stop(int cpu)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_FW_CPUCTL;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags  = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_cpuctl_t);
-    xiocb.plist.xiocb_cpuctl.cpu_number = cpu;
-    xiocb.plist.xiocb_cpuctl.cpu_command = CFE_CPU_CMD_STOP;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_cpu_stop || CFE_API_ALL */
-
-#if defined(CFE_API_enumenv) || defined(CFE_API_ALL)
-int
-cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_ENV_SET;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_envbuf_t);
-    xiocb.plist.xiocb_envbuf.enum_idx = idx;
-    xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name);
-    xiocb.plist.xiocb_envbuf.name_length = namelen;
-    xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(val);
-    xiocb.plist.xiocb_envbuf.val_length = vallen;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_enumenv || CFE_API_ALL */
-
-#if defined(CFE_API_enummem) || defined(CFE_API_ALL)
-int
-cfe_enummem(int idx, int flags, cfe_xuint_t *start, cfe_xuint_t *length,
-	    cfe_xuint_t *type)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_FW_MEMENUM;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = flags;
-    xiocb.xiocb_psize = sizeof(xiocb_meminfo_t);
-    xiocb.plist.xiocb_meminfo.mi_idx = idx;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-
-    *start = xiocb.plist.xiocb_meminfo.mi_addr;
-    *length = xiocb.plist.xiocb_meminfo.mi_size;
-    *type = xiocb.plist.xiocb_meminfo.mi_type;
-
-    return 0;
-}
-#endif /* CFE_API_enummem || CFE_API_ALL */
-
-#if defined(CFE_API_exit) || defined(CFE_API_ALL)
-int
-cfe_exit(int warm, int status)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_FW_RESTART;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = warm ? CFE_FLG_WARMSTART : 0;
-    xiocb.xiocb_psize = sizeof(xiocb_exitstat_t);
-    xiocb.plist.xiocb_exitstat.status = status;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_exit || CFE_API_ALL */
-
-#if defined(CFE_API_flushcache) || defined(CFE_API_ALL)
-int
-cfe_flushcache(int flg)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_FW_FLUSHCACHE;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = flg;
-    xiocb.xiocb_psize = 0;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_flushcache || CFE_API_ALL */
-
-#if defined(CFE_API_getdevinfo) || defined(CFE_API_ALL)
-int
-cfe_getdevinfo(char *name)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_GETINFO;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
-    xiocb.plist.xiocb_buffer.buf_offset = 0;
-    xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(name);
-    xiocb.plist.xiocb_buffer.buf_length = cfe_strlen(name);
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-    return xiocb.plist.xiocb_buffer.buf_devflags;
-}
-#endif /* CFE_API_getdevinfo || CFE_API_ALL */
-
-#if defined(CFE_API_getenv) || defined(CFE_API_ALL)
-int
-cfe_getenv(char *name, char *dest, int destlen)
-{
-    cfe_xiocb_t xiocb;
-
-    *dest = 0;
-
-    xiocb.xiocb_fcode = CFE_CMD_ENV_GET;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_envbuf_t);
-    xiocb.plist.xiocb_envbuf.enum_idx = 0;
-    xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name);
-    xiocb.plist.xiocb_envbuf.name_length = cfe_strlen(name);
-    xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(dest);
-    xiocb.plist.xiocb_envbuf.val_length = destlen;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_getenv || CFE_API_ALL */
-
-#if defined(CFE_API_getfwinfo) || defined(CFE_API_ALL)
-int
-cfe_getfwinfo(cfe_fwinfo_t *info)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_FW_GETINFO;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_fwinfo_t);
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-
-    info->fwi_version = xiocb.plist.xiocb_fwinfo.fwi_version;
-    info->fwi_totalmem = xiocb.plist.xiocb_fwinfo.fwi_totalmem;
-    info->fwi_flags = xiocb.plist.xiocb_fwinfo.fwi_flags;
-    info->fwi_boardid = xiocb.plist.xiocb_fwinfo.fwi_boardid;
-    info->fwi_bootarea_va = xiocb.plist.xiocb_fwinfo.fwi_bootarea_va;
-    info->fwi_bootarea_pa = xiocb.plist.xiocb_fwinfo.fwi_bootarea_pa;
-    info->fwi_bootarea_size = xiocb.plist.xiocb_fwinfo.fwi_bootarea_size;
-#if 0
-    info->fwi_reserved1 = xiocb.plist.xiocb_fwinfo.fwi_reserved1;
-    info->fwi_reserved2 = xiocb.plist.xiocb_fwinfo.fwi_reserved2;
-    info->fwi_reserved3 = xiocb.plist.xiocb_fwinfo.fwi_reserved3;
-#endif
-
-    return 0;
-}
-#endif /* CFE_API_getfwinfo || CFE_API_ALL */
-
-#if defined(CFE_API_getstdhandle) || defined(CFE_API_ALL)
-int
-cfe_getstdhandle(int flg)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_GETHANDLE;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = flg;
-    xiocb.xiocb_psize = 0;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-    return xiocb.xiocb_handle;
-
-}
-#endif /* CFE_API_getstdhandle || CFE_API_ALL */
-
-#if defined(CFE_API_getticks) || defined(CFE_API_ALL)
-int64_t
-#ifdef CFE_API_IMPL_NAMESPACE
-__cfe_getticks(void)
-#else
-cfe_getticks(void)
-#endif
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_FW_GETTIME;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_time_t);
-    xiocb.plist.xiocb_time.ticks = 0;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.plist.xiocb_time.ticks;
-
-}
-#endif /* CFE_API_getticks || CFE_API_ALL */
-
-#if defined(CFE_API_inpstat) || defined(CFE_API_ALL)
-int
-cfe_inpstat(int handle)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_INPSTAT;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = handle;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_inpstat_t);
-    xiocb.plist.xiocb_inpstat.inp_status = 0;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-    return xiocb.plist.xiocb_inpstat.inp_status;
-
-}
-#endif /* CFE_API_inpstat || CFE_API_ALL */
-
-#if defined(CFE_API_ioctl) || defined(CFE_API_ALL)
-int
-cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, int length,
-	  int *retlen, cfe_xuint_t offset)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_IOCTL;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = handle;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
-    xiocb.plist.xiocb_buffer.buf_offset = offset;
-    xiocb.plist.xiocb_buffer.buf_ioctlcmd = ioctlnum;
-    xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer);
-    xiocb.plist.xiocb_buffer.buf_length = length;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (retlen)
-	*retlen = xiocb.plist.xiocb_buffer.buf_retlen;
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_ioctl || CFE_API_ALL */
-
-#if defined(CFE_API_open) || defined(CFE_API_ALL)
-int
-cfe_open(char *name)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_OPEN;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
-    xiocb.plist.xiocb_buffer.buf_offset = 0;
-    xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(name);
-    xiocb.plist.xiocb_buffer.buf_length = cfe_strlen(name);
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-    return xiocb.xiocb_handle;
-}
-#endif /* CFE_API_open || CFE_API_ALL */
-
-#if defined(CFE_API_read) || defined(CFE_API_ALL)
-int
-cfe_read(int handle, unsigned char *buffer, int length)
-{
-    return cfe_readblk(handle, 0, buffer, length);
-}
-#endif /* CFE_API_read || CFE_API_ALL */
-
-#if defined(CFE_API_readblk) || defined(CFE_API_ALL)
-int
-cfe_readblk(int handle, cfe_xint_t offset, unsigned char *buffer, int length)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_READ;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = handle;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
-    xiocb.plist.xiocb_buffer.buf_offset = offset;
-    xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer);
-    xiocb.plist.xiocb_buffer.buf_length = length;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-    return xiocb.plist.xiocb_buffer.buf_retlen;
-}
-#endif /* CFE_API_readblk || CFE_API_ALL */
-
-#if defined(CFE_API_setenv) || defined(CFE_API_ALL)
-int
-cfe_setenv(char *name, char *val)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_ENV_SET;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = 0;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_envbuf_t);
-    xiocb.plist.xiocb_envbuf.enum_idx = 0;
-    xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name);
-    xiocb.plist.xiocb_envbuf.name_length = cfe_strlen(name);
-    xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(val);
-    xiocb.plist.xiocb_envbuf.val_length = cfe_strlen(val);
-
-    cfe_iocb_dispatch(&xiocb);
-
-    return xiocb.xiocb_status;
-}
-#endif /* CFE_API_setenv || CFE_API_ALL */
-
-#if (defined(CFE_API_strlen) || defined(CFE_API_ALL)) \
-    && !defined(CFE_API_STRLEN_CUSTOM)
-int
-cfe_strlen(char *name)
-{
-    int count = 0;
-
-    while (*name++)
-	count++;
-
-    return count;
-}
-#endif /* CFE_API_strlen || CFE_API_ALL */
-
-#if defined(CFE_API_write) || defined(CFE_API_ALL)
-int
-cfe_write(int handle, unsigned char *buffer, int length)
-{
-    return cfe_writeblk(handle, 0, buffer, length);
-}
-#endif /* CFE_API_write || CFE_API_ALL */
-
-#if defined(CFE_API_writeblk) || defined(CFE_API_ALL)
-int
-cfe_writeblk(int handle, cfe_xint_t offset, unsigned char *buffer, int length)
-{
-    cfe_xiocb_t xiocb;
-
-    xiocb.xiocb_fcode = CFE_CMD_DEV_WRITE;
-    xiocb.xiocb_status = 0;
-    xiocb.xiocb_handle = handle;
-    xiocb.xiocb_flags = 0;
-    xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
-    xiocb.plist.xiocb_buffer.buf_offset = offset;
-    xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer);
-    xiocb.plist.xiocb_buffer.buf_length = length;
-
-    cfe_iocb_dispatch(&xiocb);
-
-    if (xiocb.xiocb_status < 0)
-	return xiocb.xiocb_status;
-    return xiocb.plist.xiocb_buffer.buf_retlen;
-}
-#endif /* CFE_API_writeblk || CFE_API_ALL */
diff --git a/libgloss/mips/cfe_api.h b/libgloss/mips/cfe_api.h
deleted file mode 100644
index afe46834e..000000000
--- a/libgloss/mips/cfe_api.h
+++ /dev/null
@@ -1,237 +0,0 @@
-/* From: CFE Id: cfe_api.h,v 1.29 2002/07/09 23:29:11 cgd Exp $ */
-
-/*
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- * 
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- * 
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- * 
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- * 
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*  *********************************************************************
-    *
-    *  Broadcom Common Firmware Environment (CFE)
-    *
-    *  Device function prototypes		File: cfe_api.h
-    *
-    *  This file contains declarations for doing callbacks to
-    *  cfe from an application.  It should be the only header
-    *  needed by the application to use this library
-    *
-    *  Authors:  Mitch Lichtenberg, Chris Demetriou
-    *
-    ********************************************************************* */
-
-#ifndef CFE_API_H
-#define CFE_API_H
-
-/*
- * Apply customizations here for different OSes.  These need to:
- *	* typedef uint64_t, int64_t, intptr_t, uintptr_t.
- *	* define cfe_strlen() if use of an existing function is desired.
- *	* define CFE_API_IMPL_NAMESPACE if API functions are to use
- *	  names in the implementation namespace.
- * Also, optionally, if the build environment does not do so automatically,
- * CFE_API_* can be defined here as desired.
- */
-/* Begin customization. */
-#include <sys/types.h>		/* for __uint64_t and __int64_t. */
-#define int64_t __int64_t
-#define uint64_t __int64_t
-#include <_ansi.h>		/* for _POINTER_INT. */
-typedef _POINTER_INT intptr_t;
-typedef unsigned _POINTER_INT uintptr_t;
-
-#include <string.h>
-#define cfe_strlen(s)	strlen(s)
-
-#define CFE_API_ALL
-#define CFE_API_IMPL_NAMESPACE
-
-/* Return the stack size to be used for the program.  Normally 32KB.  The
-   normal memory allocator uses the bottom of the stack as its heap limit,
-   so if your application uses a lot of stack space define this function
-   appropriately to keep the heap from growing into the stack.  */
-unsigned long __libcfe_stack_size(void) __attribute__((__weak__));
-
-/* Return the (max address + 1) to be used by this program.  (This address
-   minus '_end' is used as the heap size, so the address should be in the
-   same address space segments as _end.  The normal memory allocator
-   queries CFE to determine the available memory.  */
-void *__libcfe_mem_limit(void) __attribute__((__weak__));
-
-/* If the configuration ability provided by __libcfe_mem_limit() and
-   __libcfe_stack_size() do not provide enough flexibility for your
-   application's memory allocation needs, you can replace the normal
-   low-level allocator by providing the functions listed below and
-   also the function:
-
-	void *sbrk(ptrdiff_t incr);
-
-   If you provide any of these functions, you should provide all three,
-   and be sure to link them into your application as a .o file (rather
-   than a .a).
-
-   __libcfe_meminit() is responsible for initializing the low-level
-   memory allocator.
-
-   __libcfe_stack_top() returns a pointer to the top (highest address;
-   the stack grows down from that address) of the stack to be used by
-   the program.  */
-void __libcfe_meminit (void);
-void *__libcfe_stack_top (void);
-
-/* End customization. */
-
-
-/*  *********************************************************************
-    *  Constants
-    ********************************************************************* */
-
-/* Seal indicating CFE's presence, passed to user program. */
-#define CFE_EPTSEAL 0x43464531
-
-#define CFE_MI_RESERVED	0		/* memory is reserved, do not use */
-#define CFE_MI_AVAILABLE 1		/* memory is available */
-
-#define CFE_FLG_WARMSTART     0x00000001
-#define CFE_FLG_FULL_ARENA    0x00000001
-#define CFE_FLG_ENV_PERMANENT 0x00000001
-
-#define CFE_CPU_CMD_START 1
-#define CFE_CPU_CMD_STOP 0
-
-#define CFE_STDHANDLE_CONSOLE	0
-
-#define CFE_DEV_NETWORK 	1
-#define CFE_DEV_DISK		2
-#define CFE_DEV_FLASH		3
-#define CFE_DEV_SERIAL		4
-#define CFE_DEV_CPU		5
-#define CFE_DEV_NVRAM		6
-#define CFE_DEV_CLOCK           7
-#define CFE_DEV_OTHER		8
-#define CFE_DEV_MASK		0x0F
-
-#define CFE_CACHE_FLUSH_D	1
-#define CFE_CACHE_INVAL_I	2
-#define CFE_CACHE_INVAL_D	4
-#define CFE_CACHE_INVAL_L2	8
-
-#define CFE_FWI_64BIT		0x00000001
-#define CFE_FWI_32BIT		0x00000002
-#define CFE_FWI_RELOC		0x00000004
-#define CFE_FWI_UNCACHED	0x00000008
-#define CFE_FWI_MULTICPU	0x00000010
-#define CFE_FWI_FUNCSIM		0x00000020
-#define CFE_FWI_RTLSIM		0x00000040
-
-typedef struct {
-    int64_t fwi_version;		/* major, minor, eco version */
-    int64_t fwi_totalmem;		/* total installed mem */
-    int64_t fwi_flags;		        /* various flags */
-    int64_t fwi_boardid;		/* board ID */
-    int64_t fwi_bootarea_va;		/* VA of boot area */
-    int64_t fwi_bootarea_pa;		/* PA of boot area */
-    int64_t fwi_bootarea_size;	        /* size of boot area */
-} cfe_fwinfo_t;
-
-
-/*
- * cfe_strlen is handled specially: If already defined, it has been
- * overridden in this environment with a standard strlen-like function.
- */
-#ifdef cfe_strlen
-# define CFE_API_STRLEN_CUSTOM
-#else
-# ifdef CFE_API_IMPL_NAMESPACE
-#  define cfe_strlen(a)			__cfe_strlen(a)
-# endif
-int cfe_strlen(char *name);
-#endif
-
-/*
- * Defines and prototypes for functions which take no arguments.
- */
-#ifdef CFE_API_IMPL_NAMESPACE
-int64_t __cfe_getticks(void);
-#define cfe_getticks()			__cfe_getticks()
-#else
-int64_t cfe_getticks(void);
-#endif
-
-/*
- * Defines and prototypes for the rest of the functions.
- */
-#ifdef CFE_API_IMPL_NAMESPACE
-#define cfe_close(a)			__cfe_close(a)
-#define cfe_cpu_start(a,b,c,d,e)	__cfe_cpu_start(a,b,c,d,e)
-#define cfe_cpu_stop(a)			__cfe_cpu_stop(a)
-#define cfe_enumenv(a,b,d,e,f)		__cfe_enumenv(a,b,d,e,f)
-#define cfe_enummem(a,b,c,d,e)		__cfe_enummem(a,b,c,d,e)
-#define cfe_exit(a,b)			__cfe_exit(a,b)
-#define cfe_flushcache(a)		__cfe_cacheflush(a)
-#define cfe_getdevinfo(a)		__cfe_getdevinfo(a)
-#define cfe_getenv(a,b,c)		__cfe_getenv(a,b,c)
-#define cfe_getfwinfo(a)		__cfe_getfwinfo(a)
-#define cfe_getstdhandle(a)		__cfe_getstdhandle(a)
-#define cfe_init(a,b)			__cfe_init(a,b)
-#define cfe_inpstat(a)			__cfe_inpstat(a)
-#define cfe_ioctl(a,b,c,d,e,f)		__cfe_ioctl(a,b,c,d,e,f)
-#define cfe_open(a)			__cfe_open(a)
-#define cfe_read(a,b,c)			__cfe_read(a,b,c)
-#define cfe_readblk(a,b,c,d)		__cfe_readblk(a,b,c,d)
-#define cfe_setenv(a,b)			__cfe_setenv(a,b)
-#define cfe_write(a,b,c)		__cfe_write(a,b,c)
-#define cfe_writeblk(a,b,c,d)		__cfe_writeblk(a,b,c,d)
-#endif /* CFE_API_IMPL_NAMESPACE */
-
-int cfe_close(int handle);
-int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1);
-int cfe_cpu_stop(int cpu);
-int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
-int cfe_enummem(int idx, int flags, uint64_t *start, uint64_t *length,
-		uint64_t *type);
-int cfe_exit(int warm,int status);
-int cfe_flushcache(int flg);
-int cfe_getdevinfo(char *name);
-int cfe_getenv(char *name, char *dest, int destlen);
-int cfe_getfwinfo(cfe_fwinfo_t *info);
-int cfe_getstdhandle(int flg);
-int cfe_init(uint64_t handle,uint64_t ept);
-int cfe_inpstat(int handle);
-int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
-	      int length, int *retlen, uint64_t offset);
-int cfe_open(char *name);
-int cfe_read(int handle, unsigned char *buffer, int length);
-int cfe_readblk(int handle, int64_t offset, unsigned char *buffer, int length);
-int cfe_setenv(char *name, char *val);
-int cfe_write(int handle, unsigned char *buffer, int length);
-int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer,
-		 int length);
-
-#endif /* CFE_API_H */
diff --git a/libgloss/mips/cfe_api_int.h b/libgloss/mips/cfe_api_int.h
deleted file mode 100644
index 618211a13..000000000
--- a/libgloss/mips/cfe_api_int.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/* From: CFE Id: cfe_api_int.h,v 1.21 2002/07/09 23:29:11 cgd Exp $ */
-
-/*
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- * 
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- * 
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- * 
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- * 
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*  *********************************************************************
-    *
-    *  Broadcom Common Firmware Environment (CFE)
-    *
-    *  Device function prototypes		File: cfe_api_int.h
-    *
-    *  This header defines all internal types and macros for the
-    *  library.  This is stuff that's not exported to an app
-    *  using the library.
-    *
-    *  Authors:  Mitch Lichtenberg, Chris Demetriou
-    *
-    ********************************************************************* */
-
-#ifndef CFE_API_INT_H
-#define CFE_API_INT_H
-
-/*  *********************************************************************
-    *  Constants
-    ********************************************************************* */
-
-#define CFE_CMD_FW_GETINFO	0
-#define CFE_CMD_FW_RESTART	1
-#define CFE_CMD_FW_BOOT		2
-#define CFE_CMD_FW_CPUCTL	3
-#define CFE_CMD_FW_GETTIME      4
-#define CFE_CMD_FW_MEMENUM	5
-#define CFE_CMD_FW_FLUSHCACHE	6
-
-#define CFE_CMD_DEV_GETHANDLE	9
-#define CFE_CMD_DEV_ENUM	10
-#define CFE_CMD_DEV_OPEN	11
-#define CFE_CMD_DEV_INPSTAT	12
-#define CFE_CMD_DEV_READ	13
-#define CFE_CMD_DEV_WRITE	14
-#define CFE_CMD_DEV_IOCTL	15
-#define CFE_CMD_DEV_CLOSE	16
-#define CFE_CMD_DEV_GETINFO	17
-
-#define CFE_CMD_ENV_ENUM	20
-#define CFE_CMD_ENV_GET		22
-#define CFE_CMD_ENV_SET		23
-#define CFE_CMD_ENV_DEL		24
-
-#define CFE_CMD_MAX		32
-
-#define CFE_CMD_VENDOR_USE	0x8000	/* codes above this are for customer use */
-
-/*  *********************************************************************
-    *  Structures
-    ********************************************************************* */
-
-typedef uint64_t cfe_xuint_t;
-typedef int64_t cfe_xint_t;
-typedef int64_t cfe_xptr_t;
-
-typedef struct xiocb_buffer_s {
-    cfe_xuint_t   buf_offset;		/* offset on device (bytes) */
-    cfe_xptr_t 	  buf_ptr;		/* pointer to a buffer */
-    cfe_xuint_t   buf_length;		/* length of this buffer */
-    cfe_xuint_t   buf_retlen;		/* returned length (for read ops) */
-    cfe_xuint_t   buf_ioctlcmd;		/* IOCTL command (used only for IOCTLs) */
-} xiocb_buffer_t;
-
-#define buf_devflags buf_ioctlcmd	/* returned device info flags */
-
-typedef struct xiocb_inpstat_s {
-    cfe_xuint_t inp_status;		/* 1 means input available */
-} xiocb_inpstat_t;
-
-typedef struct xiocb_envbuf_s {
-    cfe_xint_t enum_idx;		/* 0-based enumeration index */
-    cfe_xptr_t name_ptr;		/* name string buffer */
-    cfe_xint_t name_length;		/* size of name buffer */
-    cfe_xptr_t val_ptr;			/* value string buffer */
-    cfe_xint_t val_length;		/* size of value string buffer */
-} xiocb_envbuf_t;
-
-typedef struct xiocb_cpuctl_s {
-    cfe_xuint_t  cpu_number;		/* cpu number to control */
-    cfe_xuint_t  cpu_command;		/* command to issue to CPU */
-    cfe_xuint_t  start_addr;		/* CPU start address */
-    cfe_xuint_t  gp_val;		/* starting GP value */
-    cfe_xuint_t  sp_val;		/* starting SP value */
-    cfe_xuint_t  a1_val;		/* starting A1 value */
-} xiocb_cpuctl_t;
-
-typedef struct xiocb_time_s {
-    cfe_xint_t ticks;			/* current time in ticks */
-} xiocb_time_t;
-
-typedef struct xiocb_exitstat_s {
-    cfe_xint_t status;
-} xiocb_exitstat_t;
-
-typedef struct xiocb_meminfo_s {
-    cfe_xint_t  mi_idx;			/* 0-based enumeration index */
-    cfe_xint_t  mi_type;		/* type of memory block */
-    cfe_xuint_t mi_addr;		/* physical start address */
-    cfe_xuint_t mi_size;		/* block size */
-} xiocb_meminfo_t;
-
-typedef struct xiocb_fwinfo_s {
-    cfe_xint_t fwi_version;		/* major, minor, eco version */
-    cfe_xint_t fwi_totalmem;		/* total installed mem */
-    cfe_xint_t fwi_flags;		/* various flags */
-    cfe_xint_t fwi_boardid;		/* board ID */
-    cfe_xint_t fwi_bootarea_va;		/* VA of boot area */
-    cfe_xint_t fwi_bootarea_pa;		/* PA of boot area */
-    cfe_xint_t fwi_bootarea_size;	/* size of boot area */
-    cfe_xint_t fwi_reserved1;
-    cfe_xint_t fwi_reserved2;
-    cfe_xint_t fwi_reserved3;
-} xiocb_fwinfo_t;
-
-typedef struct cfe_xiocb_s {
-    cfe_xuint_t xiocb_fcode;		/* IOCB function code */
-    cfe_xint_t  xiocb_status;		/* return status */
-    cfe_xint_t  xiocb_handle;		/* file/device handle */
-    cfe_xuint_t xiocb_flags;		/* flags for this IOCB */
-    cfe_xuint_t xiocb_psize;		/* size of parameter list */
-    union {
-	xiocb_buffer_t  xiocb_buffer;	/* buffer parameters */
-	xiocb_inpstat_t xiocb_inpstat;	/* input status parameters */
-	xiocb_envbuf_t  xiocb_envbuf;	/* environment function parameters */
-	xiocb_cpuctl_t  xiocb_cpuctl;	/* CPU control parameters */
-	xiocb_time_t    xiocb_time;	/* timer parameters */
-	xiocb_meminfo_t xiocb_meminfo;	/* memory arena info parameters */
-	xiocb_fwinfo_t  xiocb_fwinfo;	/* firmware information */
-	xiocb_exitstat_t xiocb_exitstat; /* Exit Status */
-    } plist;
-} cfe_xiocb_t;
-
-#endif /* CFE_API_INT_H */
diff --git a/libgloss/mips/cfe_error.h b/libgloss/mips/cfe_error.h
deleted file mode 100644
index a12af4b03..000000000
--- a/libgloss/mips/cfe_error.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* From: CFE Id: cfe_error.h,v 1.2 2002/07/09 19:37:52 cgd Exp $ */
-
-/*
- * Copyright 2000, 2001, 2002
- * Broadcom Corporation. All rights reserved.
- * 
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- * 
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- * 
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- * 
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*  *********************************************************************
-    *  
-    *  Broadcom Common Firmware Environment (CFE)
-    *  
-    *  Error codes				File: cfe_error.h
-    *  
-    *  CFE's global error code list is here.
-    *  
-    *  Author:  Mitch Lichtenberg
-    *  
-    ********************************************************************* */
-
-
-#define CFE_OK			 0
-#define CFE_ERR                 -1	/* generic error */
-#define CFE_ERR_INV_COMMAND	-2
-#define CFE_ERR_EOF		-3
-#define CFE_ERR_IOERR		-4
-#define CFE_ERR_NOMEM		-5
-#define CFE_ERR_DEVNOTFOUND	-6
-#define CFE_ERR_DEVOPEN		-7
-#define CFE_ERR_INV_PARAM	-8
-#define CFE_ERR_ENVNOTFOUND	-9
-#define CFE_ERR_ENVREADONLY	-10
-
-#define CFE_ERR_NOTELF		-11
-#define CFE_ERR_NOT32BIT 	-12
-#define CFE_ERR_WRONGENDIAN 	-13
-#define CFE_ERR_BADELFVERS 	-14
-#define CFE_ERR_NOTMIPS 	-15
-#define CFE_ERR_BADELFFMT 	-16
-#define CFE_ERR_BADADDR 	-17
-
-#define CFE_ERR_FILENOTFOUND	-18
-#define CFE_ERR_UNSUPPORTED	-19
-
-#define CFE_ERR_HOSTUNKNOWN	-20
-
-#define CFE_ERR_TIMEOUT		-21
-
-#define CFE_ERR_PROTOCOLERR	-22
-
-#define CFE_ERR_NETDOWN		-23
-#define CFE_ERR_NONAMESERVER	-24
-
-#define CFE_ERR_NOHANDLES	-25
-#define CFE_ERR_ALREADYBOUND	-26
-
-#define CFE_ERR_CANNOTSET	-27
-#define CFE_ERR_NOMORE		-28
-#define CFE_ERR_BADFILESYS	-29
-#define CFE_ERR_FSNOTAVAIL	-30
-
-#define CFE_ERR_INVBOOTBLOCK	-31
-#define CFE_ERR_WRONGDEVTYPE	-32
-#define CFE_ERR_BBCHECKSUM	-33
-#define CFE_ERR_BOOTPROGCHKSUM	-34
-
-#define CFE_ERR_LDRNOTAVAIL	-35
-
-#define CFE_ERR_NOTREADY	-36
-
-#define CFE_ERR_GETMEM          -37
-#define CFE_ERR_SETMEM          -38
-
-#define CFE_ERR_NOTCONN		-39
-#define CFE_ERR_ADDRINUSE	-40
diff --git a/libgloss/mips/cfe_mem.c b/libgloss/mips/cfe_mem.c
deleted file mode 100644
index 87caabf8c..000000000
--- a/libgloss/mips/cfe_mem.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* cfe_mem.c -- Replaceable memory management hooks for MIPS boards
-   running CFE.  */
-
-/*
- * Copyright 2003
- * Broadcom Corporation. All rights reserved.
- * 
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- * 
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- * 
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- * 
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- */
-
-#include "cfe_api.h"
-
-/* Structure filled in by get_mem_info.  Only the size field is
-   actually used (by sbrk), so the others aren't even filled in.
-   Note that 'size' is the __size__ of the heap starting at _end!  */
-struct s_mem {
-  unsigned int size;
-  unsigned int icsize;
-  unsigned int dcsize;
-};
-
-void *get_mem_info (struct s_mem *);
-
-extern char _end[];
-
-/* Address immediately after available memory.  */
-static unsigned long memtop;
-
-/* Program stack size.  */
-static unsigned long stack_size;
-
-void
-__libcfe_meminit (void)
-{
-  /* If the user has provided a memory-limit function, use it to
-     determine the end of usable memory.  */
-  if (&__libcfe_mem_limit != NULL)
-    memtop = __libcfe_mem_limit ();
-  else
-    {
-      uint64_t start, length, type;
-      int i, rv;
-      long end_segbits, end_pa;
-
-      /* Note that this only works if _end and the program live in kseg0
-         or kseg1.  Not a problem with the default linker script, but
-         if you're writing your own, keep it in mind.  For more complex
-         memory allocation needs, you're encouraged to copy this file
-         and syscalls.c (for sbrk()), and reimplement as appropriate.  */
-      end_segbits = (long)_end & ~ 0x1fffffffL;
-      end_pa = (long)_end & 0x1fffffffL;
-
-      for (i = 0; ; i++)
-        {
-          rv = cfe_enummem(i, 0, &start, &length, &type);
-          if (rv < 0)
-            {
-              /* Did not find an available entry containing _end.
-                 Assume a minimal amount of memory (1MB).  */
-              memtop = _end + (1 * 1024 * 1024);
-              break;
-            }
-
-          /* If not available, try the next.  */
-          if (type != CFE_MI_AVAILABLE)
-            continue;
-
-          /* If end_pa is between start and (start + length) then we have
-	     a winner.  */
-          if (end_pa >= start && end_pa < (start + length))
-            {
-              memtop = (start + length) | end_segbits;
-              break;
-            }
-        }
-    }
-
-  /* If the user has provided a memory-limit function, use it to
-     determine the end of usable memory.  */
-  if (&__libcfe_stack_size != NULL)
-    stack_size = __libcfe_stack_size ();
-  else
-    stack_size = (32 * 1024);		/* Default = 32KB.  */
-
-  /* Chop the top of memory to a 32-byte aligned location, and
-     round the stack size up to a 32-byte multiple.  */
-  memtop = memtop & ~(unsigned long)31;
-  stack_size = (stack_size + 31) & ~(unsigned long)31;
-}
-
-void *
-__libcfe_stack_top (void)
-{
-  /* Grow down from the top of available memory.  Obviously, if
-     code writes above this limit, problems could result!  */
-  return (void *) memtop;
-}
-
-/* For compatibility, get_mem_info returns the top of memory
-   (i.e., the stack address).  Nothing actually uses that,
-   though.  */
-void *
-get_mem_info (struct s_mem *meminfo)
-{
-  meminfo->size = (char *)(memtop - stack_size) - _end;
-  return (void *) memtop;
-}
diff --git a/libgloss/mips/cma101.c b/libgloss/mips/cma101.c
deleted file mode 100644
index e8f381864..000000000
--- a/libgloss/mips/cma101.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * cma101.c -- lo-level support for Cogent CMA101 development board.
- *
- * Copyright (c) 1996, 2001, 2002 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#ifdef __mips16
-/* The assembler portions of this file need to be re-written to
-   support mips16, if and when that seems useful.
-*/
-#error cma101.c can not be compiled -mips16
-#endif
-
-
-#include <time.h>       /* standard ANSI time routines */
-
-/* Normally these would appear in a header file for external
-   use. However, we are only building a simple example world at the
-   moment: */
-
-#include "regs.S"
-
-#if defined(MIPSEB)
-#define BYTEREG(b,o)    ((volatile unsigned char *)(PHYS_TO_K1((b) + (o) + 7)))
-#endif /* MIPSEB */
-#if defined(MIPSEL)
-#define BYTEREG(b,o)    ((volatile unsigned char *)(PHYS_TO_K1((b) + (o))))
-#endif /* MIPSEL */
-
-/* I/O addresses: */
-#define RTCLOCK_BASE (0x0E800000) /* Mk48T02 NVRAM/RTC */
-#define UART_BASE    (0x0E900000) /* NS16C552 DUART */
-#define LCD_BASE     (0x0EB00000) /* Alphanumeric display */
-
-/* LCD panel manifests: */
-#define LCD_DATA     BYTEREG(LCD_BASE,0)
-#define LCD_CMD      BYTEREG(LCD_BASE,8)
-
-#define LCD_STAT_BUSY   (0x80)
-#define LCD_SET_DDADDR  (0x80)
-
-/* RTC manifests */
-/* The lo-offsets are the NVRAM locations (0x7F8 bytes) */
-#define RTC_CONTROL     BYTEREG(RTCLOCK_BASE,0x3FC0)
-#define RTC_SECS        BYTEREG(RTCLOCK_BASE,0x3FC8)
-#define RTC_MINS        BYTEREG(RTCLOCK_BASE,0x3FD0)
-#define RTC_HOURS       BYTEREG(RTCLOCK_BASE,0x3FD8)
-#define RTC_DAY         BYTEREG(RTCLOCK_BASE,0x3FE0)
-#define RTC_DATE        BYTEREG(RTCLOCK_BASE,0x3FE8)
-#define RTC_MONTH       BYTEREG(RTCLOCK_BASE,0x3FF0)
-#define RTC_YEAR        BYTEREG(RTCLOCK_BASE,0x3FF8)
-
-#define RTC_CTL_LOCK_READ       (0x40) /* lock RTC whilst reading */
-#define RTC_CTL_LOCK_WRITE      (0x80) /* lock RTC whilst writing */
-
-/* Macro to force out-standing memory transfers to complete before
-   next sequence. For the moment we assume that the processor in the
-   CMA101 board supports at least ISA II.  */
-#define DOSYNC() asm(" .set mips2 ; sync ; .set mips0")
-
-/* We disable interrupts by writing zero to all of the masks, and the
-   global interrupt enable bit: */
-#define INTDISABLE(sr,tmp) asm("\
- .set mips2 ; \
- mfc0 %0,$12 ; \
- lui %1,0xffff ; \
- ori %1,%1,0xfffe ; \
- and %1, %0, %1 ; \
- mtc0 %1,$12 ; \
- .set mips0" : "=d" (sr), "=d" (tmp))
-#define INTRESTORE(sr) asm("\
- .set mips2 ; \
- mtc0 %0,$12 ; \
- .set mips0" : : "d" (sr))
-
-/* TODO:FIXME: The CPU card support should be in separate source file
-   from the standard CMA101 support provided in this file. */
-
-/* The CMA101 board being used contains a CMA257 Vr4300 CPU:
-   MasterClock is at 33MHz. PClock is derived from MasterClock by
-   multiplying by the ratio defined by the DivMode pins:
-   	DivMode(1:0)    MasterClock     PClock  Ratio
-        00              100MHz          100MHz  1:1
-        01              100MHz          150MHz  1.5:1
-        10              100MHz          200MHz  2:1
-        11              100Mhz          300MHz  3:1
-
-   Are these pins reflected in the EC bits in the CONFIG register? or
-   is that talking about a different clock multiplier?
-   	110 = 1
-        111 = 1.5
-        000 = 2
-        001 = 3
-        (all other values are undefined)
-*/
-
-#define MASTERCLOCK (33) /* ticks per uS */
-unsigned int pclock; /* number of PClock ticks per uS */
-void
-set_pclock (void)
-{
-  unsigned int config;
-  asm volatile ("mfc0 %0,$16 ; nop ; nop" : "=r" (config)); /* nasty CP0 register constant */
-  switch ((config >> 28) & 0x7) {
-    case 0x7 : /* 1.5:1 */
-     pclock = (MASTERCLOCK + (MASTERCLOCK / 2));
-     break;
-
-    case 0x0 : /* 2:1 */
-     pclock = (2 * MASTERCLOCK);
-     break;
-
-    case 0x1 : /* 3:1 */
-     pclock = (3 * MASTERCLOCK);
-     break;
-
-    case 0x6 : /* 1:1 */
-    default : /* invalid configuration, so assume the lowest */
-     pclock = MASTERCLOCK;
-     break;
-  }
-
-  return;
-}
-
-#define PCLOCK_WAIT(x)  __cpu_timer_poll((x) * pclock)
-
-/* NOTE: On the Cogent CMA101 board the LCD controller will sometimes
-   return not-busy, even though it is. The work-around is to perform a
-   ~50uS delay before checking the busy signal. */
-
-static int
-lcd_busy (void)
-{
-  PCLOCK_WAIT(50); /* 50uS delay */
-  return(*LCD_CMD & LCD_STAT_BUSY);
-}
-
-/* Note: This code *ASSUMES* that the LCD has already been initialised
-   by the monitor. It only provides code to write to the LCD, and is
-   not a complete device driver. */
-
-void
-lcd_display (int line, const char *msg)
-{
-  int n;
-
-  if (lcd_busy ())
-   return;
-
-  *LCD_CMD = (LCD_SET_DDADDR | (line == 1 ? 0x40 : 0x00));
-
-  for (n = 0; n < 16; n++) {
-    if (lcd_busy ())
-     return;
-    if (*msg)
-     *LCD_DATA = *msg++;
-    else
-     *LCD_DATA = ' ';
-  }
-
-  return;
-}
-
-#define SM_PATTERN (0x55AA55AA)
-#define SM_INCR ((256 << 10) / sizeof(unsigned int)) /* 64K words */
-
-extern unsigned int __buserr_count(void);
-extern void __default_buserr_handler(void);
-extern void __restore_buserr_handler(void);
-
-/* Allow the user to provide his/her own defaults.  */
-unsigned int __sizemem_default;
-
-unsigned int
-__sizemem ()
-{
-  volatile unsigned int *base;
-  volatile unsigned int *probe;
-  unsigned int baseorig;
-  unsigned int sr;
-  extern char end[];
-  char *endptr = (char *)&end;
-  int extra;
-
-  /* If the linker script provided a value for the memory size (or the user
-     overrode it in a debugger), use that.  */
-  if (__sizemem_default)
-    return __sizemem_default;
-
-  /* If we are running in kernel segment 0 (possibly cached), try sizing memory
-     in kernel segment 1 (uncached) to avoid some problems with monitors.  */
-  if (endptr >= K0BASE_ADDR && endptr < K1BASE_ADDR)
-    endptr = (endptr - K0BASE_ADDR) + K1BASE_ADDR;
-
-  INTDISABLE(sr,baseorig); /* disable all interrupt masks */
-
-  __default_buserr_handler();
-  __cpu_flush();
-
-  DOSYNC();
-
-  /* _end is the end of the user program.  _end may not be properly aligned
-     for an int pointer, so we adjust the address to make sure it is safe.
-     We use void * arithmetic to avoid accidentally truncating the pointer.  */
-
-  extra = ((int) endptr & (sizeof (int) - 1));
-  base = ((void *) endptr + sizeof (int) - extra);
-  baseorig = *base;
-
-  *base = SM_PATTERN;
-  /* This assumes that the instructions fetched between the store, and
-     the following read will have changed the data bus contents: */
-  if (*base == SM_PATTERN) {
-    probe = base;
-    for (;;) {
-      unsigned int probeorig;
-      probe += SM_INCR;
-      probeorig = *probe;
-      /* Check if a bus error occurred: */
-      if (!__buserr_count()) {
-        *probe = SM_PATTERN;
-        DOSYNC();
-        if (*probe == SM_PATTERN) {
-          *probe = ~SM_PATTERN;
-          DOSYNC();
-          if (*probe == ~SM_PATTERN) {
-            if (*base == SM_PATTERN) {
-              *probe = probeorig;
-              continue;
-            }
-          }
-        }
-        *probe = probeorig;
-      }
-      break;
-    }
-  }
-
-  *base = baseorig;
-  __restore_buserr_handler();
-  __cpu_flush();
-
-  DOSYNC();
-
-  INTRESTORE(sr); /* restore interrupt mask to entry state */
-
-  return((probe - base) * sizeof(unsigned int));
-}
-
-/* Provided as a function, so as to avoid reading the I/O location
-   multiple times: */
-static int
-convertbcd(byte)
-     unsigned char byte;
-{
-  return ((((byte >> 4) & 0xF) * 10) + (byte & 0xF));
-}
-
-time_t
-time (_timer)
-     time_t *_timer;
-{
-  time_t result = 0;
-  struct tm tm;
-  *RTC_CONTROL |= RTC_CTL_LOCK_READ;
-  DOSYNC();
-
-  tm.tm_sec = convertbcd(*RTC_SECS);
-  tm.tm_min = convertbcd(*RTC_MINS);
-  tm.tm_hour = convertbcd(*RTC_HOURS);
-  tm.tm_mday = convertbcd(*RTC_DATE);
-  tm.tm_mon = convertbcd(*RTC_MONTH);
-  tm.tm_year = convertbcd(*RTC_YEAR);
-
-  DOSYNC();
-  *RTC_CONTROL &= ~(RTC_CTL_LOCK_READ | RTC_CTL_LOCK_WRITE);
-
-  tm.tm_isdst = 0;
-
-  /* Check for invalid time information */
-  if ((tm.tm_sec < 60) && (tm.tm_min < 60) && (tm.tm_hour < 24)
-      && (tm.tm_mday < 32) && (tm.tm_mon < 13)) {
-
-    /* Get the correct year number, but keep it in YEAR-1900 form: */
-    if (tm.tm_year < 70)
-      tm.tm_year += 100;
-
-#if 0 /* NOTE: mon_printf() can only accept 4 arguments (format string + 3 fields) */
-    mon_printf("[DBG: s=%d m=%d h=%d]", tm.tm_sec, tm.tm_min, tm.tm_hour);
-    mon_printf("[DBG: d=%d m=%d y=%d]", tm.tm_mday, tm.tm_mon, tm.tm_year);
-#endif
-
-    /* Convert the time-structure into a second count */
-    result = mktime (&tm);
-  }
-
-  if (_timer != NULL)
-    *_timer = result;
-
-  return (result);
-}
-
-/*> EOF cma101.c <*/
diff --git a/libgloss/mips/configure b/libgloss/mips/configure
deleted file mode 100755
index 1d875b855..000000000
--- a/libgloss/mips/configure
+++ /dev/null
@@ -1,3806 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-if test "x$CONFIG_SHELL" = x; then
-  if (eval ":") 2>/dev/null; then
-  as_have_required=yes
-else
-  as_have_required=no
-fi
-
-  if test $as_have_required = yes && 	 (eval ":
-(as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=\$LINENO
-  as_lineno_2=\$LINENO
-  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
-  :
-else
-  as_candidate_shells=
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  case $as_dir in
-	 /*)
-	   for as_base in sh bash ksh sh5; do
-	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
-	   done;;
-       esac
-done
-IFS=$as_save_IFS
-
-
-      for as_shell in $as_candidate_shells $SHELL; do
-	 # Try only shells that exist, to save several forks.
-	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
-  CONFIG_SHELL=$as_shell
-	       as_have_required=yes
-	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
-  (exit $1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
-  break
-fi
-
-fi
-
-      done
-
-      if test "x$CONFIG_SHELL" != x; then
-  for as_var in BASH_ENV ENV
-        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-        done
-        export CONFIG_SHELL
-        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
-
-    if test $as_have_required = no; then
-  echo This script requires a shell more modern than all the
-      echo shells that I found on your system.  Please install a
-      echo modern shell, or manually run the script under such a
-      echo shell if you do have one.
-      { (exit 1); exit 1; }
-fi
-
-
-fi
-
-fi
-
-
-
-(eval "as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test \$exitcode = 0") || {
-  echo No shell found that supports shell functions.
-  echo Please tell autoconf@gnu.org about your system,
-  echo including any error possibly output before this
-  echo message
-}
-
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-    as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-        test -d "$1/.";
-      else
-	case $1 in
-        -*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-
-exec 7<&0 </dev/null 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="crt0.S"
-ac_subst_vars='SHELL
-PATH_SEPARATOR
-PACKAGE_NAME
-PACKAGE_TARNAME
-PACKAGE_VERSION
-PACKAGE_STRING
-PACKAGE_BUGREPORT
-exec_prefix
-prefix
-program_transform_name
-bindir
-sbindir
-libexecdir
-datarootdir
-datadir
-sysconfdir
-sharedstatedir
-localstatedir
-includedir
-oldincludedir
-docdir
-infodir
-htmldir
-dvidir
-pdfdir
-psdir
-libdir
-localedir
-mandir
-DEFS
-ECHO_C
-ECHO_N
-ECHO_T
-LIBS
-build_alias
-host_alias
-target_alias
-build
-build_cpu
-build_vendor
-build_os
-host
-host_cpu
-host_vendor
-host_os
-target
-target_cpu
-target_vendor
-target_os
-INSTALL_PROGRAM
-INSTALL_SCRIPT
-INSTALL_DATA
-CC
-am__leading_dot
-DEPDIR
-am__include
-am__quote
-AMDEP_TRUE
-AMDEP_FALSE
-AMDEPBACKSLASH
-CCDEPMODE
-am__fastdepCC_TRUE
-am__fastdepCC_FALSE
-AS
-AR
-LD
-RANLIB
-CCAS
-CCASFLAGS
-host_makefile_frag_path
-target_makefile_frag_path
-part_specific_obj
-part_specific_defines
-script_list
-bsp_list
-crt0
-pcrt0
-LIBOBJS
-LTLIBOBJS'
-ac_subst_files='host_makefile_frag
-target_makefile_frag'
-      ac_precious_vars='build_alias
-host_alias
-target_alias
-CCAS
-CCASFLAGS'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
-  # If the previous option needs an argument, assign it.
-  if test -n "$ac_prev"; then
-    eval $ac_prev=\$ac_option
-    ac_prev=
-    continue
-  fi
-
-  case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
-  esac
-
-  # Accept the important Cygnus configure options, so we can diagnose typos.
-
-  case $ac_dashdash$ac_option in
-  --)
-    ac_dashdash=yes ;;
-
-  -bindir | --bindir | --bindi | --bind | --bin | --bi)
-    ac_prev=bindir ;;
-  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
-    bindir=$ac_optarg ;;
-
-  -build | --build | --buil | --bui | --bu)
-    ac_prev=build_alias ;;
-  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
-    build_alias=$ac_optarg ;;
-
-  -cache-file | --cache-file | --cache-fil | --cache-fi \
-  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-    ac_prev=cache_file ;;
-  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
-    cache_file=$ac_optarg ;;
-
-  --config-cache | -C)
-    cache_file=config.cache ;;
-
-  -datadir | --datadir | --datadi | --datad)
-    ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=*)
-    datadir=$ac_optarg ;;
-
-  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
-  | --dataroo | --dataro | --datar)
-    ac_prev=datarootdir ;;
-  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
-  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
-    datarootdir=$ac_optarg ;;
-
-  -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=no ;;
-
-  -docdir | --docdir | --docdi | --doc | --do)
-    ac_prev=docdir ;;
-  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
-    docdir=$ac_optarg ;;
-
-  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
-    ac_prev=dvidir ;;
-  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
-    dvidir=$ac_optarg ;;
-
-  -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
-    eval enable_$ac_feature=\$ac_optarg ;;
-
-  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
-  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-  | --exec | --exe | --ex)
-    ac_prev=exec_prefix ;;
-  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
-  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
-  | --exec=* | --exe=* | --ex=*)
-    exec_prefix=$ac_optarg ;;
-
-  -gas | --gas | --ga | --g)
-    # Obsolete; use --with-gas.
-    with_gas=yes ;;
-
-  -help | --help | --hel | --he | -h)
-    ac_init_help=long ;;
-  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
-    ac_init_help=recursive ;;
-  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
-    ac_init_help=short ;;
-
-  -host | --host | --hos | --ho)
-    ac_prev=host_alias ;;
-  -host=* | --host=* | --hos=* | --ho=*)
-    host_alias=$ac_optarg ;;
-
-  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
-    ac_prev=htmldir ;;
-  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
-  | --ht=*)
-    htmldir=$ac_optarg ;;
-
-  -includedir | --includedir | --includedi | --included | --include \
-  | --includ | --inclu | --incl | --inc)
-    ac_prev=includedir ;;
-  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
-  | --includ=* | --inclu=* | --incl=* | --inc=*)
-    includedir=$ac_optarg ;;
-
-  -infodir | --infodir | --infodi | --infod | --info | --inf)
-    ac_prev=infodir ;;
-  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
-    infodir=$ac_optarg ;;
-
-  -libdir | --libdir | --libdi | --libd)
-    ac_prev=libdir ;;
-  -libdir=* | --libdir=* | --libdi=* | --libd=*)
-    libdir=$ac_optarg ;;
-
-  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
-  | --libexe | --libex | --libe)
-    ac_prev=libexecdir ;;
-  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
-  | --libexe=* | --libex=* | --libe=*)
-    libexecdir=$ac_optarg ;;
-
-  -localedir | --localedir | --localedi | --localed | --locale)
-    ac_prev=localedir ;;
-  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
-    localedir=$ac_optarg ;;
-
-  -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst | --locals)
-    ac_prev=localstatedir ;;
-  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
-    localstatedir=$ac_optarg ;;
-
-  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
-    ac_prev=mandir ;;
-  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
-    mandir=$ac_optarg ;;
-
-  -nfp | --nfp | --nf)
-    # Obsolete; use --without-fp.
-    with_fp=no ;;
-
-  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
-  | --no-cr | --no-c | -n)
-    no_create=yes ;;
-
-  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
-  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
-    no_recursion=yes ;;
-
-  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
-  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
-  | --oldin | --oldi | --old | --ol | --o)
-    ac_prev=oldincludedir ;;
-  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
-  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
-  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
-    oldincludedir=$ac_optarg ;;
-
-  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-    ac_prev=prefix ;;
-  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-    prefix=$ac_optarg ;;
-
-  -program-prefix | --program-prefix | --program-prefi | --program-pref \
-  | --program-pre | --program-pr | --program-p)
-    ac_prev=program_prefix ;;
-  -program-prefix=* | --program-prefix=* | --program-prefi=* \
-  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
-    program_prefix=$ac_optarg ;;
-
-  -program-suffix | --program-suffix | --program-suffi | --program-suff \
-  | --program-suf | --program-su | --program-s)
-    ac_prev=program_suffix ;;
-  -program-suffix=* | --program-suffix=* | --program-suffi=* \
-  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
-    program_suffix=$ac_optarg ;;
-
-  -program-transform-name | --program-transform-name \
-  | --program-transform-nam | --program-transform-na \
-  | --program-transform-n | --program-transform- \
-  | --program-transform | --program-transfor \
-  | --program-transfo | --program-transf \
-  | --program-trans | --program-tran \
-  | --progr-tra | --program-tr | --program-t)
-    ac_prev=program_transform_name ;;
-  -program-transform-name=* | --program-transform-name=* \
-  | --program-transform-nam=* | --program-transform-na=* \
-  | --program-transform-n=* | --program-transform-=* \
-  | --program-transform=* | --program-transfor=* \
-  | --program-transfo=* | --program-transf=* \
-  | --program-trans=* | --program-tran=* \
-  | --progr-tra=* | --program-tr=* | --program-t=*)
-    program_transform_name=$ac_optarg ;;
-
-  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
-    ac_prev=pdfdir ;;
-  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
-    pdfdir=$ac_optarg ;;
-
-  -psdir | --psdir | --psdi | --psd | --ps)
-    ac_prev=psdir ;;
-  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
-    psdir=$ac_optarg ;;
-
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil)
-    silent=yes ;;
-
-  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
-    ac_prev=sbindir ;;
-  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
-  | --sbi=* | --sb=*)
-    sbindir=$ac_optarg ;;
-
-  -sharedstatedir | --sharedstatedir | --sharedstatedi \
-  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
-  | --sharedst | --shareds | --shared | --share | --shar \
-  | --sha | --sh)
-    ac_prev=sharedstatedir ;;
-  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
-  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
-  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
-  | --sha=* | --sh=*)
-    sharedstatedir=$ac_optarg ;;
-
-  -site | --site | --sit)
-    ac_prev=site ;;
-  -site=* | --site=* | --sit=*)
-    site=$ac_optarg ;;
-
-  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-    ac_prev=srcdir ;;
-  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-    srcdir=$ac_optarg ;;
-
-  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
-  | --syscon | --sysco | --sysc | --sys | --sy)
-    ac_prev=sysconfdir ;;
-  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
-  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
-    sysconfdir=$ac_optarg ;;
-
-  -target | --target | --targe | --targ | --tar | --ta | --t)
-    ac_prev=target_alias ;;
-  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
-    target_alias=$ac_optarg ;;
-
-  -v | -verbose | --verbose | --verbos | --verbo | --verb)
-    verbose=yes ;;
-
-  -version | --version | --versio | --versi | --vers | -V)
-    ac_init_version=: ;;
-
-  -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=\$ac_optarg ;;
-
-  -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
-    eval with_$ac_package=no ;;
-
-  --x)
-    # Obsolete; use --with-x.
-    with_x=yes ;;
-
-  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
-  | --x-incl | --x-inc | --x-in | --x-i)
-    ac_prev=x_includes ;;
-  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
-  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
-    x_includes=$ac_optarg ;;
-
-  -x-libraries | --x-libraries | --x-librarie | --x-librari \
-  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
-    ac_prev=x_libraries ;;
-  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
-  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
-    x_libraries=$ac_optarg ;;
-
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
-    ;;
-
-  *=*)
-    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
-    # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    eval $ac_envvar=\$ac_optarg
-    export $ac_envvar ;;
-
-  *)
-    # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
-    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
-    : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
-    ;;
-
-  esac
-done
-
-if test -n "$ac_prev"; then
-  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute directory names.
-for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
-		datadir sysconfdir sharedstatedir localstatedir includedir \
-		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
-do
-  eval ac_val=\$$ac_var
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* )  continue;;
-    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
-  esac
-  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; }
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
-  if test "x$build_alias" = x; then
-    cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used." >&2
-  elif test "x$build_alias" != "x$host_alias"; then
-    cross_compiling=yes
-  fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { echo "$as_me: error: Working directory cannot be determined" >&2
-   { (exit 1); exit 1; }; }
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { echo "$as_me: error: pwd does not report name of working directory" >&2
-   { (exit 1); exit 1; }; }
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
-  ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then the parent directory.
-  ac_confdir=`$as_dirname -- "$0" ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  srcdir=$ac_confdir
-  if test ! -r "$srcdir/$ac_unique_file"; then
-    srcdir=..
-  fi
-else
-  ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
-  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
-   { (exit 1); exit 1; }; }
-	pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
-  srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
-  eval ac_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_env_${ac_var}_value=\$${ac_var}
-  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
-  eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
-  # Omit some internal or obsolete options to make the list less imposing.
-  # This message is too long to be a string in the A/UX 3.1 sh.
-  cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE.  See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
-  -h, --help              display this help and exit
-      --help=short        display options specific to this package
-      --help=recursive    display the short help of all the included packages
-  -V, --version           display version information and exit
-  -q, --quiet, --silent   do not print \`checking...' messages
-      --cache-file=FILE   cache test results in FILE [disabled]
-  -C, --config-cache      alias for \`--cache-file=config.cache'
-  -n, --no-create         do not create output files
-      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
-
-Installation directories:
-  --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
-  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
-  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
-  --infodir=DIR          info documentation [DATAROOTDIR/info]
-  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
-  --mandir=DIR           man documentation [DATAROOTDIR/man]
-  --docdir=DIR           documentation root [DATAROOTDIR/doc/PACKAGE]
-  --htmldir=DIR          html documentation [DOCDIR]
-  --dvidir=DIR           dvi documentation [DOCDIR]
-  --pdfdir=DIR           pdf documentation [DOCDIR]
-  --psdir=DIR            ps documentation [DOCDIR]
-_ACEOF
-
-  cat <<\_ACEOF
-
-Program names:
-  --program-prefix=PREFIX            prepend PREFIX to installed program names
-  --program-suffix=SUFFIX            append SUFFIX to installed program names
-  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
-
-System types:
-  --build=BUILD     configure for building on BUILD [guessed]
-  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
-  --target=TARGET   configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
-  cat <<\_ACEOF
-
-Optional Features:
-  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
-  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
-  --disable-dependency-tracking  speeds up one-time build
-  --enable-dependency-tracking   do not reject slow dependency extractors
-
-Some influential environment variables:
-  CCAS        assembler compiler command (defaults to CC)
-  CCASFLAGS   assembler compiler flags (defaults to CFLAGS)
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
-  # If there are subdirs, report their specific --help.
-  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d "$ac_dir" || continue
-    ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-    cd "$ac_dir" || { ac_status=$?; continue; }
-    # Check for guested configure.
-    if test -f "$ac_srcdir/configure.gnu"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
-    elif test -f "$ac_srcdir/configure"; then
-      echo &&
-      $SHELL "$ac_srcdir/configure" --help=recursive
-    else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi || ac_status=$?
-    cd "$ac_pwd" || { ac_status=$?; break; }
-  done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
-  cat <<\_ACEOF
-configure
-generated by GNU Autoconf 2.61
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
-  exit
-fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
-
-  $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
-
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      ac_configure_args="$ac_configure_args '$ac_arg'"
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
-
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-	"s/'\''/'\''\\\\'\'''\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
-
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
-
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=\$$ac_var
-	case $ac_val in
-	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-	esac
-	echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
-
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -n "$CONFIG_SITE"; then
-  set x "$CONFIG_SITE"
-elif test "x$prefix" != xNONE; then
-  set x "$prefix/share/config.site" "$prefix/etc/config.site"
-else
-  set x "$ac_default_prefix/share/config.site" \
-	"$ac_default_prefix/etc/config.site"
-fi
-shift
-for ac_site_file
-do
-  if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
-
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
-else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-if test "${enable_shared}" = "yes" ; then
-    echo "Shared libraries not supported for cross compiling, ignored"
-fi
-
-if test "$srcdir" = "." ; then
-  if test "${with_target_subdir}" != "." ; then
-    libgloss_topdir="${srcdir}/${with_multisrctop}../../.."
-  else
-    libgloss_topdir="${srcdir}/${with_multisrctop}../.."
-  fi
-else
-  libgloss_topdir="${srcdir}/../.."
-fi
-ac_aux_dir=
-for ac_dir in $libgloss_topdir "$srcdir"/$libgloss_topdir; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $libgloss_topdir \"$srcdir\"/$libgloss_topdir" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $libgloss_topdir \"$srcdir\"/$libgloss_topdir" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
-
-
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-{ echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-echo "$as_me: error: invalid value of canonical build" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "x$host_alias" = x; then
-  ac_cv_host=$ac_cv_build
-else
-  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-echo "$as_me: error: invalid value of canonical host" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
-if test "${ac_cv_target+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test "x$target_alias" = x; then
-  ac_cv_target=$ac_cv_host
-else
-  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
-    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
-echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5
-echo "$as_me: error: invalid value of canonical target" >&2;}
-   { (exit 1); exit 1; }; };;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-test "$program_prefix" != NONE &&
-  program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm -f conftest.sed
-
-
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-done
-IFS=$as_save_IFS
-
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
-fi
-
-
-{ echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
-  enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
-  AMDEP_TRUE=
-  AMDEP_FALSE='#'
-else
-  AMDEP_TRUE='#'
-  AMDEP_FALSE=
-fi
-
-
-
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-
-depcc="$CC"   am_compiler_list=
-
-{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_CC_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
-  fi
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
-      # Solaris 8's {/usr,}/bin/sh.
-      touch sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    case $depmode in
-    nosideeffect)
-      # after this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    none) break ;;
-    esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
-    if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_CC_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
-  am__fastdepCC_TRUE=
-  am__fastdepCC_FALSE='#'
-else
-  am__fastdepCC_TRUE='#'
-  am__fastdepCC_FALSE=
-fi
-
-
-if test -z "$CC"; then
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$CC"; then
-  ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-  ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
-       ac_prog_rejected=yes
-       continue
-     fi
-    ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
-  # We found a bogon in the path, so make sure we never use it.
-  set dummy $ac_cv_prog_CC
-  shift
-  if test $# != 0; then
-    # We chose a different compiler from the bogus one.
-    # However, it has the same basename, so the bogon will be chosen
-    # first if we set CC to just the basename; use the full file name.
-    shift
-    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
-  fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
-  { echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-  test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5
-echo "$as_me: error: no acceptable cc found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-{ echo "$as_me:$LINENO: checking whether we are using GNU C" >&5
-echo $ECHO_N "checking whether we are using GNU C... $ECHO_C" >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then
-  ac_cv_c_compiler_gnu=yes
-else
-  ac_cv_c_compiler_gnu=no
-fi
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
-
-if test $ac_cv_c_compiler_gnu = yes; then
-  GCC=yes
-  ac_test_CFLAGS="${CFLAGS+set}"
-  ac_save_CFLAGS="$CFLAGS"
-  CFLAGS=
-  ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_save_c_werror_flag=$ac_c_werror_flag
-   ac_c_werror_flag=yes
-   ac_cv_prog_cc_g=no
-   CFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_c_werror_flag=$ac_save_c_werror_flag
-	 CFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_cc_g=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-   ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
-  CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
-  if test "$GCC" = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-g"
-  fi
-else
-  if test "$GCC" = yes; then
-    CFLAGS="-O2"
-  else
-    CFLAGS=
-  fi
-fi
-  if test "$ac_test_CFLAGS" = set; then
-    CFLAGS="$ac_save_CFLAGS"
-  elif test $ac_cv_prog_cc_g = yes; then
-    CFLAGS="-g -O2"
-  else
-    CFLAGS="-O2"
-  fi
-else
-  GCC=
-  test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
-
-AS=${AS-as}
-
-AR=${AR-ar}
-
-LD=${LD-ld}
-
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
-else
-  { echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6; }
-fi
-
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&5
-echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
-whose name does not start with the host triplet.  If you think this
-configuration is useful to you, please write to autoconf@gnu.org." >&2;}
-ac_tool_warned=yes ;;
-esac
-    RANLIB=$ac_ct_RANLIB
-  fi
-else
-  RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-# By default we simply use the C compiler to build assembly code.
-
-test "${CCAS+set}" = set || CCAS=$CC
-test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
-
-
-
-
-crt0=crt0.o
-pcrt0=pcrt0.o
-
-case "${target}" in
-  mips*-tx39*-*|mipstx39*-*-*)
-        part_specific_obj=
-	part_specific_defines=
-        script_list="dve idt jmr3904app jmr3904dram jmr3904dram-java jmr3904app-java"
-        bsp_list="libdve.a libidt.a libjmr3904.a"
-        ;;
-  mipsisa32-*-* | mipsisa32el-*-* | \
-  mipsisa32r2-*-* | mipsisa32r2el-*-* | \
-  mipsisa64*-*-*)
-	crt0="crt0_cfe.o crt0_cygmon.o crt0.o"
-	pcrt0="pcrt0.o"
-	part_specific_obj=
-	part_specific_defines=
-	script_list="idt32 idt64 cfe"
-	bsp_list="libcygmon.a libidt.a libcfe.a"
-	;;
-  mips*-lsi*-*)
-	part_specific_obj=entry.o
-	part_specific_defines=
-        script_list="lsi"
-        bsp_list=liblsi.a
-	;;
-  mips64vr5*-*-*)
-	part_specific_obj="vr5xxx.o cma101.o"
-	part_specific_defines=-DR5000
-        script_list="idt pmon ddb ddb-kseg0 lsi idtecoff nullmon"
-        bsp_list="libidt.a libpmon.a liblsi.a libnullmon.a"
-	;;
-  mips64vr-*-* | mips64vrel-*-*)
-	part_specific_obj="vr5xxx.o cma101.o"
-	script_list="ddb ddb-kseg0 nullmon"
-	bsp_list="libpmon.a libnullmon.a"
-	;;
-  *)
-	crt0="crt0_cfe.o crt0.o"
-        part_specific_obj="vr4300.o cma101.o"
-	part_specific_defines=
-        script_list="idt pmon ddb ddb-kseg0 lsi cfe idtecoff nullmon"
-        bsp_list="libidt.a libpmon.a liblsi.a libcfe.a libnullmon.a"
-        ;;
-esac
-
-host_makefile_frag=${srcdir}/../config/default.mh
-target_makefile_frag=${srcdir}/../config/mips.mt
-
-host_makefile_frag_path=$host_makefile_frag
-
-
-target_makefile_frag_path=$target_makefile_frag
-
-
-
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
-echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
-
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
-      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
-echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
-  else
-    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-t clear
-:clear
-s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
-	g
-	s/^\n//
-	s/\n/ /g
-	p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
-
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-as_nl='
-'
-IFS=" ""	$as_nl"
-
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
-
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
-
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
-# CDPATH.
-$as_unset CDPATH
-
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
-
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir
-fi
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s='ln -s'
-  # ... but there are two gotchas:
-  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-  # In both cases, we have to default to `cp -p'.
-  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-    as_ln_s='cp -p'
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-        test -d "$1/.";
-      else
-	case $1 in
-        -*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.61.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.61,
-  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2006 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    echo "$ac_cs_version"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --he | --h |  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1"
-     ac_need_defaults=false ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
-  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  CONFIG_SHELL=$SHELL
-  export CONFIG_SHELL
-  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-srcdir=${srcdir}
-target=${target}
-with_multisubdir=${with_multisubdir}
-ac_configure_args="${ac_configure_args} --enable-multilib"
-CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-libgloss_topdir=${libgloss_topdir}
-
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp=
-  trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-#
-# Set up the sed scripts for CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-
-_ACEOF
-
-# Create sed commands to just substitute file output variables.
-
-# Remaining file output variables are in a fragment that also has non-file
-# output varibles.
-
-
-
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  cat >conf$$subs.sed <<_ACEOF
-SHELL!$SHELL$ac_delim
-PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
-PACKAGE_NAME!$PACKAGE_NAME$ac_delim
-PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
-PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
-PACKAGE_STRING!$PACKAGE_STRING$ac_delim
-PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
-exec_prefix!$exec_prefix$ac_delim
-prefix!$prefix$ac_delim
-program_transform_name!$program_transform_name$ac_delim
-bindir!$bindir$ac_delim
-sbindir!$sbindir$ac_delim
-libexecdir!$libexecdir$ac_delim
-datarootdir!$datarootdir$ac_delim
-datadir!$datadir$ac_delim
-sysconfdir!$sysconfdir$ac_delim
-sharedstatedir!$sharedstatedir$ac_delim
-localstatedir!$localstatedir$ac_delim
-includedir!$includedir$ac_delim
-oldincludedir!$oldincludedir$ac_delim
-docdir!$docdir$ac_delim
-infodir!$infodir$ac_delim
-htmldir!$htmldir$ac_delim
-dvidir!$dvidir$ac_delim
-pdfdir!$pdfdir$ac_delim
-psdir!$psdir$ac_delim
-libdir!$libdir$ac_delim
-localedir!$localedir$ac_delim
-mandir!$mandir$ac_delim
-DEFS!$DEFS$ac_delim
-ECHO_C!$ECHO_C$ac_delim
-ECHO_N!$ECHO_N$ac_delim
-ECHO_T!$ECHO_T$ac_delim
-LIBS!$LIBS$ac_delim
-build_alias!$build_alias$ac_delim
-host_alias!$host_alias$ac_delim
-target_alias!$target_alias$ac_delim
-build!$build$ac_delim
-build_cpu!$build_cpu$ac_delim
-build_vendor!$build_vendor$ac_delim
-build_os!$build_os$ac_delim
-host!$host$ac_delim
-host_cpu!$host_cpu$ac_delim
-host_vendor!$host_vendor$ac_delim
-host_os!$host_os$ac_delim
-target!$target$ac_delim
-target_cpu!$target_cpu$ac_delim
-target_vendor!$target_vendor$ac_delim
-target_os!$target_os$ac_delim
-INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
-INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
-INSTALL_DATA!$INSTALL_DATA$ac_delim
-CC!$CC$ac_delim
-am__leading_dot!$am__leading_dot$ac_delim
-DEPDIR!$DEPDIR$ac_delim
-am__include!$am__include$ac_delim
-am__quote!$am__quote$ac_delim
-AMDEP_TRUE!$AMDEP_TRUE$ac_delim
-AMDEP_FALSE!$AMDEP_FALSE$ac_delim
-AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
-CCDEPMODE!$CCDEPMODE$ac_delim
-am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
-am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
-AS!$AS$ac_delim
-AR!$AR$ac_delim
-LD!$LD$ac_delim
-RANLIB!$RANLIB$ac_delim
-CCAS!$CCAS$ac_delim
-CCASFLAGS!$CCASFLAGS$ac_delim
-host_makefile_frag_path!$host_makefile_frag_path$ac_delim
-target_makefile_frag_path!$target_makefile_frag_path$ac_delim
-part_specific_obj!$part_specific_obj$ac_delim
-part_specific_defines!$part_specific_defines$ac_delim
-script_list!$script_list$ac_delim
-bsp_list!$bsp_list$ac_delim
-crt0!$crt0$ac_delim
-pcrt0!$pcrt0$ac_delim
-LIBOBJS!$LIBOBJS$ac_delim
-LTLIBOBJS!$LTLIBOBJS$ac_delim
-_ACEOF
-
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 79; then
-    break
-  elif $ac_last_try; then
-    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
-if test -n "$ac_eof"; then
-  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
-  ac_eof=`expr $ac_eof + 1`
-fi
-
-cat >>$CONFIG_STATUS <<_ACEOF
-cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
-/^[	 ]*@host_makefile_frag@[	 ]*$/{
-r $host_makefile_frag
-d
-}
-/^[	 ]*@target_makefile_frag@[	 ]*$/{
-r $target_makefile_frag
-d
-}
-_ACEOF
-sed '
-s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
-s/^/s,@/; s/!/@,|#_!!_#|/
-:n
-t n
-s/'"$ac_delim"'$/,g/; t
-s/$/\\/; p
-N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
-' >>$CONFIG_STATUS <conf$$subs.sed
-rm -f conf$$subs.sed
-cat >>$CONFIG_STATUS <<_ACEOF
-:end
-s/|#_!!_#|//g
-CEOF$ac_eof
-_ACEOF
-
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[	 ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-fi # test -n "$CONFIG_FILES"
-
-
-for ac_tag in  :F $CONFIG_FILES      :C $CONFIG_COMMANDS
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
-echo "$as_me: error: Invalid tag $ac_tag." >&2;}
-   { (exit 1); exit 1; }; };;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
-
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain `:'.
-	 test -f "$ac_f" ||
-	   case $ac_f in
-	   [\\/$]*) false;;
-	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-	   esac ||
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-   { (exit 1); exit 1; }; };;
-      esac
-      ac_file_inputs="$ac_file_inputs $ac_f"
-    done
-
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input="Generated from "`IFS=:
-	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    fi
-
-    case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin";;
-    esac
-    ;;
-  esac
-
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  { as_dir="$ac_dir"
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-  ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-
-case `sed -n '/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-' $ac_file_inputs` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-    s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s&@configure_input@&$configure_input&;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-$ac_datarootdir_hack
-" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
-echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
-
-  rm -f "$tmp/stdin"
-  case $ac_file in
-  -) cat "$tmp/out"; rm -f "$tmp/out";;
-  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
-  esac
- ;;
-
-
-  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
-echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
-
-
-  case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$mf" : 'X\(//\)[^/]' \| \
-	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$file" : 'X\(//\)[^/]' \| \
-	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
- ;;
-    "Makefile":F) . ${libgloss_topdir}/config-ml.in ;;
-
-  esac
-done # for ac_tag
-
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded.  So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status.  When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
-  ac_cs_success=:
-  ac_config_status_args=
-  test "$silent" = yes &&
-    ac_config_status_args="$ac_config_status_args --quiet"
-  exec 5>/dev/null
-  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
-  exec 5>>config.log
-  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
-  # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
-fi
-
diff --git a/libgloss/mips/configure.in b/libgloss/mips/configure.in
deleted file mode 100644
index e7945c732..000000000
--- a/libgloss/mips/configure.in
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright (c) 1995, 1996, 1997, 1998, 1999, 2000, 2002 Cygnus Support
-#
-# The authors hereby grant permission to use, copy, modify, distribute,
-# and license this software and its documentation for any purpose, provided
-# that existing copyright notices are retained in all copies and that this
-# notice is included verbatim in any distributions. No written agreement,
-# license, or royalty fee is required for any of the authorized uses.
-# Modifications to this software may be copyrighted by their authors
-# and need not follow the licensing terms described here, provided that
-# the new terms are clearly indicated on the first page of each file where
-# they apply.
-#
-# Process this file with autoconf to produce a configure script.
-#
-AC_PREREQ(2.59)
-AC_INIT(crt0.S)
-
-if test "${enable_shared}" = "yes" ; then
-    echo "Shared libraries not supported for cross compiling, ignored"
-fi
-
-if test "$srcdir" = "." ; then
-  if test "${with_target_subdir}" != "." ; then
-    libgloss_topdir="${srcdir}/${with_multisrctop}../../.."
-  else
-    libgloss_topdir="${srcdir}/${with_multisrctop}../.."
-  fi
-else
-  libgloss_topdir="${srcdir}/../.."
-fi
-AC_CONFIG_AUX_DIR($libgloss_topdir)
-
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
-
-AC_PROG_INSTALL
-
-LIB_AC_PROG_CC
-AS=${AS-as}
-AC_SUBST(AS)
-AR=${AR-ar}
-AC_SUBST(AR)
-LD=${LD-ld}
-AC_SUBST(LD)
-AC_PROG_RANLIB
-LIB_AM_PROG_AS
-
-crt0=crt0.o
-pcrt0=pcrt0.o
-
-case "${target}" in
-  mips*-tx39*-*|mipstx39*-*-*)
-        part_specific_obj=
-	part_specific_defines=
-        script_list="dve idt jmr3904app jmr3904dram jmr3904dram-java jmr3904app-java"
-        bsp_list="libdve.a libidt.a libjmr3904.a"
-        ;;
-  mipsisa32-*-* | mipsisa32el-*-* | \
-  mipsisa32r2-*-* | mipsisa32r2el-*-* | \
-  mipsisa64*-*-*)
-	crt0="crt0_cfe.o crt0_cygmon.o crt0.o"
-	pcrt0="pcrt0.o"
-	part_specific_obj=
-	part_specific_defines=
-	script_list="idt32 idt64 cfe"
-	bsp_list="libcygmon.a libidt.a libcfe.a"
-	;;
-  mips*-lsi*-*)
-	part_specific_obj=entry.o
-	part_specific_defines=
-        script_list="lsi"
-        bsp_list=liblsi.a
-	;;
-  mips64vr5*-*-*)
-	part_specific_obj="vr5xxx.o cma101.o"
-	part_specific_defines=-DR5000
-        script_list="idt pmon ddb ddb-kseg0 lsi idtecoff nullmon"
-        bsp_list="libidt.a libpmon.a liblsi.a libnullmon.a"
-	;;
-  mips64vr-*-* | mips64vrel-*-*)
-	part_specific_obj="vr5xxx.o cma101.o"
-	script_list="ddb ddb-kseg0 nullmon"
-	bsp_list="libpmon.a libnullmon.a"
-	;;
-  *)
-	crt0="crt0_cfe.o crt0.o"
-        part_specific_obj="vr4300.o cma101.o"
-	part_specific_defines=
-        script_list="idt pmon ddb ddb-kseg0 lsi cfe idtecoff nullmon"
-        bsp_list="libidt.a libpmon.a liblsi.a libcfe.a libnullmon.a"
-        ;;
-esac
-
-host_makefile_frag=${srcdir}/../config/default.mh
-target_makefile_frag=${srcdir}/../config/mips.mt
-
-dnl We have to assign the same value to other variables because autoconf
-dnl doesn't provide a mechanism to substitute a replacement keyword with
-dnl arbitrary data or pathnames.
-dnl
-host_makefile_frag_path=$host_makefile_frag
-AC_SUBST(host_makefile_frag_path)
-AC_SUBST_FILE(host_makefile_frag)
-target_makefile_frag_path=$target_makefile_frag
-AC_SUBST(target_makefile_frag_path)
-AC_SUBST_FILE(target_makefile_frag)
-AC_SUBST(part_specific_obj)
-AC_SUBST(part_specific_defines)
-AC_SUBST(script_list)
-AC_SUBST(bsp_list)
-AC_SUBST(crt0)
-AC_SUBST(pcrt0)
-
-AC_CONFIG_FILES(Makefile,
-. ${libgloss_topdir}/config-ml.in,
-srcdir=${srcdir}
-target=${target}
-with_multisubdir=${with_multisubdir}
-ac_configure_args="${ac_configure_args} --enable-multilib"
-CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-libgloss_topdir=${libgloss_topdir}
-)
-AC_OUTPUT
diff --git a/libgloss/mips/crt0.S b/libgloss/mips/crt0.S
deleted file mode 100644
index 599e79c60..000000000
--- a/libgloss/mips/crt0.S
+++ /dev/null
@@ -1,288 +0,0 @@
-/*
- * crt0.S -- startup file for MIPS.
- *
- * Copyright (c) 1995, 1996, 1997, 2001 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#include "regs.S"
-
-/*
- * Set up some room for a stack. We just grab a chunk of memory.
- */
-#define STACK_SIZE  0x4000
-#define GLOBAL_SIZE 0x2000
-
-#define STARTUP_STACK_SIZE	0x0100
-
-/* This is for referencing addresses that are not in the .sdata or
-   .sbss section under embedded-pic, or before we've set up gp.  */
-#ifdef __mips_embedded_pic
-# ifdef __mips64
-#  define LA(t,x) la t,x-PICBASE ; daddu t,s0,t
-# else
-#  define LA(t,x) la t,x-PICBASE ; addu t,s0,t
-# endif
-#else /* __mips_embedded_pic */
-# define LA(t,x) la t,x
-#endif /* __mips_embedded_pic */
-
-	.comm	__memsize, 12
-	.comm	__lstack, STARTUP_STACK_SIZE
-
-	.text
-	.align	2
-
-/* Without the following nop, GDB thinks _start is a data variable.
- * This is probably a bug in GDB in handling a symbol that is at the
- * start of the .text section.
- */
-	nop
-
-	.globl	hardware_hazard_hook .text
-	.globl	_start
-	.ent	_start
-_start:
-	.set	noreorder
-#ifdef __mips_embedded_pic
-#define PICBASE start_PICBASE
-	PICBASE = .+8
-        bal	PICBASE
-	nop
-	move	s0,$31
-#endif
-#if __mips<3
-#  define STATUS_MASK (SR_CU1|SR_PE)
-#else
-/* Post-mips2 has no SR_PE bit.  */
-#  ifdef __mips64
-/* Turn on 64-bit addressing and additional float regs.  */
-#    define STATUS_MASK (SR_CU1|SR_FR|SR_KX|SR_SX|SR_UX)
-#  else
-#    if __mips_fpr==32
-#      define STATUS_MASK (SR_CU1)
-#    else
-/* Turn on additional float regs.  */
-#      define STATUS_MASK (SR_CU1|SR_FR)
-#    endif
-#  endif
-#endif
-	li	v0, STATUS_MASK
-	mtc0	v0, C0_SR
-	mtc0	zero, C0_CAUSE
-	nop
-
-	/* Avoid hazard from FPU enable and other SR changes.  */
-	LA (t0, hardware_hazard_hook)
-	beq	t0,zero,1f
-	nop
-	jal	t0
-	nop
-1:
-
-/* Check for FPU presence.  Don't check if we know that soft_float is
-   being used.  (This also avoids illegal instruction exceptions.)  */
-
-#ifndef __mips_soft_float
-	li	t2,0xAAAA5555
-	mtc1	t2,fp0		/* write to FPR 0 */
-	mtc1	zero,fp1	/* write to FPR 1 */
-	mfc1	t0,fp0
-	mfc1	t1,fp1
-	nop
-	bne	t0,t2,1f	/* check for match */
-	nop
-	bne	t1,zero,1f	/* double check */
-	nop
-	j	2f		/* FPU is present. */
-	nop
-#endif
-1:
-	/* FPU is not present.  Set status register to say that. */
-	li	v0, (STATUS_MASK-(STATUS_MASK & SR_CU1))
-	mtc0	v0, C0_SR
-	nop
-	/* Avoid hazard from FPU disable.  */
-	LA (t0, hardware_hazard_hook)
-	beq	t0,zero,2f
-	nop
-	jal	t0
-	nop
-2:
-
-
-/* Fix high bits, if any, of the PC so that exception handling
-   doesn't get confused.  */
-	LA (v0, 3f)
-	jr	v0
-	nop
-3:
-	LA (gp, _gp)				# set the global data pointer
-	.end _start
-
-/*
- * zero out the bss section.
- */
-	.globl	__memsize
-	.globl	get_mem_info .text
-	.globl	__stack
-	.globl	__global
-	.ent	zerobss
-zerobss:
-	LA (v0, _fbss)
-	LA (v1, _end)
-3:
-	sw	zero,0(v0)
-	bltu	v0,v1,3b
-	addiu	v0,v0,4				# executed in delay slot
-
-	la	t0, __lstack			# make a small stack so we
-	addiu	sp, t0, STARTUP_STACK_SIZE	# can run some C code
-	la	a0, __memsize			# get the usable memory size
-	jal	get_mem_info
-	nop
-
-	/* setup the stack pointer */
-	LA (t0, __stack)			# is __stack set ?
-	bne	t0,zero,4f
-	nop
-
-	/* NOTE: a0[0] contains the amount of memory available, and
-	         not the last memory address. */
-	la	a0, __memsize
-	lw	t0,0(a0)			# last address of memory available
-	la	t1,K0BASE			# cached kernel memory
-	addu	t0,t0,t1			# get the end of memory address
-	/* Allocate 32 bytes for the register parameters.  Allocate 16
-	   bytes for a null argv and envp.  Round the result up to 64
-	   bytes to preserve alignment.  */
-	subu	t0,t0,64
-4:
-	move	sp,t0				# set stack pointer
-	.end	zerobss
-
-/*
- * initialize target specific stuff. Only execute these
- * functions it they exist.
- */
-	.globl	hardware_init_hook .text
-	.globl	software_init_hook .text
-	.type	_fini,@function
-	.type	_init,@function
-	.globl	atexit .text
-	.globl	exit .text
-	.ent	init
-init:
-	LA (t9, hardware_init_hook)		# init the hardware if needed
-	beq	t9,zero,6f
-	nop
-	jal	t9
-	nop
-6:
-	LA (t9, software_init_hook)		# init the hardware if needed
-	beq	t9,zero,7f
-	nop
-	jal	t9
-	nop
-7:
-	LA (a0, _fini)
-	jal	atexit
-	nop
-
-#ifdef GCRT0
-	.globl	_ftext
-	.globl	_extext
-	LA (a0, _ftext)
-	LA (a1, _etext)
-	jal	monstartup
-	nop
-#endif
-
-
-	jal	_init				# run global constructors
-	nop
-
-	addiu	a1,sp,32			# argv = sp + 32
-	addiu	a2,sp,40			# envp = sp + 40
-#if __mips64
-	sd	zero,(a1)			# argv[argc] = 0
-	sd	zero,(a2)			# envp[0] = 0
-#else
-	sw	zero,(a1)
-	sw	zero,(a2)
-#endif
-	jal	main				# call the program start function
-	move	a0,zero				# set argc to 0
-
-	# fall through to the "exit" routine
-	jal	exit				# call libc exit to run the G++
-						# destructors
-	move	a0,v0				# pass through the exit code
-	.end	init
-
- 
-/* Assume the PICBASE set up above is no longer valid below here.  */
-#ifdef __mips_embedded_pic
-#undef PICBASE
-#endif
-	
-/*
- * _exit -- Exit from the application. Normally we cause a user trap
- *          to return to the ROM monitor for another run. NOTE: This is
- *	    the only other routine we provide in the crt0.o object, since
- *          it may be tied to the "_start" routine. It also allows
- *          executables that contain a complete world to be linked with
- *          just the crt0.o object.
- */
-	.globl	hardware_exit_hook .text
-	.globl	_exit
-	.ent _exit
-_exit:
-7:
-#ifdef __mips_embedded_pic
-	/* Need to reinit PICBASE, since we might be called via exit()
-	   rather than via a return path which would restore old s0.  */
-#define PICBASE exit_PICBASE
-	PICBASE = .+8
-	bal	PICBASE
-	nop
-	move	s0,$31
-#endif
-#ifdef GCRT0
-	LA (t0, _mcleanup)
-	jal	t0
-	nop
-#endif
-	LA (t0, hardware_exit_hook)
-	beq	t0,zero,1f
-	nop
-	jal	t0
-	nop
-1:
-
-	# break instruction can cope with 0xfffff, but GAS limits the range:
-	break	1023
-	b	7b				# but loop back just in-case
-	nop
-	.end _exit
- 
-/* Assume the PICBASE set up above is no longer valid below here.  */
-#ifdef __mips_embedded_pic
-#undef PICBASE
-#endif
-
-/* EOF crt0.S */
diff --git a/libgloss/mips/crt0_cfe.S b/libgloss/mips/crt0_cfe.S
deleted file mode 100644
index 9e920e2d5..000000000
--- a/libgloss/mips/crt0_cfe.S
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * crt0_cfe.S -- Runtime startup for MIPS targets running CFE.
- *
- * Copyright 2003
- * Broadcom Corporation. All rights reserved.
- *
- * This software is furnished under license and may be used and copied only
- * in accordance with the following terms and conditions.  Subject to these
- * conditions, you may download, copy, install, use, modify and distribute
- * modified or unmodified copies of this software in source and/or binary
- * form. No title or ownership is transferred hereby.
- *
- * 1) Any source code used, modified or distributed must reproduce and
- *    retain this copyright notice and list of conditions as they appear in
- *    the source file.
- *
- * 2) No right is granted to use any trade name, trademark, or logo of
- *    Broadcom Corporation.  The "Broadcom Corporation" name may not be
- *    used to endorse or promote products derived from this software
- *    without the prior written permission of Broadcom Corporation.
- *
- * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED
- *    WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF
- *    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
- *    NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE
- *    FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE
- *    LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- *    CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- *    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- *    BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- *    WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- *    OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Derived from crt0_cygmon.S:
- *
- * Copyright (c) 1995, 1996, 1997, 2000 Red Hat, Inc.
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-/*
- * This file does minimal runtime startup for code running under
- * CFE firmware.
- *
- * It does minimal hardware initialization.  In particular
- * it sets Status:FR to match the requested floating point
- * mode.
- *
- * It is meant to be linked with the other files provided by libcfe.a,
- * and calls routines in those files.
- */
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-#ifdef __mips_embedded_pic
-# error -membedded-pic is not supported.
-#endif
-
-#include "regs.S"
-
-/*
- * Set up some room for a stack. We just grab a chunk of memory.
- */
-#define STARTUP_STACK_SIZE	(1 * 1024)		
-
-	.comm	_lstack, STARTUP_STACK_SIZE
-
-	.text
-	.align	4
-
-    /*
-     * Without the following nop, GDB thinks _start is a data variable.
-     * This is probably a bug in GDB in handling a symbol that is at the
-     * start of the .text section.
-     */
-	nop
-
-
-    /*
-     * On entry, the following values have been passed in registers
-     * by the firmware:
-     *
-     * a0: firmware handle
-     * a1: zero (unused)
-     * a2: firmware callback entrypoint
-     * a3: CFE entrypoint seal (unused)
-     *
-     * They must be preserved until the CFE entrypoint and handle
-     * are passed to __libcfe_init().
-     */
-
-	.globl	_start
-	.ent	_start
-_start:
-	.set	noreorder
-    /* Set the global data pointer, defined in the linker script.  */
-	la		gp, _gp
-
-#ifndef __mips_soft_float
-    /* If compiled for hard float, set the FPU mode based on the
-       compilation flags.  Note that this assumes that enough code
-       will run after the mtc0 to clear any hazards.  */
-	mfc0	t0, C0_SR
-	or	t0, t0, (SR_CU1 | SR_FR)
-#if (__mips_fpr == 32)
-	xor	t0, t0, SR_FR		/* If 32-bit FP mode, clear FR.  */
-#endif
-	mtc0	t0, C0_SR
-#endif
-	.end	_start
-
-    /*
-     * zero out the bss section.
-     */
-	.globl	_zerobss
-	.ent	_zerobss
-_zerobss:
-    /* These variables are defined in the linker script.  */
-	la		v0, _fbss
-	la		v1, _end
-
-3:
-	sw		zero, 0(v0)
-	bltu	v0, v1, 3b
-	addiu	v0, v0, 4		/* Delay slot.  */
-	.end	_zerobss
-
-    /*
-     * Setup a small stack so we can run some C code, and do
-     * the library initialization.  (32 bytes are saved for
-     * the argument registers' stack slots.)
-     */
-	.globl	_stackinit
-	.ent	_stackinit
-_stackinit:
-	la	t0, _lstack
-	addiu	sp, t0, (STARTUP_STACK_SIZE - 32)
-	jal	__libcfe_init
-	nop
-
-    /*
-     * Setup the stack pointer -- 
-     *    __libcfe_init() returns the value to be used as the top of
-     *    the program's stack.
-     *
-     *    We subtract 32 bytes for the 4 argument registers, in case
-     *    main() wants to write them back to the stack.  The caller
-     *    allocates stack space for parameters in the old MIPS ABIs.
-     *    We must do this even though we aren't passing arguments,
-     *    because main might be declared to have them.)
-     *
-     *    We subtract 32 more bytes for the argv/envp setup for the
-     *    call to main().
-     */
-	subu	v0, v0, 64
-	move	sp, v0
-
-	.end	_stackinit
-
-    /*
-     * initialize target specific stuff. Only execute these
-     * functions it they exist.
-     */
-	.globl	hardware_init_hook .text
-	.globl	software_init_hook .text
-	.type	_fini,@function
-	.type	_init,@function
-	.globl	atexit .text
-	.globl	exit .text
-	.globl	_crt0init
-	.ent	_crt0init
-_crt0init:
-	la		t9, hardware_init_hook	# init the hardware if needed
-	beq		t9, zero, 6f
-	nop
-	jal		t9
-	nop
-6:
-	la		t9, software_init_hook	# init the software if needed
-	beq		t9, zero, 7f
-	nop
-	jal		t9
-	nop
-7:
-	la		a0, _fini
-	jal		atexit
-	nop
-
-#ifdef GCRT0
-	.globl	_ftext
-	.globl	_extext
-	la		a0, _ftext
-	la		a1, _etext
-	jal		monstartup
-	nop
-#endif
-
-	jal	_init			# run global constructors
-	nop
-
-	addiu	a1,sp,32			# argv = sp + 32
-	addiu	a2,sp,40			# envp = sp + 40
-#if __mips64
-	sd	zero,(a1)			# argv[argc] = 0
-	sd	zero,(a2)			# envp[0] = 0
-#else
-	sw	zero,(a1)
-	sw	zero,(a2)
-#endif
-
-	jal	main			# call the program start function
-	move	a0,zero			# set argc to 0; delay slot.
-
-	# fall through to the "exit" routine
-	jal	exit			# call libc exit to run the G++
-					# destructors
-	move	a0, v0			# pass through the exit code
-	.end	_crt0init
-	
-/*
- * _exit -- Exit from the application.  This is provided in this file because
- *          program exit should shut down profiling (if GCRT0 is defined),
- *          and only this file is compiled with GCRT0 defined.
- */
-	.globl	_exit
-	.ent	_exit
-_exit:
-7:
-	move	s0, a0			/* Save in case we loop.  */
-
-#ifdef GCRT0
-	jal	_mcleanup
-	nop
-#endif
-
-	la	t0, hardware_exit_hook
-	beq	t0,zero,1f
-	nop
-	jal	t0
-	nop
-
-1:
-	/* Call into the library to do the heavy lifting.  */
-        jal	__libcfe_exit
-	move	a0, s0			/* Delay slot.  */
-
-	b	7b			/* Loop back just in case.  */
-	nop
-	.end	_exit
-
-/* EOF crt0_cfe.S */
diff --git a/libgloss/mips/crt0_cygmon.S b/libgloss/mips/crt0_cygmon.S
deleted file mode 100644
index ae0a9e373..000000000
--- a/libgloss/mips/crt0_cygmon.S
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * crt0_cygmon.S -- Minimal startup file for MIPS targets running Cygmon.
- *
- * Copyright (c) 1995, 1996, 1997, 2000 Red Hat, Inc.
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-/*
- * This file contains the minimal startup code necessary.
- * This will not do any hardware initialization.  It is assumed that we are talking to Cygmon
- * and therefore the hardware will be initialized properly.
- */
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#include "regs.S"
-
-/*
- * Set up some room for a stack. We just grab a chunk of memory.
- */
-#define STACK_SIZE  0x4000
-#define GLOBAL_SIZE 0x2000
-
-#define STARTUP_STACK_SIZE	0x0100
-
-	.comm	__memsize, 12
-	.comm	__lstack, STARTUP_STACK_SIZE
-	.comm   __stackbase,4
-
-	.text
-	.align	4
-    /*
-     * Without the following nop, GDB thinks _start is a data variable.
-     * This is probably a bug in GDB in handling a symbol that is at the
-     * start of the .text section.
-     */
-	nop
-
-	.globl	_start
-	.ent	_start
-_start:
-	.set	noreorder
-	la		gp, _gp					# set the global data pointer, defined in the linker script
-	.end	_start
-
-    /*
-     * zero out the bss section.
-     */
-	.globl	__memsize
-	.globl	get_mem_info .text
-	.globl	zerobss
-	.ent	zerobss
-zerobss:
-	la		v0, _fbss				# These variables are defined in the linker script
-	la		v1, _end
-
-3:
-	sw		zero, 0(v0)
-	bltu	v0, v1, 3b
-	addiu	v0, v0, 4				# executed in delay slot
-
-    /*
-     * Setup a small stack so we can run some C code,
-     * and get the usable memory size.
-     */
-	la		t0, __lstack
-	addiu	sp, t0, STARTUP_STACK_SIZE
-	la		a0, __memsize
-	jal		get_mem_info
-	nop
-
-	/*
-     * Setup the stack pointer -- 
-     *    get_mem_info returns the top of memory, so just use that In
-     *    addition, we must subtract 24 bytes for the 3 8 byte
-     *    arguments to main, in case main wants to write them back to
-     *    the stack.  The caller is supposed to allocate stack space
-     *    for parameters in registers in the old MIPS ABIs.  We must
-     *    do this even though we aren't passing arguments, because
-     *    main might be declared to have them.
-	 *    Some ports need a larger alignment for the stack, so we
-	 *    subtract 32, which satisifes the stack for the arguments and
-	 *    keeps the stack pointer better aligned.
-     */
-	subu	v0, v0, 32
-	move	sp, v0
-
-	sw		sp, __stackbase			# keep this for future ref
-	.end	zerobss
-
-    /*
-     * initialize target specific stuff. Only execute these
-     * functions it they exist.
-     */
-	.globl	hardware_init_hook .text
-	.globl	software_init_hook .text
-	.globl	__do_global_dtors .text
-	.globl	atexit .text
-	.globl	exit .text
-	.globl	init
-	.ent	init
-init:
-	la		t9, hardware_init_hook	# init the hardware if needed
-	beq		t9, zero, 6f
-	nop
-	jal		t9
-	nop
-6:
-	la		t9, software_init_hook	# init the software if needed
-	beq		t9, zero, 7f
-	nop
-	jal		t9
-	nop
-7:
-	la		a0, __do_global_dtors
-	jal		atexit
-	nop
-
-#ifdef GCRT0
-	.globl	_ftext
-	.globl	_extext
-	la		a0, _ftext
-	la		a1, _etext
-	jal		monstartup
-	nop
-#endif
-
-	move	a0,zero					# set argc to 0
-	jal		main					# call the program start function
-	nop
-
-	# fall through to the "exit" routine
-	jal		exit					# call libc exit to run the G++
-									# destructors
-	move	a0, v0					# pass through the exit code
-	.end	init
-	
-/*
- * _exit -- Exit from the application. Normally we cause a user trap
- *          to return to the ROM monitor for another run. NOTE: This is
- *          the only other routine we provide in the crt0.o object, since
- *          it may be tied to the "_start" routine. It also allows
- *          executables that contain a complete world to be linked with
- *          just the crt0.o object.
- */
-	.globl	_exit
-	.ent	_exit
-_exit:
-7:
-#ifdef GCRT0
-	jal		_mcleanup
-	nop
-#endif
-	# Cygmon expects a break 5
-	break	5
-	nop
-	b		7b						# loop back just in-case
-	nop
-	.end	_exit
-
-/* EOF crt0.S */
diff --git a/libgloss/mips/cygmon.c b/libgloss/mips/cygmon.c
deleted file mode 100644
index 506e853b6..000000000
--- a/libgloss/mips/cygmon.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/* cygmon.c -- Glue code for linking apps to run on top of Cygmon.
- *
- * Copyright (c) 1998, 1999, 2000 Red Hat, Inc.
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#include "syscall.h"
-
-int
-write ( int file,
-        char *buf,
-        int nbytes)
-{
-  return sysCall(SYS_write, file, (unsigned long)buf, nbytes);
-}
-
-int
-read (int file,
-      char *buf,
-      int nbytes)
-{
-  return sysCall(SYS_read, file, (unsigned long)buf, nbytes);
-}
-
-int
-outbyte (unsigned char c)
-{
-  return sysCall(SYS_write, 0, (unsigned long)&c, 1);
-}
-
-unsigned char
-inbyte (void)
-{
-  char c;
-  sysCall(SYS_read, 0, (unsigned long)&c, 1);
-  return c;
-}
-
-
-/* Structure filled in by get_mem_info.  Only the size field is
-   actually used (by sbrk), so the others aren't even filled in.  */
-struct s_mem
-{
-  unsigned int size;
-  unsigned int icsize;
-  unsigned int dcsize;
-};
-
-// Perform a system call.
-// Unused parameters should be set to 0.
-int sysCall(unsigned long func, unsigned long p1, unsigned long p2, unsigned long p3)
-{
-  int ret = 0;
-  asm volatile ( "		\n\
-          move $4, %1		\n\
-          move $5, %2		\n\
-          move $6, %3		\n\
-          move $7, %4		\n\
-          syscall 		\n\
-          nop			\n\
-          move %0, $2" : "=r"(ret) : "r"(func), "r"(p1), "r"(p2), "r"(p3));
-  return ret;
-}
-
-// These need to be kept in sync with the definitions in Cygmon.
-#define SYS_meminfo     1001
-
-void *
-get_mem_info (mem)
-     struct s_mem *mem;
-{
-  unsigned long totmem = 0, topmem = 0;
-  int numbanks;
-
-  numbanks = sysCall(SYS_meminfo, (unsigned long)&totmem, (unsigned long)&topmem, 0);
-  mem->size = totmem;
-  return (void*)topmem;
-}
diff --git a/libgloss/mips/ddb-kseg0.ld b/libgloss/mips/ddb-kseg0.ld
deleted file mode 100644
index db3759ea6..000000000
--- a/libgloss/mips/ddb-kseg0.ld
+++ /dev/null
@@ -1,166 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lpmon -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0x80100000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rdata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-   end = .;
-   _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/ddb.ld b/libgloss/mips/ddb.ld
deleted file mode 100644
index 028078353..000000000
--- a/libgloss/mips/ddb.ld
+++ /dev/null
@@ -1,166 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lpmon -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0xA0100000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rdata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-   end = .;
-   _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/dtor.C b/libgloss/mips/dtor.C
deleted file mode 100644
index 2cfcb4665..000000000
--- a/libgloss/mips/dtor.C
+++ /dev/null
@@ -1,25 +0,0 @@
-#include <stdio.h>
-
-extern "C" void print (char *, ...);
-
-class foo
-{
-public:
-  foo () { print ("ctor\n"); }
-  ~foo () { print ("dtor\n"); }
-};
-
-foo x;
-
-main ()
-{
-  outbyte ('&');
-  outbyte ('@');
-  outbyte ('$');
-  outbyte ('%');
-  print ("FooBar\r\n");
-
-  /* whew, we made it */
-  print ("\r\nDone...\r\n");
-  fflush(stdout);
-}
diff --git a/libgloss/mips/dve.ld b/libgloss/mips/dve.ld
deleted file mode 100644
index 073d1e9ca..000000000
--- a/libgloss/mips/dve.ld
+++ /dev/null
@@ -1,167 +0,0 @@
-/* Linker script for Densan DVE-R3900/20A board */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:3000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -ldve -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0xA0040000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-      CONSTRUCTORS
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-   end = .;
-   _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/dvemon.c b/libgloss/mips/dvemon.c
deleted file mode 100644
index 16b49da06..000000000
--- a/libgloss/mips/dvemon.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/* dve.c -- I/O code for the Densan DVE-R3900 board.
- *
- * Copyright (c) 1998, 1999 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-/* Flag indicating that we are being debugged by GDB.  If set,
-   preceded each character output to the console with a ^O,
-   so that GDB will print it instead of discarding it.  */
-
-int output_debug = 1;
-
-/* Monitor "ci" function (console input) */
-
-typedef int (*cifunc)(int waitflag);
-#ifdef __mips64
-static cifunc ci = (cifunc) 0xffffffffbfc00010L;
-#else
-static cifunc ci = (cifunc) 0xbfc00010;
-#endif
-
-#define WAIT    1
-#define NOWAIT  0 
-#define NOCHAR  (-1)
-
-/* Monitor "co" function (console output) */
-
-typedef void (*cofunc)(int c);
-#ifdef __mips64
-static cofunc co = (cofunc) 0xffffffffbfc00018L;
-#else
-static cofunc co = (cofunc) 0xbfc00018;
-#endif
-
-/*  outbyte -- shove a byte out the serial port; used by write.c.  */
-
-int
-outbyte(byte)
-     unsigned char byte;
-{
-  /* Output a ^O prefix so that GDB won't discard the output.  */
-  if (output_debug)
-    co (0x0f);
-
-  co (byte);
-  return byte;
-}
-
-/* inbyte -- get a byte from the serial port; used by read.c.  */
-
-unsigned char
-inbyte()
-{
-  return (unsigned char) ci (WAIT);
-}
-
-
-/* Structure filled in by get_mem_info.  Only the size field is
-   actually used (by sbrk), so the others aren't even filled in.  */
-
-struct s_mem
-{
-  unsigned int size;
-  unsigned int icsize;
-  unsigned int dcsize;
-};
-
-
-void
-get_mem_info (mem)
-     struct s_mem *mem;
-{
-  mem->size = 0x1000000;	/* DVE-R3900 board has 16 MB of RAM */
-}
diff --git a/libgloss/mips/entry.S b/libgloss/mips/entry.S
deleted file mode 100644
index 3630c552f..000000000
--- a/libgloss/mips/entry.S
+++ /dev/null
@@ -1,281 +0,0 @@
-/* entry.S - exception handler for emulating MIPS16 'entry' and 'exit'
-   pseudo-instructions.  These instructions are generated by the compiler
-   when the -mentry switch is used.  The instructions are not implemented
-   in the MIPS16 CPU; hence the exception handler that emulates them.
-
-   This module contains the following public functions:
-
-   * void __install_entry_handler(void);
-
-     This function installs the entry/exit exception handler.  It should
-     be called before executing any MIPS16 functions that were compiled with
-     -mentry, typically before main() is called.
-
-   * void __remove_entry_handler(void);
-
-     This function removes the entry/exit exception handler.  It should
-     be called when the program is exiting, or when it is known that no
-     more MIPS16 functions compiled with -mentry will be called.
-*/
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#include "regs.S"
-
-#define CAUSE_EXCMASK	0x3c	/* mask for ExcCode in Cause Register */
-#define EXC_RI  	0x28	/* 101000 == 10 << 2 */
-
-/* Set DEBUG to 1 to enable recording of the last 16 interrupt causes.  */
-
-#define DEBUG 0
-
-#if DEBUG
-
-	.sdata
-int_count:
-	.space	4			/* interrupt count modulo 16 */
-int_cause:
-	.space	4*16			/* last 16 interrupt causes */
-#endif
-
-	.text
-
-	.set	noreorder		/* Do NOT reorder instructions */
-
-
-/* __entry_exit_handler - the reserved instruction exception handler
-   that emulates the entry and exit instruction.  */
-
-__entry_exit_handler:
-	.set	noat			/* Do NOT use at register */
-#if DEBUG
-/* Must avoid using 'la' pseudo-op because it uses gp register, which
-   may not have a good value in an exception handler. */
-  
-#	la	k0, int_count		/* intcount = (intcount + 1) & 0xf */
-	lui	k0 ,%hi(int_count)
-	addiu	k0, k0 ,%lo(int_count)
-	lw	k1, (k0)
-	addiu	k1, k1, 1
-	andi	k1, k1, 0x0f
-	sw	k1, (k0)
-#	la	k0, int_cause		/* k1 = &int_cause[intcount] */
-	lui	k0, %hi(int_cause)
-	addiu	k0, k0, %lo(int_cause)
-	sll	k1, k1, 2
-	add	k1, k1, k0
-#endif	
-	mfc0	k0, C0_CAUSE		/* Fetch cause */
-#if DEBUG
-	sw	k0, -4(k1)		/* Save exception cause in buffer */
-#endif
-	mfc0	k1, C0_EPC		/* Check for Reserved Inst. without */
-	and	k0, CAUSE_EXCMASK	/*   destroying any register */
-	subu	k0, EXC_RI
-	bne	k0, zero, check_others	/* Sorry, go do something else */
-
-	and	k0, k1, 1		/* Check for TR mode (pc.0 = 1) */
-	beq	k0, zero, ri_in_32	/* Sorry, RI in 32-bit mode */
-	xor	k1, 1			
-
-/* Since we now are going to emulate or die, we can use all the T-registers */
-/* that MIPS16 does not use (at, t0-t8), and we don't have to save them. */
-
-	.set	at			/* Now it's ok to use at again */
-
-#if 0
-	j	leave
-	rfe
-#endif
-
-	lhu	t0, 0(k1)		/* Fetch the offending instruction */
-	xor	t8, k1, 1		/* Prepare t8 for exit */
-	and	t1, t0, 0xf81f		/* Check for entry/exit opcode */
-	bne	t1, 0xe809, other_ri
-
-deareg:	and	t1, t0, 0x0700		/* Isolate the three a-bits */
-	srl	t1, 6			/* Adjust them so x4 is applied */
-	slt     t2, t1, 17		/* See if this is the exit instruction */
-	beqz    t2, doexit
-	la	t2, savea
-	subu	t2, t1
-	jr	t2			/* Jump into the instruction table */
-	rfe				/* We run the rest in user-mode */
-
-					/* This is the entry instruction! */
-	sw	a3, 12(sp)		/* 4: a0-a3 saved */
-	sw	a2,  8(sp)		/* 3: a0-a2 saved */
-	sw	a1,  4(sp)		/* 2: a0-a1 saved */
-	sw	a0,  0(sp)		/* 1: a0    saved */
-savea:					/* 0: No arg regs saved */
-
-dera:	and	t1, t0, 0x0020		/* Isolate the save-ra bit */
-	move	t7, sp			/* Temporary SP */
-	beq	t1, zero, desreg
-	subu	sp, 32			/* Default SP adjustment */
-	sw	ra, -4(t7)
-	subu	t7, 4
-
-desreg:	and	t1, t0, 0x00c0		/* Isolate the two s-bits */
-	beq	t1, zero, leave
-	subu	t1, 0x0040
-	beq	t1, zero, leave		/* Only one to save... */
-	sw	s0, -4(t7)		/* Do the first one */
-	sw	s1, -8(t7)		/* Do the last one */
-
-leave:	jr	t8			/* Exit to unmodified EPC */
-	nop				/* Urgh - the only nop!! */
-
-doexf0: mtc1	v0,$f0			/* Copy float value */
-	b       doex2
-
-doexf1:	mtc1	v1,$f0			/* Copy double value */
-	mtc1    v0,$f1
-	b       doex2
-
-doexit:	slt	t2, t1, 21
-	beq	t2, zero, doexf0
-	slt	t2, t1, 25
-	beq	t2, zero, doexf1
-
-doex2:	and	t1, t0, 0x0020		/* Isolate ra bit */
-	beq     t1, zero, dxsreg	/* t1 holds ra-bit */
-	addu	t7, sp, 32		/* Temporary SP */
-	lw	ra, -4(t7)
-	subu	t7, 4
-
-dxsreg:	and	t1, t0, 0x00c0		/* Isolate the two s-bits */
-	beq	t1, zero, leavex
-	subu	t1, 0x0040
-	beq	t1, zero, leavex	/* Only one to save... */
-	lw	s0, -4(t7)		/* Do the first one */
-	lw	s1, -8(t7)		/* Do the last one */
-
-leavex:	jr	ra			/* Exit to ra */
-	addu	sp, 32			/* Clean up stack pointer */
-
-/* Come here for exceptions we can't handle.  */
-
-ri_in_32:
-other_ri:
-check_others:				/* call the previous handler */
-	la	k0,__previous
-	jr	k0
-	nop
-
-__exception_code:
-	.set noreorder
-	la	k0, __entry_exit_handler
-#	lui	k0, %hi(exception)
-#	addiu	k0, k0, %lo(exception)
-	jr	k0
-	nop
-	.set reorder
-__exception_code_end:
-
-	.data
-__previous:
-	.space	(__exception_code_end - __exception_code)
-	.text
-
-
-/* void __install_entry_handler(void)
-
-   Install our entry/exit reserved instruction exception handler.
-*/
-	.ent	__install_entry_handler
-	.globl	__install_entry_handler
-__install_entry_handler:
-        .set noreorder
-	mfc0	a0,C0_SR
-	nop
-	li	a1,SR_BEV
-	and	a1,a1,a0
-	beq	a1,$0,baseaddr
-	lui	a0,0x8000	/* delay slot */
-	lui	a0,0xbfc0
-	addiu	a0,a0,0x0100
-baseaddr:
-	addiu	a0,a0,0x080	/* a0 = base vector table address */
-	li	a1,(__exception_code_end - __exception_code)
-	la	a2,__exception_code
-	la	a3,__previous
-/* there must be a better way of doing this???? */
-copyloop:
-	lw	v0,0(a0)
-	sw	v0,0(a3)
-	lw	v0,0(a2)
-	sw	v0,0(a0)
-	addiu	a0,a0,4
-	addiu	a2,a2,4
-	addiu	a3,a3,4
-	subu	a1,a1,4
-	bne	a1,$0,copyloop
-	nop
-	j	ra
-	nop
-        .set reorder
-	.end	__install_entry_handler
-
-
-/* void __remove_entry_handler(void);
-
-   Remove our entry/exit reserved instruction exception handler.
-*/
-
-	.ent	__remove_entry_handler
-	.globl	__remove_entry_handler
-__remove_entry_handler:
-        .set noreorder
-
-	mfc0	a0,C0_SR
-	nop
-	li	a1,SR_BEV
-	and	a1,a1,a0
-	beq	a1,$0,res_baseaddr
-	lui	a0,0x8000	/* delay slot */
-	lui	a0,0xbfc0
-	addiu	a0,a0,0x0200
-res_baseaddr:
-	addiu	a0,a0,0x0180	/* a0 = base vector table address */
-	li	a1,(__exception_code_end - __exception_code)
-	la	a3,__previous
-
-/* there must be a better way of doing this???? */
-res_copyloop:
-	lw	v0,0(a3)
-	sw	v0,0(a0)
-	addiu	a0,a0,4
-	addiu	a3,a3,4
-	subu	a1,a1,4
-	bne	a1,$0,res_copyloop
-	nop
-	j	ra
-	nop
-        .set reorder
-	.end	__remove_entry_handler
-
-
-/* software_init_hook - install entry/exit handler and arrange to have it
-   removed at exit.  This function is called by crt0.S.  */
-
-	.text
-	.globl	software_init_hook
-	.ent	software_init_hook
-software_init_hook:
-	.set	noreorder
-	subu	sp, sp, 8			/* allocate stack space */
-	sw	ra, 4(sp)			/* save return address */
-	jal	__install_entry_handler		/* install entry/exit handler */
-	nop
-	lui	a0, %hi(__remove_entry_handler)	/* arrange for exit to */
-	jal	atexit				/*  de-install handler */
-	addiu	a0, a0, %lo(__remove_entry_handler)	/* delay slot */
-	lw	ra, 4(sp)			/* get return address */
-	j	ra				/* return */
-	addu	sp, sp, 8			/* deallocate stack */
-	.set	reorder
-	.end	software_init_hook
diff --git a/libgloss/mips/idt.ld b/libgloss/mips/idt.ld
deleted file mode 100644
index 05b39b78d..000000000
--- a/libgloss/mips/idt.ld
+++ /dev/null
@@ -1,184 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. i.e. the NEC VR4300 (IDT) first free address is actually
-   0xa001af20. */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lidt -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0xA0020000;
-  .text : {
-    _ftext = . ;
-    PROVIDE (eprol = .);
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-  }
-  .init : {
-    KEEP (*(.init))
-  }
-  .fini : {
-    KEEP (*(.fini))
-  }
-  .rel.sdata : {
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-  }
-  PROVIDE (etext = .);
-  _etext  =  .;
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   PROVIDE (edata  =  .);
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-  PROVIDE (end = .);
-  _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-
-  /* Special sections generated by gcc */
-  /* Newer GNU linkers strip by default */
-  .mdebug.abi32            0 : { KEEP(*(.mdebug.abi32)) }
-  .mdebug.abiN32           0 : { KEEP(*(.mdebug.abiN32)) }
-  .mdebug.abi64            0 : { KEEP(*(.mdebug.abi64)) }
-  .mdebug.abiO64           0 : { KEEP(*(.mdebug.abiO64)) }
-  .mdebug.eabi32           0 : { KEEP(*(.mdebug.eabi32)) }
-  .mdebug.eabi64           0 : { KEEP(*(.mdebug.eabi64)) }
-  .gcc_compiled_long32     0 : { KEEP(*(.gcc_compiled_long32)) }
-  .gcc_compiled_long64     0 : { KEEP(*(.gcc_compiled_long64)) }
-}
diff --git a/libgloss/mips/idt32.ld b/libgloss/mips/idt32.ld
deleted file mode 100644
index a127778f2..000000000
--- a/libgloss/mips/idt32.ld
+++ /dev/null
@@ -1,186 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace.  This linker script links isa32 programs for use with the
-   simulator.  */
-
-ENTRY(_start)
-OUTPUT_ARCH("mips:isa32")
-OUTPUT_FORMAT("elf32-littlemips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lidt -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-STARTUP(crt0.o)
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist.
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{
-  . = 0x80020000;
-  .text : {
-     _ftext = . ;
-    PROVIDE (eprol  =  .);
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-  }
-  .init : {
-    KEEP (*(.init))
-  }
-  .fini : {
-    KEEP (*(.fini))
-  }
-  .rel.sdata : {
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-  }
-  PROVIDE (etext  =  .);
-  _etext  =  .;
-
-
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-  PROVIDE (edata  =  .);
-  _edata  =  .;
-  _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-   PROVIDE (end = .);
-   _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-
-  /* Special sections generated by gcc */
-  /* Newer GNU linkers strip by default */
-  .mdebug.abi32            0 : { KEEP(*(.mdebug.abi32)) }
-  .mdebug.abiN32           0 : { KEEP(*(.mdebug.abiN32)) }
-  .mdebug.abi64            0 : { KEEP(*(.mdebug.abi64)) }
-  .mdebug.abiO64           0 : { KEEP(*(.mdebug.abiO64)) }
-  .mdebug.eabi32           0 : { KEEP(*(.mdebug.eabi32)) }
-  .mdebug.eabi64           0 : { KEEP(*(.mdebug.eabi64)) }
-  .gcc_compiled_long32     0 : { KEEP(*(.gcc_compiled_long32)) }
-  .gcc_compiled_long64     0 : { KEEP(*(.gcc_compiled_long64)) }
-}
diff --git a/libgloss/mips/idt64.ld b/libgloss/mips/idt64.ld
deleted file mode 100644
index 10e9b1bcc..000000000
--- a/libgloss/mips/idt64.ld
+++ /dev/null
@@ -1,185 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace.  This linker script links isa32 programs for use with the
-   simulator.  */
-
-ENTRY(_start)
-OUTPUT_ARCH("mips:isa64")
-OUTPUT_FORMAT("elf32-littlemips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lidt -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-STARTUP(crt0.o)
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist.
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{
-  . = 0x80020000;
-  .text : {
-     _ftext = . ;
-    PROVIDE (eprol  =  .);
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-  }
-  .init : {
-    KEEP (*(.init))
-  }
-  .fini : {
-    KEEP (*(.fini))
-  }
-  .rel.sdata : {
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-  }
-  PROVIDE (etext  =  .);
-  _etext  =  .;
-
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-  PROVIDE (edata  =  .);
-  _edata  =  .;
-  _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-  PROVIDE (end = .);
-  _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-
-  /* Special sections generated by gcc */
-  /* Newer GNU linkers strip by default */
-  .mdebug.abi32            0 : { KEEP(*(.mdebug.abi32)) }
-  .mdebug.abiN32           0 : { KEEP(*(.mdebug.abiN32)) }
-  .mdebug.abi64            0 : { KEEP(*(.mdebug.abi64)) }
-  .mdebug.abiO64           0 : { KEEP(*(.mdebug.abiO64)) }
-  .mdebug.eabi32           0 : { KEEP(*(.mdebug.eabi32)) }
-  .mdebug.eabi64           0 : { KEEP(*(.mdebug.eabi64)) }
-  .gcc_compiled_long32     0 : { KEEP(*(.gcc_compiled_long32)) }
-  .gcc_compiled_long64     0 : { KEEP(*(.gcc_compiled_long64)) }
-}
diff --git a/libgloss/mips/idtecoff.ld b/libgloss/mips/idtecoff.ld
deleted file mode 100644
index 2788cc824..000000000
--- a/libgloss/mips/idtecoff.ld
+++ /dev/null
@@ -1,99 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. i.e. the NEC VR4300 (IDT) first free address is actually
-   0xa001af20. */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:4000")
-OUTPUT_FORMAT("ecoff-bigmips", "ecoff-bigmips", "ecoff-littlemips")
-GROUP(-lc -lidt -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0xA0020000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  . = .;
-  .rdata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-    CONSTRUCTORS
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-   end = .;
-   _end = .;
-}
diff --git a/libgloss/mips/idtmon.S b/libgloss/mips/idtmon.S
deleted file mode 100644
index bb1538812..000000000
--- a/libgloss/mips/idtmon.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * idtmon.S -- lo-level entry points into IDT monitor.
- *
- * Copyright (c) 1996 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#include "regs.S"
-
-	.text
-	.align	2
-
-/* Provide named functions for entry into the IDT monitor: */
-#define INDIRECT(name,index)			\
-	.globl	name;				\
-	.ent	name;				\
-name:	la	$2,+(0xbfc00000+((index)*8));	\
-	j	$2;				\
-	.end name
-
-/* The following magic numbers are for the slots into the IDT monitor: */
-INDIRECT(open,6)
-INDIRECT(read,7)
-INDIRECT(write,8)
-INDIRECT(close,10)
-INDIRECT(inbyte,11)
-INDIRECT(outbyte,12)
-INDIRECT(mon_printf,16)
-INDIRECT(_flush_cache,28)
-INDIRECT(get_mem_info,55)	/* expects pointer to three word vector */
-
-/* EOF idtmon.S */
diff --git a/libgloss/mips/jmr3904-io.c b/libgloss/mips/jmr3904-io.c
deleted file mode 100644
index 8d4300739..000000000
--- a/libgloss/mips/jmr3904-io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-
-
-#define READ_UINT8( _register_, _value_ ) \
-        ((_value_) = *((volatile unsigned char *)(_register_)))
-
-#define WRITE_UINT8( _register_, _value_ ) \
-        (*((volatile unsigned char *)(_register_)) = (_value_))
-
- /* - Board specific addresses for serial chip */
-#define DIAG_BASE       0xfffff300
-#define DIAG_SLCR       (DIAG_BASE+0x00)
-#define DIAG_SLSR       (DIAG_BASE+0x04)
-#define DIAG_SLDICR     (DIAG_BASE+0x08)
-#define DIAG_SLDISR     (DIAG_BASE+0x0C)
-#define DIAG_SFCR       (DIAG_BASE+0x10)
-#define DIAG_SBRG       (DIAG_BASE+0x14)
-#define DIAG_TFIFO      (DIAG_BASE+0x20)
-#define DIAG_RFIFO      (DIAG_BASE+0x30)
-
-#define BRG_T0          0x0000
-#define BRG_T2          0x0100
-#define BRG_T4          0x0200
-#define BRG_T5          0x0300
-
-
-#define READ_UINT16( _register_, _value_ ) \
-     ((_value_) = *((volatile unsigned short *)(_register_)))
-
-#define WRITE_UINT16( _register_, _value_ ) \
-     (*((volatile unsigned short *)(_register_)) = (_value_))
-
-unsigned char
-inbyte (void)
-{
-  unsigned char c;
-  unsigned short disr;
-  
-  for (;;)
-    {
-      READ_UINT16 (DIAG_SLDISR, disr);
-      if (disr & 0x0001)
-	break;
-    }
-  disr = disr & ~0x0001;
-  READ_UINT8 (DIAG_RFIFO, c);
-  WRITE_UINT16 (DIAG_SLDISR, disr);
-  return c;
-}
-
-void
-outbyte (unsigned char c)
-{
-  unsigned short disr;
-  
-  for (;;)
-    {
-      READ_UINT16 (DIAG_SLDISR, disr);
-      if (disr & 0x0002)
-	break;
-    }
-  disr = disr & ~0x0002;
-  WRITE_UINT8 (DIAG_TFIFO, c);
-  WRITE_UINT16 (DIAG_SLDISR, disr);
-}
-
-/* Stuff required to setup IO on this board */
-void board_serial_init (void)
-{
-  WRITE_UINT16 (DIAG_SLCR, 0x0020);
-  WRITE_UINT16 (DIAG_SLDICR, 0x0000);
-  WRITE_UINT16 (DIAG_SFCR, 0x0000);
-  WRITE_UINT16 (DIAG_SBRG, BRG_T2 | 5);
-}
-
-/* If you want this to be initialized as part of the stuff which gets called
-   by crt0, it should be named 'hardware_init_hook'.
-   Local implementations may want to move or add to this function OR
-   do the initializations after main() is entered.
-*/
-void hardware_init_hook(void)
-{
-  board_serial_init() ;
-}
-     
-/* Structure filled in by get_mem_info.  Only the size field is
-   actually used (by sbrk), so the others aren't even filled in.  */
-
-struct s_mem
-{
-  unsigned int size;
-  unsigned int icsize;
-  unsigned int dcsize;
-};
-
-/* mem_size is provided in the linker script so that we don't have to
-   define it here. */
-extern char _mem_size[];
-
-void
-get_mem_info (mem)
-     struct s_mem *mem;
-{
-  mem->size = (unsigned int)_mem_size;
-}
diff --git a/libgloss/mips/jmr3904app-java.ld b/libgloss/mips/jmr3904app-java.ld
deleted file mode 100644
index 98ce5357c..000000000
--- a/libgloss/mips/jmr3904app-java.ld
+++ /dev/null
@@ -1,135 +0,0 @@
-/* Linker script forJMR 3904 board using Java + qthreads */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:3000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -ljmr3904 -lgcc -lgcjcoop)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-PROVIDE (_mem_size = 0x100000); /* JMR3904 comes as standard with 512k of RAM */
-
-/* Set the size of the stack for Java with qthreads.  */
-PROVIDE (_Jv_QthreadsStackSize = 0x10000);
-
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0x80008000;
-      /* This is NOT the address which fits with the monitor from jmr. */
-      /* It fits the Cygmon ROMS */
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-    CONSTRUCTORS
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . += 0x2000 ;  /* 8k bytes of stack. */
-    __stack = ALIGN(64) ;
-    . = __stack ;
-  }
-
-   end = .;
-   _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/jmr3904app.ld b/libgloss/mips/jmr3904app.ld
deleted file mode 100644
index 3056a36bf..000000000
--- a/libgloss/mips/jmr3904app.ld
+++ /dev/null
@@ -1,168 +0,0 @@
-/* Linker script forJMR 3904 board */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:3000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -ljmr3904 -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-PROVIDE (_mem_size = 0x100000); /* JMR3904 comes as standard with 512k of RAM */
-
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0x80008000;
-      /* This is NOT the address which fits with the monitor from jmr. */
-      /* It fits the Cygmon ROMS */
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-    . += 0x2000 ;  /* 8k bytes of stack. */
-    __stack = ALIGN(64) ;
-    . = __stack ;
-  }
-
-   end = .;
-   _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/jmr3904dram-java.ld b/libgloss/mips/jmr3904dram-java.ld
deleted file mode 100644
index 71e84032e..000000000
--- a/libgloss/mips/jmr3904dram-java.ld
+++ /dev/null
@@ -1,138 +0,0 @@
-/* Linker script forJMR 3904 board using Java + qthreads */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:3000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -ljmr3904 -lgcc -lgcjcoop)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-PROVIDE (_mem_size = 0x100000); /* JMR3904 comes as standard with 512k of RAM */
-				/* but this is 1 Mb */
-
-/* Set the size of the stack for Java with qthreads.  */
-PROVIDE (_Jv_QthreadsStackSize = 0x10000);
-
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  /* Load everything into DRAM, except for the stack.  Put stack in SRAM */
-  . = 0x88000000;
-      /* This is NOT the address which fits with the monitor from jmr. */
-      /* It fits the Cygmon ROMS */
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  . = .;
-  .rdata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-    CONSTRUCTORS
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-   end = .;
-   _end = .;
-
-   /* Put stack in SRAM (8 Kb); this size is the same as the stack from
-      the original script (when everything was in SRAM). */
-   __stack = 0x8000A000;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/jmr3904dram.ld b/libgloss/mips/jmr3904dram.ld
deleted file mode 100644
index a2cb1eae5..000000000
--- a/libgloss/mips/jmr3904dram.ld
+++ /dev/null
@@ -1,135 +0,0 @@
-/* Linker script forJMR 3904 board */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:3000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -ljmr3904 -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-PROVIDE (_mem_size = 0x100000); /* JMR3904 comes as standard with 512k of RAM */
-				/* but this is 1 Mb */
-
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  /* Load everything into DRAM, except for the stack.  Put stack in SRAM */
-  . = 0x88000000;
-      /* This is NOT the address which fits with the monitor from jmr. */
-      /* It fits the Cygmon ROMS */
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  . = .;
-  .rdata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-    CONSTRUCTORS
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-   end = .;
-   _end = .;
-
-   /* Put stack in SRAM (8 Kb); this size is the same as the stack from
-      the original script (when everything was in SRAM). */
-   __stack = 0x8000A000;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-}
diff --git a/libgloss/mips/lsi.ld b/libgloss/mips/lsi.ld
deleted file mode 100644
index 839382527..000000000
--- a/libgloss/mips/lsi.ld
+++ /dev/null
@@ -1,132 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:4000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -llsi -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0xA0020000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-    CONSTRUCTORS
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-   end = .;
-   _end = .;
-}
diff --git a/libgloss/mips/lsipmon.S b/libgloss/mips/lsipmon.S
deleted file mode 100644
index f9083d6c5..000000000
--- a/libgloss/mips/lsipmon.S
+++ /dev/null
@@ -1,2 +0,0 @@
-#define LSI 1
-#include "pmon.S"
diff --git a/libgloss/mips/nullmon.c b/libgloss/mips/nullmon.c
deleted file mode 100644
index 0b519bf7b..000000000
--- a/libgloss/mips/nullmon.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/* nullmon.c - Stub or monitor services.
- *
- * Copyright (c) 1998 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-/* This is a ROMSTUB
-    Various libraries in libgloss may reference board specific services.
-   These are often performed by system calls and by rom specific
-   interfaces such as dvemon.c This file defines the null interface in
-   which the rom monitor either does not exist or is not used.
-   Linking with this file supports applications which only exercise
-   the processor, specifically, the GDB test suite.
-   By linking this object in rather than a monitor specific support
-   we can insure that the testsuite will run without references or
-   linkages to nonexistent monitor services.
-   Similarly, every service provided by this file muse be provided by all
-   monitor speciifc interfaces.
-   PLEASE DO NOT MAKE THIS FILE SPECIFIC TO ANY MONITOR
- */   
-
-/* This form is giving linker relocation errors */
-#if ! defined(BOARD_MEM_SIZE)
-#define BOARD_MEM_SIZE 0x100000 /* About a megabyte */
-#endif
-extern char _ftext[]; /* Defined in nullmon.ld */
-extern char _end[];   /* Defined in nullmon.ld */
-
-#if defined(FIXME_WARNINGS)
-#warning("FIXME: struct s_mem belongs in a header file")
-#endif
-struct s_mem
-{ unsigned int size;
-  unsigned int icsize;
-  unsigned int dcsize;
-};
-
-void
-get_mem_info (mem)
-     struct s_mem *mem;
-{
-  mem->size = BOARD_MEM_SIZE - (_end - _ftext);
-}
-
-/*  SYSTEM INTERFACE
-  Since we are defining a NULL operating environment here, I am
-  entering the stub definitions for the GNUpro libraries, System Calls.
-  I would rather not to even pretend to support these functions but, they
-  get pulled in by other libraries.
-*/
- 
-int read(int file, char * ptr , int len) {   return 0 ; }
-int close (int file) { return -1 ; }
-int write(int file , char * ptr, int len) { return 0 ; }
-/*eof*/
diff --git a/libgloss/mips/nullmon.ld b/libgloss/mips/nullmon.ld
deleted file mode 100644
index c90aed308..000000000
--- a/libgloss/mips/nullmon.ld
+++ /dev/null
@@ -1,179 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:4000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lnullmon -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0xA0020000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-   . = ALIGN(64) ;
-   end = .;
-   _end = .;
-
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-
-  /* Special sections generated by gcc */
-  /* Newer GNU linkers strip by default */
-  .mdebug.abi32            0 : { KEEP(*(.mdebug.abi32)) }
-  .mdebug.abiN32           0 : { KEEP(*(.mdebug.abiN32)) }
-  .mdebug.abi64            0 : { KEEP(*(.mdebug.abi64)) }
-  .mdebug.abiO64           0 : { KEEP(*(.mdebug.abiO64)) }
-  .mdebug.eabi32           0 : { KEEP(*(.mdebug.eabi32)) }
-  .mdebug.eabi64           0 : { KEEP(*(.mdebug.eabi64)) }
-  .gcc_compiled_long32     0 : { KEEP(*(.gcc_compiled_long32)) }
-  .gcc_compiled_long64     0 : { KEEP(*(.gcc_compiled_long64)) }
-}
diff --git a/libgloss/mips/pmon.S b/libgloss/mips/pmon.S
deleted file mode 100644
index 54859797e..000000000
--- a/libgloss/mips/pmon.S
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * pmon.S -- low-level entry points into PMON monitor.
- *
- * Copyright (c) 1996, 1997, 2002 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#if !defined(__mips64)
-  /* This machine does not support 64-bit operations.  */
-  #define ADDU addu
-  #define SUBU subu
-#else
-  /* This machine supports 64-bit operations.  */
-  #define ADDU daddu
-  #define SUBU dsubu
-#endif
-
-#include "regs.S"
-
-	.text
-	.align	2
-
-#ifdef LSI
-  #define PMON_VECTOR 0xffffffffbfc00200
-#else
-  #define PMON_VECTOR 0xffffffffbfc00500
-#endif
-
-#ifndef __mips_eabi
-/* Provide named functions for entry into the monitor: */
-#define INDIRECT(name,index)				\
-	.globl	name;					\
-	.ent	name;					\
-	.set	noreorder;				\
-name:	la	$2,+(PMON_VECTOR+((index)*4));		\
-	lw	$2,0($2);				\
-	j	$2;					\
-	nop;						\
-	.set	reorder;				\
-	.end	name
-
-#else
-#define INDIRECT(name,index)				\
-	.globl	name;					\
-	.ent	name;					\
-	.set	noreorder;				\
-name:	la	$2,+(PMON_VECTOR+((index)*4));		\
-	lw	$2,0($2);				\
-	SUBU	sp,sp,0x40;				\
-	sd	ra,0x38(sp);				\
-	sd	fp,0x30(sp);				\
-	jal	$2;					\
-	move	fp,sp;					\
-	ld	ra,0x38(sp);				\
-	ld	fp,0x30(sp);				\
-	j	ra;					\
-	ADDU	sp,sp,0x40;				\
-	.set	reorder;				\
-	.end	name
-#endif
-
-
-/* The following magic numbers are for the slots into the PMON monitor */
-/* The first are used as the lo-level library run-time: */
-INDIRECT(read,0)
-INDIRECT(write,1)
-INDIRECT(open,2)
-INDIRECT(close,3)
-/* The following are useful monitor routines: */
-INDIRECT(mon_ioctl,4)
-INDIRECT(mon_printf,5)
-INDIRECT(mon_vsprintf,6)
-INDIRECT(mon_ttctl,7)
-INDIRECT(mon_cliexit,8)
-INDIRECT(mon_getenv,9)
-INDIRECT(mon_onintr,10)
-INDIRECT(mon_flush_cache,11)
-INDIRECT(_flush_cache,11)
-INDIRECT(mon_exception,12)
-
-/* The following routine is required by the "print()" function: */
-	.globl	outbyte
-	.ent	outbyte
-	.set	noreorder
-outbyte:
-	subu	sp,sp,0x20	/* allocate stack space for string */
-	sd	ra,0x18(sp)	/* stack return address */
-	sd	fp,0x10(sp)	/* stack frame-pointer */
-	move	fp,sp		/* take a copy of the stack pointer */
-	/* We leave so much space on the stack for the string (16
-	   characters), since the call to mon_printf seems to corrupt
-	   the 8bytes at offset 8 into the string/stack. */
-	sb	a0,0x00(sp)	/* character to print */
-	sb	z0,0x01(sp)	/* NUL terminator */
-	jal	mon_printf	/* and output the string */
-	move	a0,sp		/* take a copy of the string pointer {DELAY SLOT} */
-
-	move	sp,fp		/* recover stack pointer */
-	ld	ra,0x18(sp)	/* recover return address */
-	ld	fp,0x10(sp)	/* recover frame-pointer */
-	j	ra		/* return to the caller */
-	addu	sp,sp,0x20	/* dump the stack space {DELAY SLOT} */
-	.set	reorder
-	.end	outbyte
-
-/* The following routine is required by the "sbrk()" function: */
-	.globl	get_mem_info
-	.ent	get_mem_info
-	.set	noreorder
-get_mem_info:
-	# in:  a0 = pointer to 3 word structure
-	# out: void
-	subu	sp,sp,0x18	/* create some stack space */
-	sd	ra,0x00(sp)	/* stack return address */
-	sd	fp,0x08(sp)	/* stack frame-pointer */
-	sd	a0,0x10(sp)	/* stack structure pointer */
-	move	fp,sp		/* take a copy of the stack pointer */
-
-	# The monitor has already sized memory, but unfortunately we
-	# do not have access to the data location containing the
-	# memory size.
-
-	jal	__sizemem
-	nop
-
-	ld	a0,0x10(sp)	# recover structure pointer
-	sw	v0,0(a0)	# amount of memory available
-
-	# Deal with getting the cache size information:
-	mfc0	a1, C0_CONFIG
-	nop
-	nop
-	andi	a2,a1,0x7 << 9	# bits 11..9 for instruction cache size
-	sll	a2,a2,12 - 8
-	sw 	a2,4(a0)
-	andi	a2,a1,0x7 << 6	# bits 8..6 for data cache size
-	sll	a2,a2,12 - 5
-	sw 	a2,8(a0)	# data cache size
-	#
-	move	sp,fp		/* recover stack pointer */
-	ld	ra,0x00(sp)	/* recover return address */
-	ld	fp,0x08(sp)	/* recover frame-pointer */
-	j	ra		/* return to the caller */
-	addu	sp,sp,0x18	/* restore stack pointer {DELAY SLOT} */
-	.set	reorder
-	.end	get_mem_info
-
-#ifdef LSI
-
-# For the LSI MiniRISC board, we can safely assume that we have
-# at least one megabyte of RAM.
-
-	.globl	__sizemem
-	.ent	__sizemem
-__sizemem:
-	li	v0,0x100000
-	j	ra
-	.end	__sizemem
-#else
-
-
-#endif
-/* EOF pmon.S */
diff --git a/libgloss/mips/pmon.ld b/libgloss/mips/pmon.ld
deleted file mode 100644
index 81fd8ee31..000000000
--- a/libgloss/mips/pmon.ld
+++ /dev/null
@@ -1,178 +0,0 @@
-/* The following TEXT start address leaves space for the monitor
-   workspace. */
-
-ENTRY(_start)
-STARTUP(crt0.o)
-OUTPUT_ARCH("mips:4000")
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-littlemips")
-GROUP(-lc -lpmon -lgcc)
-SEARCH_DIR(.)
-__DYNAMIC  =  0;
-
-/*
- * Allocate the stack to be at the top of memory, since the stack
- * grows down
- */
-PROVIDE (__stack = 0);
-/* PROVIDE (__global = 0); */
-
-/*
- * Initalize some symbols to be zero so we can reference them in the
- * crt0 without core dumping. These functions are all optional, but
- * we do this so we can have our crt0 always use them if they exist. 
- * This is so BSPs work better when using the crt0 installed with gcc.
- * We have to initalize them twice, so we multiple object file
- * formats, as some prepend an underscore.
- */
-PROVIDE (hardware_exit_hook = 0);
-PROVIDE (hardware_hazard_hook = 0);
-PROVIDE (hardware_init_hook = 0);
-PROVIDE (software_init_hook = 0);
-
-SECTIONS
-{	
-  . = 0xA0020000;
-  .text : {
-     _ftext = . ;
-    KEEP (*(.init))
-     eprol  =  .;
-    *(.text)
-    *(.text.*)
-    *(.gnu.linkonce.t.*)
-    *(.mips16.fn.*)
-    *(.mips16.call.*)
-    PROVIDE (__runtime_reloc_start = .);
-    *(.rel.sdata)
-    PROVIDE (__runtime_reloc_stop = .);
-    KEEP (*(.fini))
-     etext  =  .;
-     _etext  =  .;
-  }
-  
-  .eh_frame_hdr : { *(.eh_frame_hdr) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
-  .jcr : { KEEP (*(.jcr)) }
-  .ctors    :
-  {
-    /* gcc uses crtbegin.o to find the start of
-       the constructors, so we make sure it is
-       first.  Because this is a wildcard, it
-       doesn't matter if the user does not
-       actually link against crtbegin.o; the
-       linker won't look for a file to match a
-       wildcard.  The wildcard also means that it
-       doesn't matter which directory crtbegin.o
-       is in.  */
-
-    KEEP (*crtbegin.o(.ctors))
-
-    /* We don't want to include the .ctor section from
-       from the crtend.o file until after the sorted ctors.
-       The .ctor section from the crtend file contains the
-       end of ctors marker and it must be last */
-
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-  }
-
-  .dtors    :
-  {
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-  }
-
-  . = .;
-  .rodata : {
-    *(.rdata)
-    *(.rodata)
-    *(.rodata.*)
-    *(.gnu.linkonce.r.*)
-  }
-   _fdata = ALIGN(16);
-  .data : {
-    *(.data)
-    *(.data.*)
-    *(.gnu.linkonce.d.*)
-  }
-  . = ALIGN(8);
-  _gp = . + 0x8000;
-  __global = _gp;
-  .lit8 : {
-    *(.lit8)
-  }
-  .lit4 : {
-    *(.lit4)
-  }
-  .sdata : {
-    *(.sdata)
-    *(.sdata.*)
-    *(.gnu.linkonce.s.*)
-  }
-  . = ALIGN(4);
-   edata  =  .;
-   _edata  =  .;
-   _fbss = .;
-  .sbss : {
-    *(.sbss)
-    *(.sbss.*)
-    *(.gnu.linkonce.sb.*)
-    *(.scommon)
-  }
-  .bss : {
-    _bss_start = . ;
-    *(.bss)
-    *(.bss.*)
-    *(.gnu.linkonce.b.*)
-    *(COMMON)
-  }
-
-   end = .;
-   _end = .;
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to 
-     the beginning of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-  .debug_ranges   0 : { *(.debug_ranges) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-
-  /* Special sections generated by gcc */
-  /* Newer GNU linkers strip by default */
-  .mdebug.abi32            0 : { KEEP(*(.mdebug.abi32)) }
-  .mdebug.abiN32           0 : { KEEP(*(.mdebug.abiN32)) }
-  .mdebug.abi64            0 : { KEEP(*(.mdebug.abi64)) }
-  .mdebug.abiO64           0 : { KEEP(*(.mdebug.abiO64)) }
-  .mdebug.eabi32           0 : { KEEP(*(.mdebug.eabi32)) }
-  .mdebug.eabi64           0 : { KEEP(*(.mdebug.eabi64)) }
-  .gcc_compiled_long32     0 : { KEEP(*(.gcc_compiled_long32)) }
-  .gcc_compiled_long64     0 : { KEEP(*(.gcc_compiled_long64)) }
-}
diff --git a/libgloss/mips/regs.S b/libgloss/mips/regs.S
deleted file mode 100644
index bdf933f13..000000000
--- a/libgloss/mips/regs.S
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * regs.S -- standard MIPS register names.
- *
- * Copyright (c) 1995 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-/* Standard MIPS register names: */
-#define zero	$0
-#define z0	$0
-#define v0	$2
-#define v1	$3
-#define a0	$4
-#define a1	$5
-#define a2	$6
-#define a3	$7
-#define t0	$8
-#define t1	$9
-#define t2	$10
-#define t3	$11
-#define t4	$12
-#define t5	$13
-#define t6	$14
-#define t7	$15
-#define s0	$16
-#define s1	$17
-#define s2	$18
-#define s3	$19
-#define s4	$20
-#define s5	$21
-#define s6	$22
-#define s7	$23
-#define t8	$24
-#define t9	$25
-#define k0	$26	/* kernel private register 0 */
-#define k1	$27	/* kernel private register 1 */
-#define gp	$28	/* global data pointer */
-#define sp 	$29	/* stack-pointer */
-#define fp	$30	/* frame-pointer */
-#define ra	$31	/* return address */
-#define pc	$pc	/* pc, used on mips16 */
-
-#define fp0	$f0
-#define fp1	$f1
-
-/* Useful memory constants: */
-#ifndef __mips64
-#define K0BASE          0x80000000
-#define K1BASE		0xA0000000
-#define K0BASE_ADDR	((char *)K0BASE)
-#define K1BASE_ADDR	((char *)K1BASE)
-#else
-#define K0BASE          0xFFFFFFFF80000000
-#define K1BASE		0xFFFFFFFFA0000000
-#define K0BASE_ADDR	((char *)0xFFFFFFFF80000000LL)
-#define K1BASE_ADDR	((char *)0xFFFFFFFFA0000000LL)
-#endif
-
-#define PHYS_TO_K1(a)   ((unsigned)(a) | K1BASE)
-
-/* Standard Co-Processor 0 registers */
-#define C0_COUNT	$9		/* Count Register */
-#define C0_SR		$12		/* Status Register */
-#define C0_CAUSE	$13		/* last exception description */
-#define C0_EPC		$14		/* Exception error address */
-#define C0_PRID		$15		/* Processor Revision ID */
-#define C0_CONFIG	$16		/* CPU configuration */
-
-/* Standard Processor Revision ID Register field offsets */
-#define PR_IMP	8
-
-/* Standard Config Register field offsets */
-#define CR_DB	4
-#define CR_IB	5
-#define CR_DC	6	/* NOTE v4121 semantics != 43,5xxx semantics */
-#define CR_IC	9	/* NOTE v4121 semantics != 43,5xxx semantics */
-#define CR_SC	17
-#define CR_SS	20
-#define CR_SB	22
-
-
-/* Standard Status Register bitmasks: */
-#define SR_CU1		0x20000000	/* Mark CP1 as usable */
-#define SR_FR		0x04000000	/* Enable MIPS III FP registers */
-#define SR_BEV		0x00400000	/* Controls location of exception vectors */
-#define SR_PE		0x00100000	/* Mark soft reset (clear parity error) */
-
-#define SR_KX		0x00000080	/* Kernel extended addressing enabled */
-#define SR_SX		0x00000040	/* Supervisor extended addressing enabled */
-#define SR_UX		0x00000020	/* User extended addressing enabled */
-
-/* Standard (R4000) cache operations. Taken from "MIPS R4000
-   Microprocessor User's Manual" 2nd edition: */
-
-#define CACHE_I		(0)	/* primary instruction */
-#define CACHE_D		(1)	/* primary data */
-#define CACHE_SI	(2)	/* secondary instruction */
-#define CACHE_SD	(3)	/* secondary data (or combined instruction/data) */
-
-#define INDEX_INVALIDATE		(0)	/* also encodes WRITEBACK if CACHE_D or CACHE_SD */
-#define INDEX_LOAD_TAG			(1)
-#define INDEX_STORE_TAG			(2)
-#define CREATE_DIRTY_EXCLUSIVE		(3)	/* CACHE_D and CACHE_SD only */
-#define HIT_INVALIDATE			(4)
-#define CACHE_FILL			(5)	/* CACHE_I only */
-#define HIT_WRITEBACK_INVALIDATE	(5)	/* CACHE_D and CACHE_SD only */
-#define HIT_WRITEBACK			(6)	/* CACHE_I, CACHE_D and CACHE_SD only */
-#define HIT_SET_VIRTUAL			(7)	/* CACHE_SI and CACHE_SD only */
-
-#define BUILD_CACHE_OP(o,c)		(((o) << 2) | (c))
-
-/* Individual cache operations: */
-#define INDEX_INVALIDATE_I		BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_I)
-#define INDEX_WRITEBACK_INVALIDATE_D	BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_D)
-#define INDEX_INVALIDATE_SI             BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SI)
-#define INDEX_WRITEBACK_INVALIDATE_SD	BUILD_CACHE_OP(INDEX_INVALIDATE,CACHE_SD)
-
-#define INDEX_LOAD_TAG_I		BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_I)
-#define INDEX_LOAD_TAG_D                BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_D)
-#define INDEX_LOAD_TAG_SI               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SI)
-#define INDEX_LOAD_TAG_SD               BUILD_CACHE_OP(INDEX_LOAD_TAG,CACHE_SD)
-
-#define INDEX_STORE_TAG_I              	BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_I)
-#define INDEX_STORE_TAG_D               BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_D)
-#define INDEX_STORE_TAG_SI              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SI)
-#define INDEX_STORE_TAG_SD              BUILD_CACHE_OP(INDEX_STORE_TAG,CACHE_SD)
-
-#define CREATE_DIRTY_EXCLUSIVE_D        BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_D)
-#define CREATE_DIRTY_EXCLUSIVE_SD       BUILD_CACHE_OP(CREATE_DIRTY_EXCLUSIVE,CACHE_SD)
-
-#define HIT_INVALIDATE_I                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_I)
-#define HIT_INVALIDATE_D                BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_D)
-#define HIT_INVALIDATE_SI               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SI)
-#define HIT_INVALIDATE_SD               BUILD_CACHE_OP(HIT_INVALIDATE,CACHE_SD)
-
-#define CACHE_FILL_I                    BUILD_CACHE_OP(CACHE_FILL,CACHE_I)
-#define HIT_WRITEBACK_INVALIDATE_D      BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_D)
-#define HIT_WRITEBACK_INVALIDATE_SD     BUILD_CACHE_OP(HIT_WRITEBACK_INVALIDATE,CACHE_SD)
-
-#define HIT_WRITEBACK_I                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_I)
-#define HIT_WRITEBACK_D                 BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_D)
-#define HIT_WRITEBACK_SD                BUILD_CACHE_OP(HIT_WRITEBACK,CACHE_SD)
-
-#define HIT_SET_VIRTUAL_SI		BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SI)
-#define HIT_SET_VIRTUAL_SD              BUILD_CACHE_OP(HIT_SET_VIRTUAL,CACHE_SD)
-
-/*> EOF regs.S <*/
diff --git a/libgloss/mips/syscalls.c b/libgloss/mips/syscalls.c
deleted file mode 100644
index 3ab543674..000000000
--- a/libgloss/mips/syscalls.c
+++ /dev/null
@@ -1,45 +0,0 @@
-#include <_ansi.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-#include "regs.S"
-
-extern char _end[];
-
-/* FIXME: This is not ideal, since we do a get_mem_info() call for
-   every sbrk() call. */
-char *
-sbrk (nbytes)
-     int nbytes;
-{
-  static char *heap_ptr = _end;
-  static char *heap_start = _end;
-  char        *base;
-  struct s_mem {
-    unsigned int size;
-    unsigned int icsize;
-    unsigned int dcsize;
-  } mem;
-  unsigned int avail = 0;
-
-  /* The sizeof (s_mem.size) must be 4 bytes.  The compiler should be
-     able to eliminate this check */
-  if (sizeof (unsigned int) != 4)
-    return (char *)-1;
-
-  get_mem_info(&mem);
-  /* NOTE: The value returned from the get_mem_info call is the amount
-     of memory, and not the address of the (last byte + 1) */
-
-  if (((size_t)heap_ptr >= heap_start) && ((size_t)heap_ptr < (heap_start + mem.size))) {
-    avail = (heap_start + mem.size) - (size_t)heap_ptr;
-    base = heap_ptr;
-  } /* else will fail since "nbytes" will be greater than zeroed "avail" value */
-
-  if ((nbytes > avail) || (heap_ptr + nbytes < _end))
-   base = (char *)-1;
-  else
-   heap_ptr += nbytes;
-
-  return base;
-}
diff --git a/libgloss/mips/test.c b/libgloss/mips/test.c
deleted file mode 100644
index a99347914..000000000
--- a/libgloss/mips/test.c
+++ /dev/null
@@ -1,13 +0,0 @@
-main()
-{
-  outbyte ('&');
-  outbyte ('@');
-  outbyte ('$');
-  outbyte ('%');
-
-  /* whew, we made it */
-  
-  print ("\r\nDone...");
-
-  return;
-}
diff --git a/libgloss/mips/vr4300.S b/libgloss/mips/vr4300.S
deleted file mode 100644
index 9737ddc9e..000000000
--- a/libgloss/mips/vr4300.S
+++ /dev/null
@@ -1,341 +0,0 @@
-/*
- * vr4300.S -- CPU specific support routines
- *
- * Copyright (c) 1995,1996 Cygnus Support
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-#ifndef __mips64
-	.set mips3
-#endif
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#include "regs.S"
-
-	.text
-	.align	2
-
-	# Taken from "R4300 Preliminary RISC Processor Specification
-	# Revision 2.0 January 1995" page 39: "The Count
-	# register... increments at a constant rate... at one-half the
-	# PClock speed."
-	# We can use this fact to provide small polled delays.
-	.globl	__cpu_timer_poll
-	.ent	__cpu_timer_poll
-__cpu_timer_poll:
-	.set	noreorder
-	# in:	a0 = (unsigned int) number of PClock ticks to wait for
-	# out:	void
-
-	# The Vr4300 counter updates at half PClock, so divide by 2 to
-	# get counter delta:
-	bnezl	a0, 1f		# continue if delta non-zero
-	srl	a0, a0, 1	# divide ticks by 2		{DELAY SLOT}
-	# perform a quick return to the caller:
-	j	ra
-	nop			#				{DELAY SLOT}
-1:
-	mfc0	v0, C0_COUNT	# get current counter value
-	nop
-	nop
-	# We cannot just do the simple test, of adding our delta onto
-	# the current value (ignoring overflow) and then checking for
-	# equality. The counter is incrementing every two PClocks,
-	# which means the counter value can change between
-	# instructions, making it hard to sample at the exact value
-	# desired.
-
-	# However, we do know that our entry delta value is less than
-	# half the number space (since we divide by 2 on entry). This
-	# means we can use a difference in signs to indicate timer
-	# overflow.
-	addu	a0, v0, a0	# unsigned add (ignore overflow)
-	# We know have our end value (which will have been
-	# sign-extended to fill the 64bit register value).
-2:
-	# get current counter value:
-	mfc0	v0, C0_COUNT
-	nop
-	nop
-	# This is an unsigned 32bit subtraction:
-	subu	v0, a0, v0	# delta = (end - now)		{DELAY SLOT}
-	bgtzl	v0, 2b		# looping back is most likely
-	nop
-	# We have now been delayed (in the foreground) for AT LEAST
-	# the required number of counter ticks.
-	j	ra		# return to caller
-	nop			#				{DELAY SLOT}
-	.set	reorder
-	.end	__cpu_timer_poll
-
-	# Flush the processor caches to memory:
-
-	.globl	__cpu_flush
-	.ent	__cpu_flush
-__cpu_flush:
-	.set	noreorder
-	# NOTE: The Vr4300 *CANNOT* have any secondary cache (bit 17
-	# of the CONFIG registered is hard-wired to 1). We just
-	# provide code to flush the Data and Instruction caches.
-
-	# Even though the Vr4300 has hard-wired cache and cache line
-	# sizes, we still interpret the relevant Config register
-	# bits. This allows this code to be used for other conforming
-	# MIPS architectures if desired.
-
-	# Get the config register
-	mfc0	a0, C0_CONFIG
-	nop
-	nop
-	li	a1, 1		# a useful constant
-	#
-	srl	a2, a0, 9	# bits 11..9 for instruction cache size
-	andi	a2, a2, 0x7	# 3bits of information
-	add	a2, a2, 12	# get full power-of-2 value
-	sllv	a2, a1, a2	# instruction cache size
-	#
-	srl	a3, a0, 6	# bits 8..6 for data cache size
-	andi	a3, a3, 0x7	# 3bits of information
-	add	a3, a3, 12	# get full power-of-2 value
-	sllv	a3, a1, a3	# data cache size
-	#
-	li	a1, (1 << 5)	# check IB (instruction cache line size)
-	and	a1, a0, a1	# mask against the CONFIG register value
-	beqz	a1, 1f		# branch on result of delay slot operation
-	nop
-	li	a1, 32		# non-zero, then 32bytes
-	j	2f		# continue
-	nop
-1:
-	li	a1, 16		# 16bytes
-2:
-	#
-	li	t0, (1 << 4)	# check DB (data cache line size)
-	and	a0, a0, t0	# mask against the CONFIG register value
-	beqz	a0, 3f		# branch on result of delay slot operation
-	nop
-	li	a0, 32		# non-zero, then 32bytes
-	j	4f		# continue
-	nop
-3:
-	li	a0, 16		# 16bytes
-4:
-	#
-	# a0 = data cache line size
-	# a1 = instruction cache line size
-	# a2 = instruction cache size
-	# a3 = data cache size
-	#
-	lui	t0, ((K0BASE >> 16) & 0xFFFF)
-	ori	t0, t0, (K0BASE & 0xFFFF)
-	addu	t1, t0, a2	# end cache address
-	subu	t2, a1, 1	# line size mask
-	not	t2		# invert the mask
-	and	t3, t0, t2	# get start address
-	addu	t1, -1
-	and	t1, t2		# get end address
-5:
-	cache	INDEX_INVALIDATE_I,0(t3)
-	bne	t3, t1, 5b
-	addu	t3, a1
-	#
-	addu	t1, t0, a3	# end cache address
-	subu	t2, a0, 1	# line size mask
-	not	t2		# invert the mask
-	and	t3, t0, t2	# get start address
-	addu	t1, -1
-	and	t1, t2		# get end address
-6:
-	cache	INDEX_WRITEBACK_INVALIDATE_D,0(t3)
-	bne	t3, t1, 6b
-	addu	t3, a0
-	#
-	j	ra	# return to the caller
-	nop
-	.set	reorder
-	.end	__cpu_flush
-
-	# NOTE: This variable should *NOT* be addressed relative to
-	# the $gp register since this code is executed before $gp is
-	# initialised... hence we leave it in the text area. This will
-	# cause problems if this routine is ever ROMmed:
-
-	.globl	__buserr_cnt
-__buserr_cnt:
-	.word	0
-	.align	3
-__k1_save:
-	.word	0
-	.word	0
-	.align	2
-
-        .ent __buserr
-        .globl __buserr
-__buserr:
-        .set noat
-	.set noreorder
-	# k0 and k1 available for use:
-	mfc0	k0,C0_CAUSE
-	nop
-	nop
-	andi	k0,k0,0x7c
-	sub	k0,k0,7 << 2
-	beq	k0,$0,__buserr_do
-	nop
-	# call the previous handler
-	la	k0,__previous
-	jr	k0
-	nop
-	#
-__buserr_do:
-	# TODO: check that the cause is indeed a bus error
-	# - if not then just jump to the previous handler
-	la	k0,__k1_save
-	sd	k1,0(k0)
-	#
-        la      k1,__buserr_cnt
-        lw      k0,0(k1)        # increment counter
-        addu    k0,1
-        sw      k0,0(k1)
-	#
-	la	k0,__k1_save
-	ld	k1,0(k0)
-	#
-        mfc0    k0,C0_EPC
-	nop
-	nop
-        addu    k0,k0,4		# skip offending instruction
-	mtc0	k0,C0_EPC	# update EPC
-	nop
-	nop
-	eret
-#        j       k0
-#        rfe
-        .set reorder
-        .set at
-        .end __buserr
-
-__exception_code:
-	.set noreorder
-	lui	k0,%hi(__buserr)
-	daddiu	k0,k0,%lo(__buserr)
-	jr	k0
-	nop
-	.set reorder
-__exception_code_end:
-
-	.data
-__previous:
-	.space	(__exception_code_end - __exception_code)
-	# This subtracting two addresses is working
-	# but is not garenteed to continue working.
-	# The assemble reserves the right to put these
-	# two labels into different frags, and then
-	# cant take their difference.
-
-	.text
-
-	.ent	__default_buserr_handler
-	.globl	__default_buserr_handler
-__default_buserr_handler:
-        .set noreorder
-	# attach our simple bus error handler:
-	# in:  void
-	# out: void
-	mfc0	a0,C0_SR
-	nop
-	li	a1,SR_BEV
-	and	a1,a1,a0
-	beq	a1,$0,baseaddr
-	lui	a0,0x8000	# delay slot
-	lui	a0,0xbfc0
-	daddiu	a0,a0,0x0200
-baseaddr:
-	daddiu	a0,a0,0x0180
-	# a0 = base vector table address
-	la	a1,__exception_code_end
-	la	a2,__exception_code
-	subu	a1,a1,a2
-	la	a3,__previous
-	# there must be a better way of doing this????
-copyloop:
-	lw	v0,0(a0)
-	sw	v0,0(a3)
-	lw	v0,0(a2)
-	sw	v0,0(a0)
-	daddiu	a0,a0,4
-	daddiu	a2,a2,4
-	daddiu	a3,a3,4
-	subu	a1,a1,4
-	bne	a1,$0,copyloop
-	nop
-        la      a0,__buserr_cnt
-	sw	$0,0(a0)
-	j	ra
-	nop
-        .set reorder
-	.end	__default_buserr_handler
-
-	.ent	__restore_buserr_handler
-	.globl	__restore_buserr_handler
-__restore_buserr_handler:
-        .set noreorder
-	# restore original (monitor) bus error handler
-	# in:  void
-	# out: void
-	mfc0	a0,C0_SR
-	nop
-	li	a1,SR_BEV
-	and	a1,a1,a0
-	beq	a1,$0,res_baseaddr
-	lui	a0,0x8000	# delay slot
-	lui	a0,0xbfc0
-	daddiu	a0,a0,0x0200
-res_baseaddr:
-	daddiu	a0,a0,0x0180
-	# a0 = base vector table address
-	la	a1,__exception_code_end
-	la	a3,__exception_code
-	subu	a1,a1,a3
-	la	a3,__previous
-	# there must be a better way of doing this????
-res_copyloop:
-	lw	v0,0(a3)
-	sw	v0,0(a0)
-	daddiu	a0,a0,4
-	daddiu	a3,a3,4
-	subu	a1,a1,4
-	bne	a1,$0,res_copyloop
-	nop
-	j	ra
-	nop
-        .set reorder
-	.end	__restore_buserr_handler
-
-	.ent	__buserr_count
-	.globl	__buserr_count
-__buserr_count:
-        .set noreorder
-	# restore original (monitor) bus error handler
-	# in:  void
-	# out: unsigned int __buserr_cnt
-        la      v0,__buserr_cnt
-	lw	v0,0(v0)
-	j	ra
-	nop
-        .set reorder
-	.end	__buserr_count
-
-/* EOF vr4300.S */
diff --git a/libgloss/mips/vr5xxx.S b/libgloss/mips/vr5xxx.S
deleted file mode 100644
index f89e88a9a..000000000
--- a/libgloss/mips/vr5xxx.S
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * vr5xxx.S -- CPU specific support routines
- *
- * Copyright (c) 1999 Cygnus Solutions
- *
- * The authors hereby grant permission to use, copy, modify, distribute,
- * and license this software and its documentation for any purpose, provided
- * that existing copyright notices are retained in all copies and that this
- * notice is included verbatim in any distributions. No written agreement,
- * license, or royalty fee is required for any of the authorized uses.
- * Modifications to this software may be copyrighted by their authors
- * and need not follow the licensing terms described here, provided that
- * the new terms are clearly indicated on the first page of each file where
- * they apply.
- */
-
-/* This file cloned from vr4300.S by dlindsay@cygnus.com
- * and recoded to suit Vr5432 and Vr5000.
- * Should be no worse for Vr43{00,05,10}.
- * Specifically, __cpu_flush() has been changed (a) to allow for the hardware
- * difference (in set associativity) between the Vr5432 and Vr5000,
- * and (b) to flush the optional secondary cache of the Vr5000.
- */
-
-/* Processor Revision Identifier (PRID) Register: Implementation Numbers */
-#define IMPL_VR5432	0x54
-
-/* Cache Constants not determinable dynamically */
-#define VR5000_2NDLINE 32	/* secondary cache line size */
-#define VR5432_LINE 32		/* I,Dcache line sizes */
-#define VR5432_SIZE (16*1024)	/* I,Dcache half-size */
-
-
-#ifndef __mips64
-	.set mips3
-#endif
-#ifdef __mips16
-/* This file contains 32 bit assembly code.  */
-	.set nomips16
-#endif
-
-#include "regs.S"
-
-	.text
-	.align	2
-
-	# Taken from "R4300 Preliminary RISC Processor Specification
-	# Revision 2.0 January 1995" page 39: "The Count
-	# register... increments at a constant rate... at one-half the
-	# PClock speed."
-	# We can use this fact to provide small polled delays.
-	.globl	__cpu_timer_poll
-	.ent	__cpu_timer_poll
-__cpu_timer_poll:
-	.set	noreorder
-	# in:	a0 = (unsigned int) number of PClock ticks to wait for
-	# out:	void
-
-	# The Vr4300 counter updates at half PClock, so divide by 2 to
-	# get counter delta:
-	bnezl	a0, 1f		# continue if delta non-zero
-	srl	a0, a0, 1	# divide ticks by 2		{DELAY SLOT}
-	# perform a quick return to the caller:
-	j	ra
-	nop			#				{DELAY SLOT}
-1:
-	mfc0	v0, C0_COUNT	# get current counter value
-	nop
-	nop
-	# We cannot just do the simple test, of adding our delta onto
-	# the current value (ignoring overflow) and then checking for
-	# equality. The counter is incrementing every two PClocks,
-	# which means the counter value can change between
-	# instructions, making it hard to sample at the exact value
-	# desired.
-
-	# However, we do know that our entry delta value is less than
-	# half the number space (since we divide by 2 on entry). This
-	# means we can use a difference in signs to indicate timer
-	# overflow.
-	addu	a0, v0, a0	# unsigned add (ignore overflow)
-	# We know have our end value (which will have been
-	# sign-extended to fill the 64bit register value).
-2:
-	# get current counter value:
-	mfc0	v0, C0_COUNT
-	nop
-	nop
-	# This is an unsigned 32bit subtraction:
-	subu	v0, a0, v0	# delta = (end - now)		{DELAY SLOT}
-	bgtzl	v0, 2b		# looping back is most likely
-	nop
-	# We have now been delayed (in the foreground) for AT LEAST
-	# the required number of counter ticks.
-	j	ra		# return to caller
-	nop			#				{DELAY SLOT}
-	.set	reorder
-	.end	__cpu_timer_poll
-
-	# Flush the processor caches to memory:
-
-	.globl	__cpu_flush
-	.ent	__cpu_flush
-__cpu_flush:
-	.set	noreorder
-	# NOTE: The Vr4300 and Vr5432 *CANNOT* have any secondary cache.
-	# On those, SC (bit 17 of CONFIG register) is hard-wired to 1,
-	# except that email from Dennis_Han@el.nec.com says that old
-	# versions of the Vr5432 incorrectly hard-wired this bit to 0.
-	# The Vr5000 has an optional direct-mapped secondary cache,
-	# and the SC bit correctly indicates this.
-
-	# So, for the 4300 and 5432 we want to just
-	# flush the primary Data and Instruction caches.
-	# For the 5000 it is desired to flush the secondary cache too.
-	# There is an operation difference worth noting.
-	# The 4300 and 5000 primary caches use VA bit 14 to choose cache set,
-	# whereas 5432 primary caches use VA bit 0.
-
-	# This code interprets the relevant Config register bits as
-	# much as possible, except for the 5432.
-	# The code therefore has some portability.
-	# However, the associativity issues mean you should not just assume
-	# that this code works anywhere. Also, the secondary cache set
-	# size is hardwired, since the 5000 series does not define codes
-	# for variant sizes.
-
-	# Note: this version of the code flushes D$ before I$.
-	#   It is difficult to construct a case where that matters, 
-	#   but it cant hurt.
-
-	mfc0	a0, C0_PRID	# a0 = Processor Revision register
-	nop			# dlindsay: unclear why the nops, but
-	nop			# vr4300.S had such so I do too.
-	srl	a2, a0, PR_IMP	# want bits 8..15
-	andi	a2, a2, 0x255	# mask: now a2 = Implementation # field
-	li	a1, IMPL_VR5432
-	beq	a1, a2, 8f	# use Vr5432-specific flush algorithm
-	nop
-	
-	# Non-Vr5432 version of the code.
-	# (The distinctions being: CONFIG is truthful about secondary cache, 
-	# and we act as if the primary Icache and Dcache are direct mapped.)
-
-	mfc0	t0, C0_CONFIG	# t0 = CONFIG register
-	nop
-	nop
-	li	a1, 1		# a1=1, a useful constant
-
-	srl	a2, t0, CR_IC	# want IC field of CONFIG
-	andi	a2, a2, 0x7	# mask: now a2= code for Icache size
-	add	a2, a2, 12	# +12
-	sllv	a2, a1, a2	# a2=primary instruction cache size in bytes
-
-	srl	a3, t0, CR_DC	# DC field of CONFIG
-	andi	a3, a3, 0x7	# mask: now a3= code for Dcache size
-	add	a3, a3, 12	# +12
-	sllv	a3, a1, a3	# a3=primary data cache size in bytes
-
-	li	t2, (1 << CR_IB) # t2=mask over IB boolean
-	and	t2, t2, t0	# test IB field of CONFIG register value
-	beqz	t2, 1f		# 
-	li	a1, 16		# 16 bytes (branch shadow: always loaded.)
-	li	a1, 32		# non-zero, then 32bytes
-1:
-
-	li	t2, (1 << CR_DB) # t2=mask over DB boolean
-	and	t2, t2, t0	# test BD field of CONFIG register value
-	beqz	t2, 2f		# 
-	li	a0, 16		# 16bytes (branch shadow: always loaded.)
-	li	a0, 32		# non-zero, then 32bytes
-2:
-	lui	t1, ((K0BASE >> 16) & 0xFFFF)
-	ori	t1, t1, (K0BASE & 0xFFFF)
-
-	# At this point,
-	# a0 = primary Dcache line size in bytes
-	# a1 = primary Icache line size in bytes
-	# a2 = primary Icache size in bytes
-	# a3 = primary Dcache size in bytes
-	# t0 = CONFIG value
-	# t1 = a round unmapped cached base address (we are in kernel mode)
-	# t2,t3 scratch
-
-	addi	t3, t1, 0	# t3=t1=start address for any cache
-	add	t2, t3, a3	# t2=end adress+1 of Dcache
-	sub	t2, t2, a0	# t2=address of last line in Dcache
-3:
-	cache	INDEX_WRITEBACK_INVALIDATE_D,0(t3)
-	bne	t3, t2, 3b	# 
-	addu	t3, a0		# (delay slot) increment by Dcache line size
-
-
-	# Now check CONFIG to see if there is a secondary cache
-	lui	t2, (1 << (CR_SC-16)) # t2=mask over SC boolean
-	and	t2, t2, t0	# test SC in CONFIG
-	bnez	t2, 6f
-	
-	# There is a secondary cache. Find out its sizes.
-	
-	srl	t3, t0, CR_SS	# want SS field of CONFIG
-	andi	t3, t3, 0x3	# mask: now t3= code for cache size.
-	beqz	t3, 4f
-	lui	a3, ((512*1024)>>16)	# a3= 512K, code was 0
-	addu	t3, -1			# decrement code
-	beqz	t3, 4f
-	lui	a3, ((1024*1024)>>16)	# a3= 1 M, code  1
-	addu	t3, -1			# decrement code
-	beqz	t3, 4f
-	lui	a3, ((2*1024*1024)>>16)	# a3= 2 M, code 2
-	j	6f			# no secondary cache, code 3
-
-4:	# a3 = secondary cache size in bytes
-	li	a0, VR5000_2NDLINE	# no codes assigned for other than 32
-
-	# At this point,
-	# a0 = secondary cache line size in bytes
-	# a1 = primary Icache line size in bytes
-	# a2 = primary Icache size in bytes
-	# a3 = secondary cache size in bytes
-	# t1 = a round unmapped cached base address (we are in kernel mode)
-	# t2,t3 scratch
-	
-	addi	t3, t1, 0	# t3=t1=start address for any cache
-	add	t2, t3, a3	# t2=end address+1 of secondary cache
-	sub	t2, t2, a0	# t2=address of last line in secondary cache
-5:
-	cache	INDEX_WRITEBACK_INVALIDATE_SD,0(t3)
-	bne	t3, t2, 5b
-	addu	t3, a0		# (delay slot) increment by line size
-
-	
-6:	# Any optional secondary cache done.  Now do I-cache and return.
-
-	# At this point,
-	# a1 = primary Icache line size in bytes
-	# a2 = primary Icache size in bytes
-	# t1 = a round unmapped cached base address (we are in kernel mode)
-	# t2,t3 scratch
-
-	add	t2, t1, a2	# t2=end adress+1 of Icache
-	sub	t2, t2, a1	# t2=address of last line in Icache
-7:
-	cache	INDEX_INVALIDATE_I,0(t1)
-	bne	t1, t2, 7b
-	addu	t1, a1		# (delay slot) increment by Icache line size
-
-	j	ra	# return to the caller
-	nop
-
-8:
-
-# Vr5432 version of the cpu_flush code.
-# (The distinctions being: CONFIG can not be trusted about secondary
-# cache (which does not exist). The primary caches use Virtual Address Bit 0
-# to control set selection.
-
-# Code does not consult CONFIG about cache sizes: knows the hardwired sizes.
-# Since both I and D have the same size and line size, uses a merged loop.
-
-	li	a0, VR5432_LINE
-	li	a1, VR5432_SIZE
-	lui	t1, ((K0BASE >> 16) & 0xFFFF)
-	ori	t1, t1, (K0BASE & 0xFFFF)
-
-	# a0 = cache line size in bytes
-	# a1 = 1/2 cache size in bytes
-	# t1 = a round unmapped cached base address (we are in kernel mode)
-
-	add	t2, t1,	a1	# t2=end address+1
-	sub	t2, t2, a0	# t2=address of last line in Icache
-
-9:
-	cache	INDEX_WRITEBACK_INVALIDATE_D,0(t1)	# set 0
-	cache	INDEX_WRITEBACK_INVALIDATE_D,1(t1)	# set 1
-	cache	INDEX_INVALIDATE_I,0(t1)	# set 0
-	cache	INDEX_INVALIDATE_I,1(t1)	# set 1
-	bne	t1, t2, 9b
-	addu	t1, a0
-
-	j	ra	# return to the caller
-	nop
-	.set	reorder
-	.end	__cpu_flush
-
-	# NOTE: This variable should *NOT* be addressed relative to
-	# the $gp register since this code is executed before $gp is
-	# initialised... hence we leave it in the text area. This will
-	# cause problems if this routine is ever ROMmed:
-
-	.globl	__buserr_cnt
-__buserr_cnt:
-	.word	0
-	.align	3
-__k1_save:
-	.word	0
-	.word	0
-	.align	2
-
-        .ent __buserr
-        .globl __buserr
-__buserr:
-        .set noat
-	.set noreorder
-	# k0 and k1 available for use:
-	mfc0	k0,C0_CAUSE
-	nop
-	nop
-	andi	k0,k0,0x7c
-	sub	k0,k0,7 << 2
-	beq	k0,$0,__buserr_do
-	nop
-	# call the previous handler
-	la	k0,__previous
-	jr	k0
-	nop
-	#
-__buserr_do:
-	# TODO: check that the cause is indeed a bus error
-	# - if not then just jump to the previous handler
-	la	k0,__k1_save
-	sd	k1,0(k0)
-	#
-        la      k1,__buserr_cnt
-        lw      k0,0(k1)        # increment counter
-        addu    k0,1
-        sw      k0,0(k1)
-	#
-	la	k0,__k1_save
-	ld	k1,0(k0)
-	#
-        mfc0    k0,C0_EPC
-	nop
-	nop
-        addu    k0,k0,4		# skip offending instruction
-	mtc0	k0,C0_EPC	# update EPC
-	nop
-	nop
-	eret
-#        j       k0
-#        rfe
-        .set reorder
-        .set at
-        .end __buserr
-
-__exception_code:
-	.set noreorder
-	lui	k0,%hi(__buserr)
-	daddiu	k0,k0,%lo(__buserr)
-	jr	k0
-	nop
-	.set reorder
-__exception_code_end:
-
-	.data
-__previous:
-	.space	(__exception_code_end - __exception_code)
-	# This subtracting two addresses is working
-	# but is not garenteed to continue working.
-	# The assemble reserves the right to put these
-	# two labels into different frags, and then
-	# cant take their difference.
-
-	.text
-
-	.ent	__default_buserr_handler
-	.globl	__default_buserr_handler
-__default_buserr_handler:
-        .set noreorder
-	# attach our simple bus error handler:
-	# in:  void
-	# out: void
-	mfc0	a0,C0_SR
-	nop
-	li	a1,SR_BEV
-	and	a1,a1,a0
-	beq	a1,$0,baseaddr
-	lui	a0,0x8000	# delay slot
-	lui	a0,0xbfc0
-	daddiu	a0,a0,0x0200
-baseaddr:
-	daddiu	a0,a0,0x0180
-	# a0 = base vector table address
-	la	a1,__exception_code_end
-	la	a2,__exception_code
-	subu	a1,a1,a2
-	la	a3,__previous
-	# there must be a better way of doing this????
-copyloop:
-	lw	v0,0(a0)
-	sw	v0,0(a3)
-	lw	v0,0(a2)
-	sw	v0,0(a0)
-	daddiu	a0,a0,4
-	daddiu	a2,a2,4
-	daddiu	a3,a3,4
-	subu	a1,a1,4
-	bne	a1,$0,copyloop
-	nop
-        la      a0,__buserr_cnt
-	sw	$0,0(a0)
-	j	ra
-	nop
-        .set reorder
-	.end	__default_buserr_handler
-
-	.ent	__restore_buserr_handler
-	.globl	__restore_buserr_handler
-__restore_buserr_handler:
-        .set noreorder
-	# restore original (monitor) bus error handler
-	# in:  void
-	# out: void
-	mfc0	a0,C0_SR
-	nop
-	li	a1,SR_BEV
-	and	a1,a1,a0
-	beq	a1,$0,res_baseaddr
-	lui	a0,0x8000	# delay slot
-	lui	a0,0xbfc0
-	daddiu	a0,a0,0x0200
-res_baseaddr:
-	daddiu	a0,a0,0x0180
-	# a0 = base vector table address
-	la	a1,__exception_code_end
-	la	a3,__exception_code
-	subu	a1,a1,a3
-	la	a3,__previous
-	# there must be a better way of doing this????
-res_copyloop:
-	lw	v0,0(a3)
-	sw	v0,0(a0)
-	daddiu	a0,a0,4
-	daddiu	a3,a3,4
-	subu	a1,a1,4
-	bne	a1,$0,res_copyloop
-	nop
-	j	ra
-	nop
-        .set reorder
-	.end	__restore_buserr_handler
-
-	.ent	__buserr_count
-	.globl	__buserr_count
-__buserr_count:
-        .set noreorder
-	# restore original (monitor) bus error handler
-	# in:  void
-	# out: unsigned int __buserr_cnt
-        la      v0,__buserr_cnt
-	lw	v0,0(v0)
-	j	ra
-	nop
-        .set reorder
-	.end	__buserr_count
-
-/* EOF vr5xxx.S */
author	cvs2svn <>	2008-11-19 18:25:20 +0000
committer	cvs2svn <>	2008-11-19 18:25:20 +0000
commit	ee40f8d491c436074cc576643f9d988b67319e8a (patch)
tree	2497a7463a68744ea4f715f0ac57f7798813d92d /libgloss/mips
parent	7562a08bb4d038699468d4c592a9f856f8e36c48 (diff)
download	cygnal-ee40f8d491c436074cc576643f9d988b67319e8a.tar.gz cygnal-ee40f8d491c436074cc576643f9d988b67319e8a.tar.bz2 cygnal-ee40f8d491c436074cc576643f9d988b67319e8a.zip